الدوائر المتكاملة

DSPIC33CH256MP208-I/PT

DSPIC33CH256MP208-I/PT - Dual-Core 100MHz DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33CH256MP208-I/PT is a dual-core 16-bit Digital Signal Controller (DSC) that combines a 100 MIPS main core with a dedicated 100 MIPS slave core in a single 80-pin TQFP (PT) package. The device integrates 256 KB of Flash program memory, 32 KB of data RAM on the master side plus 16 KB on the slave core, and runs at up to 200 MHz (180 MHz for the master/slave pair) with integrated DSP and enhanced on-chip peripherals including high-resolution PWM and CAN Flexible Data-Rate (CAN FD). A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a Digital Signal Processor (DSP). The dsPIC33CH architecture is positioned within the broader Microchip taxonomy as: DSC -> Digital Signal Controller -> Microcontroller -> Embedded Processor -> Semiconductor. Unlike a pure MCU, the dsPIC33CH executes single-cycle MAC instructions and integrates DSP features directly into the core, eliminating the need for a separate DSP chip. The dual-core topology allows designers to run real-time control loops on the slave core while the master core handles communication, system management, or higher-level state machines. Key differentiating features include dual independent cores with isolated peripherals, high-resolution PWM (250 ps resolution) for precision motor control, four DAC outputs, twelve 16-bit ADC channels with up to 3.25 MSPS conversion rate, four analog comparators, and integrated op-amps. Functional Safety (FuSa) features and CAN FD support target automotive and industrial safety-critical applications. The device operates from a 3.0V to 3.6V supply and supports an industrial temperature range of -40C to +85C. The architecture uses a 24-bit instruction word with a 16-bit data path, allowing C-compiler-friendly code density while maintaining DSP throughput. The slave core can execute control algorithms (such as field-oriented control loops for motors) with deterministic timing independent of the master core's interrupt load. This isolation is critical for high-bandwidth digital power conversion and sensorless motor control. Typical applications include high-performance precision motor control (PMSM, BLDC, AC induction), digital power conversion (PFC, LLC, full-bridge converters), automotive sensor fusion, industrial automation drives, and functional safety systems. The high-resolution PWM and dual-core architecture make it particularly suitable for sensorless FOC motor control at switching frequencies above 100 kHz. When designing with this device, allocate adequate PCB area for thermal dissipation: although the TQFP-80 package typically dissipates less than 1W in motor-control use cases, the dual-core operation can push junction temperatures higher. Use Microchip's MPLAB X IDE with the dsPIC33CH plug-in for code development and the dsPIC33CH Motor Control Library for FOC reference firmware. This page synthesizes distributor pricing, dual-core architectural analysis, and pin-compatible alternatives for the DSPIC33CH256MP208-I/PT that are not available on individual distributor pages, enabling direct cross-shopping for engineers and procurement teams.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP208T-I/PT

DSPIC33CH256MP208T-I/PT - Dual-Core 100MHz DSC, 256KB Flash | Microchip

The Microchip DSPIC33CH256MP208T-I/PT is a dual-core 16-bit Digital Signal Controller (DSC) operating at up to 100 MIPS, integrating 256 KB of Flash memory and packaged in an 80-pin TQFP (12x12 mm). It belongs to the dsPIC33CH family, which combines a high-performance main core and a dedicated slave core on a single die, enabling deterministic real-time control with offloaded housekeeping tasks. The device targets high-performance, precision motor control, digital power conversion, and advanced sensing applications. A Digital Signal Controller (DSC) is a hybrid device that merges the interrupt-driven deterministic behavior of a microcontroller with the throughput and computational capability of a Digital Signal Processor (DSP). DSCs occupy the middle tier of the embedded-compute hierarchy between standard microcontrollers (MCU) and full DSPs, and they belong to the broader class of microcontrollers and embedded processors. The dsPIC33CH family's dual-core architecture extends this category by allowing partitioned firmware: the main core executes time-critical control loops while the slave core handles communications, housekeeping, or safety diagnostics. Key features include a 100 MIPS main core paired with a 100 MIPS slave core, 256 KB of on-chip Flash program memory, configurable 16 KB + 32 KB RAM partitions, a high-resolution PWM module suited for digital power and motor control, CAN FD support, multiple UART/SPI/I2C interfaces, and a 12-bit ADC with up to 3.5 MSPS conversion rate. The -I temperature grade specifies an industrial operating range of -40C to +85C. The 80-pin TQFP footprint simplifies PCB layout by providing generous pin spacing (0.5 mm pitch) versus dense QFN or BGA alternatives. The dual-core design enables hardware-based functional safety partitioning, deterministic task scheduling, and parallel algorithm execution that would otherwise require a separate companion MCU. Integrated peripherals such as the Configurable Logic Cell (CLC) and Peripheral Trigger Generator (PTG) allow glue logic to be implemented on-chip, reducing BOM cost and board area. The device is AEC-Q100 qualified in related variants, supporting automotive deployment. Typical applications include field-oriented control (FOC) of PMSM and BLDC motors, on-board EV charging, digital LLC and PFC converters, photovoltaic inverters, and high-density industrial SMPS designs. The slave core can offload housekeeping such as housekeeping communication stacks or peripheral management. Design considerations: 80-pin TQFP packages have higher thermal resistance than QFN equivalents - a copper pour beneath the package is recommended. Verify dual-core memory allocation in MPLAB X IDE before firmware development; the slave core requires a separate firmware image loaded into PRAM. Always consult the manufacturer datasheet for the latest pinout, errata, and electrical characteristics. This page synthesizes distributor pricing, drop-in same-package alternatives within the dsPIC33CH family, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP505-E/M4

DSPIC33CH256MP505-E/M4 - Dual-Core 100MHz DSC, 256KB Flash | Microchip

The Microchip DSPIC33CH256MP505-E/M4 is a dual-core 16-bit Digital Signal Controller (DSC) from the dsPIC33CH family, integrating a 100 MIPS main core and a 90 MIPS slave core in a 48-pin UQFN (6x6) package. The device combines 256 KB of Flash program memory with 32 KB RAM on the main core plus an additional 16 KB of slave-core PRAM, enabling partitioned real-time control where one core handles high-speed DSP tasks while the other manages housekeeping and communication. It operates from 3.0V to 3.6V and supports functional-safety (FuSa) capable design workflows for safety-critical embedded applications. Key features include dual dsPIC DSC cores with integrated DSP engine, high-resolution PWM (HRPWM) with 250 ps resolution, CAN-FD support, and up to 200 MHz maximum core operating frequency. The device integrates multiple analog peripherals (12-bit ADC, comparators, DAC), motor-control PWMs, and communication interfaces including SPI, I2C, UART, and CAN-FD. The main/slave inter-core communication uses shared SRAM mailbox regions, eliminating external handshake glue logic. Technically, the dsPIC33CH architecture uses a Harvard-style bus with single-cycle MAC, hardware DO/REP loops, and zero-overhead looping, allowing deterministic execution of field-oriented control (FOC) algorithms within tight PWM cycle windows. The 100 MIPS main core can execute a complete FOC routine in under 5 microseconds, supporting field weakening, MTPA, and sensorless observer algorithms for high-speed PMSM and BLDC drives. Typical applications include high-performance motor control (PMSM, BLDC, AC induction, switched reluctance), digital power conversion (PFC, LLC, full-bridge, synchronous rectification), automotive sensor fusion, and functional-safety drives up to ASIL-B/SIL-2. The dual-core split lets the main core run the time-critical control loop while the slave core manages comms, housekeeping, or diagnostics. When designing with this device, plan pin allocation carefully - the 48-pin UQFN limits available I/O. The slave core has its own dedicated PGED/S1MCLRx programming/debug pins which may require pull-ups for reliable ICSP access. Use MPLAB XC-DSC compiler for both cores and configure inter-core mailboxes via SFRs. This page combines distributor pricing, pin-compatible dsPIC33CH family variants, and practical design notes not found in the datasheet alone.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP505-I/PT

DSPIC33CH256MP505-I/PT - 256KB Flash Dual-Core 100MHz DSC | Microchip

The Microchip DSPIC33CH256MP505-I/PT is a dual-core 16-bit Digital Signal Controller (DSC) in a 48-pin TQFP (7x7) package, integrating a high-performance 100 MIPS main dsPIC33C core alongside a 90 MIPS secondary dsPIC33C core on a single die. The device provides 256 KB of Flash program memory, 16 KB of SRAM on the main core, and 4 KB of dedicated data RAM on the slave core, enabling deterministic parallel control and DSP tasks. Maximum operating frequency reaches 100 MHz with an extended temperature range of -40C to +85C and supply voltage of 3.0V to 3.6V. A Digital Signal Controller (DSC) is a microcontroller architecture that combines a standard MCU control pipeline with a Digital Signal Processor (DSP) engine for high-speed arithmetic. Within the broader taxonomy, DSCs sit between microcontrollers (MCU) and microcontrollers-with-DSP, themselves a subcategory of 16-bit embedded controllers and ultimately embedded processors in the integrated circuits hierarchy. The dsPIC33CH family specifically targets motor control, digital power conversion, and safety-critical applications where deterministic closed-loop performance is mandatory. Key features include dual independent dsPIC cores, high-resolution PWM with 1 ns edge placement, integrated CAN Flexible Data-Rate (CAN FD), 12-bit ADC up to 3.5 Msps, multiple UART/SPI/I2C interfaces, and Functional Safety (FuSa) support for ASIL-B/SIL-2 applications. The slave core can execute user code independently, allowing the main core to focus on real-time DSP tasks while the slave handles housekeeping, communication stacks, or sensor sampling. The 48-pin TQFP (PT) package offers an industry-standard 7x7 mm footprint with 0.5 mm pitch, well-suited for hand-solderable prototyping and volume production. AEC-Q100 qualification is available on automotive-grade variants, and the device supports debug via standard ICSP/ICD interfaces for both cores simultaneously. Typical applications include field-oriented control (FOC) motor drives, digital totem-pole PFC power supplies, wireless battery management systems, servo drives, and functional safety PLCs. When designing, allocate pin mapping carefully between cores and consult the dual-core programming model documentation for inter-core mailbox and shared RAM usage.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP505T-I/PT

DSPIC33CH256MP505T-I/PT - Dual-Core 100MHz DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33CH256MP505T-I/PT is a high-performance 16-bit dual-core Digital Signal Controller (DSC) from the dsPIC33CH family, integrating 328KB of Flash and 32KB+16KB RAM in a 48-pin TQFP (7x7) package. The device combines a 100 MIPS master dsPIC33 core with a 90 MIPS slave core, both capable of executing DSP and control workloads at up to 200 MHz peripheral clock. What is a Digital Signal Controller (DSC)? A DSC is a hybrid microcontroller/DSP that combines a deterministic 16-bit MCU core with single-cycle DSP MAC hardware, enabling tight feedback loops for motor control, digital power, and advanced sensing. The dsPIC33CH family specifically uses a dual-core architecture: a high-performance master core for control and communication tasks, and a dedicated slave core for time-critical DSP operations such as sensorless motor commutation. Within the broader semiconductor taxonomy, the part sits at: DSC -> Digital Signal Controller -> Microcontroller -> Integrated Circuit -> Semiconductor. Key features include dual 16-bit dsPIC DSC cores (master at 100 MIPS, slave at 90 MIPS), 256KB program Flash (328KB total program/data), 32KB SRAM on master plus 16KB on slave, and an integrated high-resolution PWM module (250 ps resolution). The part also integrates CAN-FD, multiple UART/SPI/I2C peripherals, a 12-bit ADC with up to 3.5 MSPS, and supports Functional Safety (FuSa) features such as lock-step diagnostics and RAM BIST. Architecturally, the dual-core design allows independent firmware on each core, with shared peripherals arbitrated via an internal bus matrix. The slave core can run sensorless Field-Oriented Control (FOC) algorithms for a permanent-magnet motor while the master core runs the user interface and communication stack, dramatically reducing latency and jitter versus single-core architectures. Typical applications include high-performance field-oriented motor control (PMSM, BLDC, ACIM), digital power conversion (bridgeless PFC, LLC, phase-shifted full-bridge), advanced LED lighting drivers, and Functional Safety systems up to ASIL-B / SIL-2. The wide 3.0V-3.6V operating range and 48-pin compact TQFP footprint target cost-sensitive industrial embedded designs. When designing with this device, ensure that the master/slave inter-core communication via mailbox FIFOs is properly sized for your loop period - the slave core typically receives one or more PWM-cycle measurement buffers from the master and returns updated duty-cycle commands. Decoupling requires a 10uF bulk plus 100nF per VDD/AVDD pair, and traces to the high-resolution PWM outputs must be length-matched for sub-nanosecond skew. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet to help engineers evaluate the DSPIC33CH256MP505T-I/PT for next-generation motor control and digital power platforms.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP506-E/MR

DSPIC33CH256MP506-E/MR - Dual-Core 16-bit DSC, 256KB Flash | Microchip

The Microchip DSPIC33CH256MP506-E/MR is a dual-core 16-bit Digital Signal Controller (DSC) in the dsPIC33CH family, delivering 200 MIPS combined performance from a master core (100 MIPS) and slave core (90 MIPS) that share a 64-pin QFN (9x9 mm) package. The device integrates 256 KB of Flash program memory plus 32 KB of SRAM on the master core and 16 KB of dedicated slave-core SRAM, with a 200 MHz internal oscillator derived from an external crystal or system clock. A digital signal controller is a microcontroller architecture that combines a deterministic 16-bit MCU pipeline with single-cycle hardware MAC (multiply-accumulate) and DSP engines, allowing real-time control loops and signal-processing kernels to coexist on one chip. Within the broader taxonomy it sits between general-purpose microcontrollers (MCU) and full digital signal processors (DSP), and dsPIC33CH parts extend that into the dual-core domain where one core can run a motor-control loop while the other handles housekeeping or communication stacks. Key features include CAN FD, high-resolution PWM (typical for motor and digital power control), four DMA channels, multiple SPI/I2C/UART interfaces, and AEC-Q100 automotive qualification. The on-chip peripherals and dual-core partitioning enable developers to dedicate the slave core to time-critical PWM/CPU-bound tasks such as field-oriented control while the master runs communication, diagnostics, and the application stack. Architecturally, the two dsPIC cores operate independently yet interconnect via tightly-coupled mailbox registers and shared RAM, giving the design engineer predictable bandwidth without software arbitration. The 200 MHz max clock and single-cycle MAC make the device well-suited to high-switching-frequency digital power and advanced motor-control algorithms where instruction budget would otherwise starve an MCU. Typical applications include BLDC/PMSM motor drives, digital switch-mode power supplies, solar inverters, automotive sensor fusion, and industrial automation controllers. Industrial-grade -40C to +125C operating temperature and AEC-Q100 qualification extend use cases into chassis and under-hood environments. Designers should review the slave-core RAM partitioning (16 KB) early in firmware architecture planning, because mailbox and shared-memory layout between cores influences inter-core latency. Stack depth and interrupt priority also need separate configuration per core. This page consolidates distributor pricing, parametric drop-in alternatives, and engineering design notes that go beyond the manufacturer datasheet, so design teams can compare and qualify the DSPIC33CH256MP506-E/MR against competing dual-core DSCs without leaving the page.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP506-I/MR

DSPIC33CH256MP506-I/MR - Dual-Core DSC 256KB Flash | Microchip

The Microchip DSPIC33CH256MP506-I/MR is a high-performance 16-bit dual-core Digital Signal Controller (DSC) from the dsPIC33CH family with Functional Safety (FuSa) capability, integrating 328 kB of Flash program memory and 64 kB of RAM in a 64-pin QFN (9x9 mm) package. The primary core runs at 200 MHz (100 MIPS) while the secondary core runs at 180 MHz (90 MIPS), enabling partitioned real-time control with deterministic inter-core communication. The device operates from a 3.0 V to 3.6 V supply and integrates advanced peripherals including high-resolution PWM, multiple CAN FD controllers, I2S, SPI, I2C, and 12-bit ADCs. A Digital Signal Controller (DSC) combines a microcontroller's deterministic interrupt handling with a DSP's computational throughput for closed-loop control applications. In the dsPIC33CH family, Microchip pioneered a true dual-core architecture where the secondary (slave) core can offload time-critical DSP tasks (sensorless FOC, digital filtering, power conversion math) from the primary (master) core which runs the application state machine and communication stacks. This partitioning delivers higher system bandwidth than single-core DSCs at the same clock rate. Key features include dual dsPIC DSC cores with independent peripherals, hardware safety features for ISO 26262 functional safety integration, four 12-bit ADC modules with up to 3.5 MSPS sampling rate, dedicated High-Resolution PWM (250 ps resolution) for precision motor and digital power control, and CAN FD interfaces supporting automotive bit rates. The 64-pin QFN package (MR suffix) provides a compact 9x9 mm footprint suitable for space-constrained power-conversion and motor-drive designs. Typical applications span sensorless field-oriented control (FOC) of PMSM, BLDC, and AC induction motors, digital switch-mode power supplies (SMPS) with PFC, photovoltaic micro-inverters, automotive body and chassis ECUs, and industrial drives up to several kW. The dual-core architecture reduces firmware complexity in safety-critical designs by isolating diagnostic and supervision tasks on the secondary core. Designers should provide 100 nF decoupling at every VDD/VSS pair, route the two cores' PGECx/PGEDx programming pairs to a dedicated header, and verify the high-resolution PWM load to ground (PGx) routing minimises switching noise coupling into the ADC analog inputs. Always consult the manufacturer datasheet for full register definitions and electrical characteristics before committing to layout. This page synthesizes distributor pricing, drop-in alternatives drawn from the same dsPIC33CH family, and practical design notes beyond what the manufacturer datasheet provides as a single document.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP506T-I/MR

DSPIC33CH256MP506T-I/MR - Dual-Core 100MHz DSC, 256KB Flash, 64-QFN | Microchip

The Microchip Technology DSPIC33CH256MP506T-I/MR is a 16-bit dual-core Digital Signal Controller (DSC) from the dsPIC33CH family, operating at up to 200MHz (180MHz master + 100MHz slave core), with 328KB Flash and 64-QFN (9x9 mm) package. It is purpose-built for high-performance, precision motor control and digital power conversion applications where deterministic control loops and high-resolution PWM are required. The device supports Functional Safety (FuSa) features and includes CAN-FD communication, enabling robust automotive and industrial designs. A Digital Signal Controller (DSC) is a hybrid device that combines the interrupt-driven control strengths of a microcontroller (MCU) with the deterministic numerical processing power of a Digital Signal Processor (DSP). Within the broader semiconductor taxonomy, the DSC sits between microcontrollers (general-purpose control) and DSPs (math-heavy signal processing), and the dsPIC33CH family belongs to the larger 16-bit dsPIC33 lineage, designed for real-time mixed-signal embedded systems. The dual-core architecture is the distinguishing innovation: the master core runs the application and control loop, while the slave core offloads latency-critical DSP tasks such as field-oriented control (FOC) math, peak current-mode control, or audio processing. Key features include 328KB (328k x 8) of Flash program memory, dual dsPIC DSC cores (one 90 MIPS, one 100 MIPS), integrated high-resolution PWM modules, multiple CAN-FD controllers, and Functional Safety hardware that simplifies IEC 61508 SIL 2/3 and ISO 26262 ASIL-B system designs. Operating from 3.0V to 3.6V across -40C to +85C industrial temperature range, the device targets harsh embedded environments with deterministic interrupt response. The exposed-pad 64-QFN (9x9 mm) package supports efficient thermal dissipation for the high MIPS throughput. Typical applications include sensorless and sensored brushless DC (BLDC) motor drives, automotive traction inverters, digital power supplies with peak current-mode control, and high-performance digital audio processing. The slave-core architecture allows partitioning of code between application logic and DSP routines, accelerating time-to-market for complex control firmware. When designing with this part, allocate the master core to system scheduling and communication, and reserve the slave core for the time-critical inner control loop, which minimizes jitter and improves control bandwidth.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP506T-I/PT

DSPIC33CH256MP506T-I/PT - 100MHz Dual-Core DSC, 256KB Flash | Microchip

The Microchip DSPIC33CH256MP506T-I/PT is a dual-core 16-bit Digital Signal Controller (DSC) from the dsPIC33CH family, integrating a 100 MHz main core and a 100 MHz slave core in a single 64-pin TQFP (10x10 mm) package with 256 KB of Flash, 32 KB SRAM, and 16 KB PRAM. The device supports 180 MHz / 200 MHz operation modes for advanced signal processing and is qualified for functional safety (FuSa) applications. A Digital Signal Controller (DSC) is a hybrid MCU-DSP device that combines a microcontroller's deterministic control peripherals with a digital signal processor's multiply-accumulate (MAC) engine. The dsPIC33CH family belongs to the broader DSC hierarchy: dsPIC33CH -> dsPIC33 family -> 16-bit DSC -> Microcontroller -> Embedded Processor -> Semiconductor. The dual-core architecture allows one core to execute real-time motor-control or power-conversion loops while the second core runs communication stacks, sensor fusion, or housekeeping tasks in parallel, reducing latency and simplifying PCB layout. Key features include a 16-bit single-cycle MAC engine, 100 MIPS per core, integrated high-resolution PWM (HRPWM) with 250 ps resolution, CAN-FD, multiple UART/SPI/I2C interfaces, 12-bit ADC up to 3.5 Msps, and 24-bit instruction word with 16-bit data path. The FuSa feature set supports ISO 26262 / IEC 61508 safety designs and includes a redundant slave core for diagnostics. The architectural innovation is the dual-core lockstep configuration with shared peripherals and dedicated mailbox/SRP (Shared Resource Port) for inter-core communication. Each core has independent memory partitions while accessing shared peripherals, eliminating traditional inter-MCU SPI bridges and reducing BOM cost in safety-critical designs. Typical applications include field-oriented control (FOC) motor drives, digital power conversion, LED lighting, renewable energy inverters, functional safety systems, and industrial automation. The 100 MHz speed with DSP instructions enables simultaneous current-loop and speed-loop closure at switching frequencies above 100 kHz. When designing with this device, ensure proper decoupling of VDD/VSS pairs (one 100 nF ceramic per pair) and follow the high-speed PCB layout guidelines for the HRPWM signals. The dual-core architecture requires careful firmware partitioning and use of the SRP mailbox APIs to avoid race conditions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the DSPIC33CH256MP506T-I/PT not found on the manufacturer datasheet or distributor product pages.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP508-E/PT

DSPIC33CH256MP508-E/PT - Dual-Core 16-bit DSC 100MHz 256KB Flash | Microchip

The Microchip DSPIC33CH256MP508-E/PT is a 16-bit dual-core Digital Signal Controller (DSC) from the dsPIC33CH family, featuring a primary core running at 100 MIPS and a secondary core at 100 MIPS for parallel processing. It integrates 256 KB of Flash program memory, 328 KB total memory addressing, 32 KB of RAM, 80 KB PRAM, and is housed in an 80-pin TQFP package (12x12 mm). The device supports operating voltages from 3.0V to 3.6V and the automotive -40C to +125C temperature range. A Digital Signal Controller (DSC) is a hybrid microcontroller that combines a 16-bit MCU core with integrated DSP engine, on-chip high-resolution PWM, and enhanced peripherals. The dsPIC33CH family uniquely introduces a dual-core architecture that allows one core (master) to manage the application code while the secondary core (slave) handles time-critical control loops, offloading tasks like motor control algorithms, digital power conversion, or sensor fusion. This partitioning enables higher system performance and deterministic real-time response. Key features of the DSPIC33CH256MP508-E/PT include dual 16-bit dsPIC33 DSC cores, high-resolution PWM (typically 250 ps resolution) suitable for digital power and motor control, CAN FD interface for automotive networking, multiple UART/SPI/I2C peripherals, 8 DMA channels, 5 timers, and 2 serial I/O interfaces. The integrated DSP engine enables single-cycle MAC operations and saturating arithmetic for efficient control-loop computation. Typical applications include high-performance precision motor control (BLDC, PMSM, AC induction), digital power conversion (LLC, PFC, full-bridge converters), advanced sensor fusion and predictive maintenance, automotive body and chassis ECUs, and industrial automation drives. The dual-core architecture is particularly advantageous for functional safety systems where one core monitors the other. When designing with this device, ensure proper decoupling (100 nF + 10 uF near each VDD pin) and follow Microchip's layout guidelines for the high-resolution PWM outputs. The slave core can be configured for live update from the master core, enabling field firmware updates without halting real-time control. Developers should use MPLAB X IDE with the XC-DSC compiler to take full advantage of the dual-core programming model.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP508-I/PT

DSPIC33CH256MP508-I/PT - Dual-Core 100MHz DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33CH256MP508-I/PT is a dual-core 16-bit Digital Signal Controller (DSC) combining a 100 MIPS main dsPIC core and a 90 MIPS slave dsPIC core in a single 80-pin TQFP (PT) package. The device integrates 256 KB of Flash program memory, 32 KB of SRAM, and high-resolution PWM peripherals, making it suitable for advanced motor control, digital power conversion, and functional-safety applications. A Digital Signal Controller (DSC) is a hybrid architecture that merges the deterministic real-time control attributes of a microcontroller (MCU) with the computational throughput of a Digital Signal Processor (DSP). Within the broader taxonomy, this part sits at the hierarchy: dsPIC33CH DSC -> DSC -> MCU/DSP hybrid -> microcontroller family -> semiconductor. The dual-core dsPIC33CH architecture enables designers to separate time-critical control loops (main core) from housekeeping, communications, and safety monitoring tasks (slave core), a key advantage over single-core dsPIC33CK/CJ devices. Key features include 100 MHz main core operation (200 MIPS with dual-issue DSP), a 12-bit ADC with up to 3.5 MSPS throughput, 8 DMA channels, multiple communication interfaces (CAN-FD, I2C, SPI, UART), and high-resolution PWM outputs with 250 ps resolution. The integrated op-amps and comparators support advanced analog front-ends for field-oriented control (FOC) of BLDC, PMSM, and ACIM motors. Functional-safety features targeting IEC 61508 and ISO 26262 are built into the silicon. The main core typically runs the high-speed motor-control or digital-power loop, while the slave core manages communication stacks (CAN-FD, UART), housekeeping, or secondary control loops. The inter-core peripheral sharing mechanism allows the slave to access main-core peripherals and vice versa via a dedicated mailbox and shared RAM, eliminating the need for an external companion MCU in many functional-safety designs. The 80-pin TQFP (12x12 mm) package provides 69 usable I/O pins for extensive peripheral routing. Typical applications include high-performance BLDC/PMSM motor drives (e.g., e-bikes, drones, appliances), digital switch-mode power supplies, photovoltaic inverters, and industrial servo drives. Designers can also leverage the device in safety-critical systems that benefit from the dual-core lockstep-style architecture. The CAN-FD peripheral suits automotive and industrial networking, and the high-resolution PWM supports silicon-carbide (SiC) and gallium-nitride (GaN) power-converter gate drive. When designing with the DSPIC33CH256MP508-I/PT, allocate the main-core interrupt budget to the control loop and ensure the slave-core mailbox response time is bounded to avoid blocking main-core reads. Decoupling VDD/VBAT with 100 nF + 10 uF ceramic capacitors as close as practical to the pins is recommended. The /PT TQFP package supports hand-solderable debug but for high-volume assembly a 4-layer PCB with thermal vias under the exposed pad is preferred. This page synthesizes distributor pricing, drop-in alternatives, and practical design considerations for the DSPIC33CH256MP508-I/PT, supplementing the manufacturer datasheet with curated selection guidance.

طلب عرض سعر اتصل بنا

DSPIC33CH256MP508T-I/PT

DSPIC33CH256MP508T-I/PT - 100MHz Dual-Core DSC, 256KB Flash | Microchip

The Microchip DSPIC33CH256MP508T-I/PT is a 16-bit dual-core Digital Signal Controller (DSC) with 256 KB Flash, 32 KB RAM, integrated DSP, high-resolution PWM, and CAN-FD, in an 80-pin TQFP (12x12 mm) package with tape-and-reel delivery. The device pairs a 100 MIPS main core with a 90 MIPS slave core for task partitioning, a hallmark of the dsPIC33CH family aimed at high-performance precision motor control and digital power conversion. A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP). The MCU provides deterministic control loops and rich peripherals, while DSP extensions add single-cycle MAC, barrel shifter, and saturating arithmetic for fast fixed-point control loops. In the dsPIC33CH family, the main core handles application code while the slave core offloads latency-critical or proprietary IP tasks (such as motor commutation, custom DSP algorithms, or housekeeping firmware), communicating through shared memory and mailbox interrupts. As a member of the broader dsPIC33 family of DSCs, which sits in the microcontroller hierarchy, the 'CH' series specifically addresses dual-core partitioning and functional safety (FuSa) applications. Key features include up to 200 MHz operation with a 16-bit data path, 256 KB Flash program memory, 32 KB SRAM with up to 16 KB additional PRAM accessible to the slave core, integrated high-resolution PWM, dual 12-bit ADC modules (or 12-bit ADC plus 12-bit DAC on certain variants), CAN-FD peripherals for automotive networking, and a peripheral trigger generator for deterministic event-driven control. The 'I' suffix denotes an industrial -40C to +85C operating temperature range, and 'PT' indicates the TQFP-80 package. The dual-core architecture is engineered to remove the software bottleneck common in single-core MCUs running both commutation and application code. The slave core can run proprietary field-oriented control (FOC) or housekeeping tasks independently, while the main core manages communication, user interface, and supervisory logic. The high-resolution PWM (1.04 ns edge resolution) eliminates the need for many external gate-driver delays in digital power applications. Typical applications include precision motor control (PMSM, BLDC, AC induction, and stepper drives), digital power conversion (telecom rectifiers, server PSUs, solar inverters), automotive body and powertrain ECUs, and industrial sensor/servo control. Functional-safety (FuSa) variants support ASIL-B/SIL-2 systems. When designing with the 80-pin TQFP, allocate the four ADC pins per converter to adjacent MCU pins for clean differential layout, and place decoupling capacitors within 2 mm of each VDD/VSS pair. The slave core requires its own PRAM boot configuration; refer to Microchip's code examples for mailbox-based inter-core signaling.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP205-E/M4

DSPIC33CH512MP205-E/M4 - Dual-Core dsPIC33CH, 512KB Flash | Microchip

The Microchip DSPIC33CH512MP205-E/M4 is a 16-bit dual-core digital signal controller (DSC) from the dsPIC33CH family, delivering up to 200 MHz on the master core and 180 MHz on the slave core in a 48-pin UQFN (6x6) package with exposed pad. The device integrates 512 KB Flash, 48 KB RAM on the master core and 16 KB RAM on the slave core, plus PRAM, and is qualified to the AEC-Q100 automotive standard with an extended -40C to +125C (E-temp) operating range. A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP). It combines deterministic interrupt-driven control logic with high-throughput DSP engines (single-cycle MAC, barrel shifter, zero-overhead looping). The dsPIC33CH family is a hierarchical superset: dsPIC33CH -> dsPIC33 -> 16-bit DSC -> MCU+DSP hybrid -> embedded processing core -> semiconductor. The dual-core architecture enables parallel execution of control and DSP tasks, eliminating the throughput bottlenecks of single-core designs in motor control and digital power conversion. Key features include dual dsPIC DSC cores with independent peripherals, 31x12-bit ADC and 4x12-bit DAC converters, high-resolution PWM (1 ns edge placement) suitable for precision motor control and digital power, plus CAN FD, I2C, SPI, UART/USART, IrDA and LINbus connectivity. Functional Safety (FuSa) features are integrated, supporting ISO 26262 system-level designs. The architecture uses a separate slave core to offload DSP tasks such as sensorless motor control algorithms, power factor correction, or digital power loops, while the master core runs the application layer and communication stacks. Independent peripheral sets on each core allow parallel deterministic execution without resource contention. Typical applications include automotive motor control (BLDC, PMSM, ACIM), digital power conversion (PFC, LLC, full-bridge), automotive sensor fusion, functional safety systems, and industrial servo drives. The 48-pin UQFN package is footprint-compatible with the dsPIC33CH256MP205 and dsPIC33CH128MP205 family members, simplifying PCB reuse across product variants. When designing with this part, note that the dual-core configuration requires a slightly different programming model: each core runs its own firmware image, and inter-core communication uses a dedicated mailbox register set. The exposed thermal pad on the UQFN package must be soldered to the PCB ground plane for proper thermal and electrical performance. This page synthesizes distributor pricing, AEC-Q100-qualified same-brand drop-in alternatives, and practical dual-core design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP205-E/PT

DSPIC33CH512MP205-E/PT - 100MHz Dual-Core DSC, 512KB Flash | Microchip

The Microchip DSPIC33CH512MP205-E/PT is a 16-bit dual-core Digital Signal Controller (DSC) from the dsPIC33CH family, integrating a 90 MIPS master core and a 100 MIPS slave core on a single die for high-performance, real-time control and DSP workloads. It ships in a 48-pin TQFP (7x7) package with 584 kB of Flash, 48 kB + 16 kB RAM, and runs up to 200 MHz on the dual-core complex while targeting high-resolution PWM and CAN Flexible Data-rate (CAN FD) applications. The 'E' suffix denotes an extended -40C to +125C industrial temperature grade, and the '/PT' suffix identifies the TQFP-48 package. A Digital Signal Controller is a hybrid architecture that fuses a microcontroller's deterministic, interrupt-driven control logic with a DSP's MAC-unit-rich arithmetic pipeline. In the dsPIC33CH family this is taken further with two independent cores that communicate through a tightly-coupled mailbox RAM and shared peripherals, allowing one core to execute a fast control loop (FOC motor commutation, for example) while the other runs application code, communication stacks, or housekeeping tasks in parallel. Key features include integrated high-resolution PWM (typically 250 ps step), four DMA channels, multiple UART/SPI/I2C interfaces, CAN FD, an on-chip 12-bit ADC, and functional safety (FuSa) hardware that simplifies IEC 60730 / Class B compliance for home appliances and industrial drives. The slave core can be field-updated independently of the master, enabling secure in-application firmware updates without halting the control loop. Typical applications include field-oriented control (FOC) of PMSM and BLDC motors, digital power conversion (PFC, LLC, full-bridge converters with high-resolution PWM), sensorless motor control, automotive body and pump controllers, functional-safety appliances, and industrial drives requiring deterministic dual-core partitioning. The dual-core topology halves latency for critical loops and allows system-level safety isolation between cores. When designing with this device, partition the firmware clearly between master (control) and slave (application or housekeeping) cores to fully exploit the dual-core architecture. Use Microchip's MPLAB X IDE with the XC-DSC compiler and dsPIC33CH SDK to configure inter-core mailboxes, DMA, and high-resolution PWM. Decouple AVDD/AVSS+AVDD/AVSS- ADC rails with 100 nF and 10 uF ceramic capacitors placed within 5 mm of the pins for clean converter sampling. This page synthesizes distributor pricing, parametric cross-references, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP205-I/M4

DSPIC33CH512MP205-I/M4 - 100MHz Dual-Core 512KB Flash DSC | Microchip

The Microchip DSPIC33CH512MP205-I/M4 is a 16-bit dual-core Digital Signal Controller (DSC) operating at up to 100 MHz, packaged in a 48-pin UQFN (M4) 6x6 mm housing with 512 KB of Flash program memory and 49 KB RAM. It integrates two independent dsPIC DSC cores (a 100 MIPS primary core and a 90 MIPS secondary slave core) on a single die, allowing the designer to separate real-time control tasks from housekeeping code in hardware. A Digital Signal Controller is a hybrid device that combines the deterministic interrupt response and bit-manipulation capabilities of a microcontroller with the computational throughput of a DSP engine. It belongs to the broader category of embedded processors (microcontroller -> 16-bit MCU -> DSC -> embedded processor) and is engineered specifically for high-performance motor control, digital power conversion, and other time-critical closed-loop applications where both DSP math and MCU-level peripherals are required on one chip. Key features highlighted by the manufacturer include high-resolution PWM (typically 250 ps resolution), a 12-bit ADC with up to 3.5 MSPS conversion rate, four DAC outputs, four op-amps/comparators on-chip, and CAN FD support. The dual-core architecture lets the secondary core offload tasks such as housekeeping communication, sensor decoding, or housekeeping state machines, while the primary core runs the control loop. This separation reduces code complexity and improves determinism versus single-core systems. Architecturally, the device uses a modified Harvard architecture with separate program and data buses and a single-cycle hardware multiplier/accumulator. Process technology is CMOS, and the device supports an industrial temperature range of -40 °C to +85 °C in this -I (industrial) grade variant. Per the manufacturer product page the family targets precision motor control, digital power, and functional-safety-capable systems. Typical applications include field-oriented control (FOC) of PMSM/BLDC motors, on-board EV chargers, telecom rectifier modules, server/AI power-supply digital control, LED drivers, and industrial inverters. Choose this part when you need dual-core isolation without adding a second MCU to the BOM. Design consideration: the dual-core architecture exposes inter-processor communication (IPC) primitives through shared memory and mailbox registers - allocate dedicated flash regions per core in the project linker script to avoid memory-map conflicts. Layout attention to the exposed pad (EP) of the UQFN is mandatory for thermal dissipation in motor-drive stages. This page synthesizes current distributor stock, dual-core DSC family positioning, and design notes that go beyond the manufacturer datasheet to help engineers evaluate this dual-core part against single-core MCUs.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP205-I/PT

DSPIC33CH512MP205-I/PT - Dual-Core DSC, 100 MIPS, 512KB Flash | Microchip

The Microchip Technology DSPIC33CH512MP205-I/PT is a high-performance dual-core 16-bit Digital Signal Controller (DSC) from the dsPIC33CH family, delivering 90 MIPS on the master core and 100 MIPS on the slave core for a combined throughput up to 200 MIPS. It integrates 512 KB of Flash program memory and 73 KB of SRAM in a 48-pin TQFP (7x7 mm) package with an operating voltage range of 3.0V to 3.6V and an industrial temperature range of -40C to +85C. A Digital Signal Controller is a hybrid MCU+DSP class device that combines a deterministic microcontroller core with a single-cycle MAC DSP engine, enabling tightly-coupled control loops and high-rate signal processing on a single chip. The dsPIC33CH family escalates this concept with a heterogeneous dual-core architecture where the slave core offloads time-critical DSP, math, and peripheral management while the master core handles application logic, communication stacks, and housekeeping — a pattern that replaces external companion DSP chips in cost-sensitive motor control and digital power designs. Key features include dual dsPIC DSC cores with independent DSP engines, integrated High-Resolution PWM (HRPWM) with 250 ps resolution, multiple CAN FD interfaces, 12-bit ADC modules at up to 3.5 Msps, and configurable logic cells for hardware event sequencing. The 512 KB Flash supports live update of the slave core code from the master, enabling in-field firmware partitioning and secure code isolation between cores. Typical applications include high-performance motor control (PMSM, BLDC, ACIM), digital power conversion (totem-pole PFC, LLC, phase-shifted full-bridge), industrial servo drives, EV traction inverters, and high-density LED lighting drivers. The dual-core split lets the slave run a 100 kHz control loop while the master manages Ethernet, UART diagnostics, and HMI updates without task-jitter. According to the manufacturer datasheet, AEC-Q100 Grade 1 qualified variants (DSPIC33CH512MP505 family) extend operation to +150C junction for automotive under-hood applications. When designing with this device, partition DSP-heavy work onto the slave core early in the firmware architecture and reserve the master for communication, state machines, and supervisory logic. Use the on-chip High-Resolution PWM with the dedicated 16-bit timer base to keep switching edge jitter below 2 ns in digital-power feedback loops. For motor control, leverage the integrated op-amps and 12-bit ADC for current sensing without external analog front-end ICs.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP205T-I/M4

DSPIC33CH512MP205T-I/M4 - dsPIC33CH Dual-Core DSC, 100MHz, 512KB | Microchip

The Microchip DSPIC33CH512MP205T-I/M4 is a 16-bit dual-core Digital Signal Controller (DSC) from the dsPIC33CH family, operating at up to 200 MHz with 100 MIPS per core and housed in a 48-pin UQFN (6x6 mm) package. The device integrates 584 KB of Flash program memory and dual-core PRAM (48 KB master + 16 KB slave), targeting high-performance, precision closed-loop motor control and digital power conversion. A Digital Signal Controller (DSC) is a hybrid MCU/DSP architecture that combines a microcontroller's deterministic peripheral control with a digital signal processor's math throughput. Within the Microchip taxonomy, dsPIC33CH sits between dsPIC33CK (single-core high-performance) and dsPIC33EP (general-purpose DSC), and below TMS320 families from TI in pure DSP throughput. The CH family specifically enables a master-slave dual-core design where the slave handles time-critical control loops while the master manages communications, housekeeping, and application logic - reducing interrupt latency and jitter in hard real-time systems. Key features of the DSPIC33CH512MP205T-I/M4 include Functional Safety (FuSa) hardware support, dual 16-bit dsPIC DSC cores (master + slave), integrated DSP engine with MAC operations, advanced motor-control PWMs, high-speed 12-bit ADCs, and a rich set of communication peripherals (CAN-FD, I2C, SPI, UART). The -40C to +85C industrial temperature grade supports factory-floor deployment. The "T" suffix indicates Tape & Reel packaging. The dual-core architecture allows the slave core to execute the high-speed control loop (FOC for motors or current-mode control for power supplies) deterministically, while the master core handles Modbus/CAN communication stacks, system diagnostics, and FuSa monitoring. This decouples control-bandwidth requirements from application-layer workloads - a key advantage over single-core MCUs in latency-sensitive systems. Typical applications include field-oriented control (FOC) of PMSM/BLDC motors, on-board EV chargers, server fans, industrial pumps, digital PFC/total-harmonic stages, and functional-safety-critical appliances. When designing with this device, reserve the slave core exclusively for hard real-time loops and dedicate the master to communications and supervisory tasks to fully exploit the deterministic architecture.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP205T-I/PT

DSPIC33CH512MP205T-I/PT - Dual-Core DSC 512KB Flash TQFP-48 | Microchip

The Microchip DSPIC33CH512MP205T-I/PT is a 16-bit dual-core Digital Signal Controller (DSC) featuring a master core running at 200 MHz / 100 MIPS and a slave core at 180 MHz / 90 MIPS, integrated in a 48-pin TQFP (7x7 mm) package. It combines 512 KB of program Flash with 48 KB of RAM and an additional 4 KB PRAM for slave-core messaging, delivering up to 584 kB total addressable memory for high-performance digital signal processing applications. A DSC (Digital Signal Controller) is a hybrid device that merges the deterministic real-time control of a microcontroller with the computational throughput of a Digital Signal Processor (DSP). In the broader taxonomy, a DSC sits between an MCU and a DSP, supporting single-cycle MAC instructions and saturating arithmetic, while retaining on-chip peripherals such as ADCs, PWMs, and communication interfaces. The dsPIC33CH sub-family further extends this concept by integrating two cores on one die - allowing concurrent closed-loop control and high-level supervisory tasks within a single chip. Key features of this device include dual independent cores with separate debugging ports, 12-bit ADC with up to 3.5 MSPS throughput, high-resolution PWM with 250 ps resolution for precision power conversion, CAN FD and multiple UART/SPI/I2C interfaces, and Functional Safety (FuSa) features for IEC 60730-class applications. The 48-pin TQFP package supports an industrial operating temperature range of -40C to +85C and is powered from 3.0 V to 3.6 V. The architecture combines a 16-bit modified Harvard bus with DSP-specific accumulators and barrel shifters, achieving deterministic interrupt latency under 10 cycles. The master core handles communications and main control loops, while the slave core can execute time-critical DSP tasks such as field-oriented motor control or digital power conversion without contending with system software. This partitioning shortens firmware development cycles and enables modular certification strategies for safety-critical designs. Typical applications include field-oriented control (FOC) motor drives, digital switched-mode power supplies, solar inverters, EV chargers, and industrial PLCs. The wide peripheral integration reduces external component count, making it a strong fit for compact motor-control and power-conversion boards where PCB area is at a premium. When designing with this device, ensure that the master and slave core debug headers are correctly assigned and that the dedicated VDD/VSS pins for each ADC are properly decoupled. A 100 nF plus 10 uF capacitor stack placed within 5 mm of the AVDD pins is required to meet ADC SNR specifications. This page synthesizes distributor pricing, drop-in same-family alternatives, parametric comparisons, and practical decoupling/thermal design notes not found in the manufacturer datasheet, giving engineers a single decision-ready view of the DSPIC33CH512MP205T-I/PT for control and DSP applications.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP206-E/MR

DSPIC33CH512MP206-E/MR - Dual-Core DSC, 512KB Flash | Microchip

The Microchip DSPIC33CH512MP206-E/MR is a high-performance dual-core 16-bit Digital Signal Controller (DSC) from the dsPIC33CH family, integrating a 90 MIPS master core and a 100 MIPS slave core in a single 64-pin QFN (9x9 mm) package with exposed thermal pad. The device pairs 512 KB of Flash program memory with 64 KB of PRAM and 16 KB RAM, and runs at up to 200 MHz on the slave core while the master executes at 180 MHz, enabling deterministic time-critical peripheral control alongside DSP signal processing. A Digital Signal Controller is a hybrid microcontroller/DSP class device — in taxonomy it sits between a microcontroller (MCU) and a digital signal processor (DSP), combining deterministic interrupt-driven control loops with hardware multiplier/accumulator-based signal processing. The dsPIC33CH sub-family extends this with a dual-core architecture that physically separates the application control plane (master) from the time-critical peripheral control plane (slave), giving embedded designers the benefits of two processors in one die without an external interconnect. Key features include up to 8 DMA channels, high-resolution PWM (1 ns duty-cycle resolution when paired with the on-chip DAC), up to four 16-bit/24-bit timer/counters, four UART, three SPI, two I2C, and two CAN FD peripherals. Functional-safety (FuSa) diagnostic libraries, ECC on Flash and RAM, and a dedicated slave debugging port are also integrated. The AEC-Q100 grade-1 qualified variant operates from −40 °C to +125 °C. Architecturally, the slave core owns the high-resolution PWM, ADCs and time-critical peripherals, offloading torque-loop or power-loop control in motor-control and digital-power applications; the master core runs the application state machine and communications stacks. The two cores communicate over a mailbox register scheme with deterministic latency. Typical applications include sensorless field-oriented control (FOC) motor drives, on-board EV chargers and DC/DC converters, photovoltaic micro-inverters, audio Class-D amplifiers, and industrial drives requiring functional-safety diagnostics. The wide 3.0 V–3.6 V supply and 64-pin QFN footprint also suit compact high-density power modules. Designers should allocate a 4-layer PCB stack with the exposed pad soldered to a continuous ground copper pour — a properly stitched EP keeps junction temperature well below the 150 °C limit under full peripheral load. This page synthesizes distributor pricing, AEC-Q100 functional-safety trade-offs, and drop-in dsPIC33CH alternatives not found in the manufacturer datasheet, giving procurement and engineering teams a single decision-ready source.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP206-E/PT

DSPIC33CH512MP206-E/PT - Dual-Core 16-bit DSC, 512KB Flash | Microchip

The Microchip DSPIC33CH512MP206-E/PT is a dual-core 16-bit Digital Signal Controller (DSC) combining a 100 MIPS master dsPIC33 core with a 100 MIPS slave core in a single 64-pin TQFP (10x10 mm) package, qualified to the AEC-Q100 automotive standard and rated for -40C to +125C (E-temp) operation. The device integrates 512 KB of Flash program memory plus 48 KB + 16 KB of RAM, eight DMA channels, 16 timers, dedicated high-resolution PWM with up to 250 ps resolution, and a CAN Flexible Data-Rate (CAN FD) controller for high-bandwidth industrial networking. A Digital Signal Controller (DSC) is a hybrid of a microcontroller (MCU) and a Digital Signal Processor (DSP). In the dsPIC33CH hierarchy, dual-core DSCs sit above single-core DSCs and below high-end 32-bit microcontrollers, occupying a critical role in real-time control where deterministic DSP math and fast interrupt response must coexist with peripheral-rich control loops. Key features include dual dsPIC DSC cores running at up to 100 MIPS each (200 MHz), dedicated peripherals assigned independently to each core for true parallel execution, high-resolution PWM (250 ps) ideal for digital power conversion, and integrated CAN FD for high-throughput automotive/industrial communication. The architecture also includes a 12-bit ADC with up to 3.5 MSPS, multiple SPI/I2C/UART interfaces, and Functional Safety (FuSa) features tailored for ISO 26262-capable systems. The dsPIC33CH512MP206-E/PT targets applications where software partitioning between cores improves system safety and responsiveness, such as field-oriented motor control, digital switch-mode power supplies, and functional-safety-critical industrial drives. Typical applications include high-performance BLDC/PMSM motor control (appliance, EV traction auxiliary, industrial servo), digital power conversion (totem-pole PFC, LLC, full-bridge converters), and automotive sensor fusion with safety isolation between control and housekeeping tasks.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP206-I/MR

DSPIC33CH512MP206-I/MR - 100MHz Dual-Core 16-bit DSC, 512KB Flash | Microchip

The Microchip dsPIC33CH512MP206-I/MR is a dual-core 16-bit Digital Signal Controller (DSC) operating at up to 100 MHz (200 MIPS primary, 180 MIPS secondary) in a 64-pin QFN (9x9 mm) package with exposed pad. It integrates 512 KB of Flash program memory, 64 KB RAM, and dedicated high-performance peripherals designed for precision closed-loop control. What is a DSC? A Digital Signal Controller (DSC) is a hybrid MCU-DSP architecture that combines a microcontroller's deterministic control peripherals (timers, PWMs, ADCs, digital I/O) with a Digital Signal Processor (DSP) core for high-throughput math. The dsPIC33CH family extends this with a heterogeneous dual-core topology: a master core handles control and communications while a slave core offloads time-critical DSP tasks, mirroring a hypernym hierarchy of DSC -> MCU -> microcontroller -> embedded processor -> semiconductor. Key features of this device include dual independent dsPIC33 cores, high-resolution PWM (250 ps), twelve 16-bit ADCs with up to 3.5 MSps, four 12-bit DACs, four analog comparators with 32 ns propagation delay, CAN FD, three SPI/I2S, four UART, and a parallel master port (PMP). The on-chip op-amps and 5-bit DAC references are tuned for field-oriented control (FOC) loops in motor drives. Architecturally, the device separates the cores onto independent buses with shared memory mailbox for inter-core messaging. This deterministic inter-core communication eliminates the timing jitter of a software RTOS, while each core retains its own DSP engine, register set, and interrupt controller - critical for safety-certified motor control and digital power topologies. Typical applications include high-performance motor control (FOC / PFC), digital switch-mode power supplies (SMPS), wireless battery chargers, renewable energy inverters, and functional-safety (FuSa) industrial systems. The dual-core configuration also enables sensor-fusion and advanced lighting (DALI / DMX) systems where a slave core can run autonomous DSP while the master handles communication. Designers should note that the slave core adds latency on mailbox calls; distribute workload such that the master makes decisions and the slave executes deterministic inner loops. The QFN-9x9 footprint with EP requires thermal vias under the exposed pad - up to 2.7 W dissipation at 85 C is supported with proper PCB copper. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - a faster reading path for selection, sourcing, and PCB layout decisions on the dsPIC33CH dual-core family.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP206-I/PT

DSPIC33CH512MP206-I/PT - 100MHz Dual-Core DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33CH512MP206-I/PT is a 16-bit dual-core digital signal controller (DSC) that pairs a 100 MIPS main core with a 100 MIPS slave core on a single die, delivering up to 200 MIPS of aggregated DSP throughput. Housed in a 64-pin TQFP (10x10 mm) package, it integrates 512 KB of Flash program memory, 64 KB of SRAM, and high-resolution PWM peripherals targeted at precision motor control and digital power conversion. The two cores communicate through a dedicated mail-box / SFR inter-core link, enabling deterministic partitioning of control loops across the master and slave cores. A digital signal controller (DSC) is a hybrid MCU/DSP that combines the deterministic interrupt handling and peripheral set of a microcontroller with the single-cycle MAC and DSP engine of a digital signal processor. Within the broader hierarchy, the DSPIC33CH family sits above general-purpose 16-bit PIC MCUs and below 32-bit Cortex-M4F parts, targeting real-time control loops where cycle-accurate math and tight PWM timing are mandatory. Key differentiating specifications include: 100 MIPS per core at 3.0-3.6V operation, integrated high-resolution PWM with 250 ps edge placement, dual 12-bit ADC modules at 3.5 Msps each, CAN-FD, and 4 op-amps plus 4 comparators on-chip. The dual-core topology lets designers run a high-frequency current-control loop on the slave while the master handles communication stacks and state machines, reducing interrupt latency on the critical path. Typical applications span field-oriented control (FOC) of PMSM/BLDC motors, on-board EV chargers, photovoltaic micro-inverters, welding power supplies, and functional-safety industrial drives that benefit from the second core for diagnostic redundancy. The integrated op-amps simplify current-sense signal conditioning directly at the DSC pins. When designing with the DSPIC33CH512MP206-I/PT, allocate the time-critical loop to the slave core and reserve the master for housekeeping, leaving headroom for CAN-FD and EtherCAT-style communication stacks. Decouple AVDD and DVDD separately and use the on-chip op-amps for current sensing to minimize external analog components. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP208-E/PT

DSPIC33CH512MP208-E/PT - Dual-Core 100MHz DSC, 512KB Flash | Microchip

The Microchip DSPIC33CH512MP208-E/PT is a dual-core 16-bit Digital Signal Controller (DSC) delivering up to 100 MIPS on the master core and 90 MIPS on the slave core, packaged in an 80-pin TQFP (PT) with 0.50 mm pitch and a 12x12 mm body. It integrates 584 KB of Flash program memory (512 KB Instruction + 72 KB data Flash), 64 KB RAM, and high-resolution PWM with CAN Flexible Data-Rate (CAN FD) peripherals targeting precision motor control and digital power conversion. A Digital Signal Controller is a hybrid device that combines a microcontroller's deterministic interrupt-driven control with a Digital Signal Processor (DSP)'s single-cycle MAC engine. The dsPIC33CH family extends this further by placing two independent dsPIC cores on-chip: the master core manages application code, communication stacks, and the housekeeping peripheral set, while the slave core executes time-critical DSP loops such as field-oriented control (FOC) or power-conversion compensators, communicating with the master through deterministic dual-port RAM and shared mailbox FIFOs. This topology belongs to the broader hierarchy: DSC -> microcontroller -> embedded processor -> semiconductor IC. Key features include dual-core 16-bit architecture, 200 MHz master PLL clock with 180 MHz slave PLL, 16 high-resolution PWM channels with 250 ps resolution, four operational amplifiers and three 12-bit ADCs with up to 40 Msps combined throughput, plus CAN FD and high-speed comparators. Functional-safety features include a windowed watchdog, RAM built-in self-test (MBIST), and a dedicated slave core that can supervise the master, supporting IEC 60730 Class B and helping designers targeting ASIL-B / SIL-1 systems. Architecturally the device uses a Harvard bus with separate program and data paths, dual-issue DSP instructions, and a hardware divider to sustain real-time control loops. The high-resolution PWM (HRPWM) edge placement is generated by a micro-edge delay line, allowing switching frequencies in the multi-MHz range without losing duty-cycle precision - critical for totem-pole PFC, LLC converters, and high-FPM field-oriented motor drives. Typical applications include field-oriented motor control for industrial servo and traction drives, on-board EV charger and totem-pole PFC power supplies, solar inverters with MPPT, audio Class-D amplification, and functional-safety sub-systems. The dual-core split also suits dual-motor drone ESCs and precision robotics where one core drives the kinematics and the second core runs the per-axis current loop. When designing with this part, allocate the slave core exclusively to the deterministic control loop and let the master handle communication, sequencing, and housekeeping. Keep HRPWM analog ground returns short, decouple VDD/VSS close to the package with 100 nF + 1 µF pairs, and follow Microchip AN2721 and TB3138 for slave-core bring-up. This page synthesises distributor pricing, drop-in same-package alternatives, and practical dual-core design notes that go beyond the manufacturer datasheet itself.

طلب عرض سعر اتصل بنا

DSPIC33CH512MP208-I/PT

DSPIC33CH512MP208-I/PT - 100MHz Dual-Core DSC | Microchip

The Microchip DSPIC33CH512MP208-I/PT is a 16-bit dual-core Digital Signal Controller (DSC) operating at up to 100 MHz, housed in an 80-pin TQFP (PT) package. The device integrates a 90 MIPS master core and a 100 MIPS slave core, both dsPIC33 architecture, with 512 KB Flash program memory, 64 KB RAM, and 8 DMA channels for high-throughput control loops. What is a dual-core DSC? A Digital Signal Controller combines a microcontroller's deterministic control peripherals with a DSP's mathematical throughput on a single die. The dsPIC33CH family extends this concept by partitioning the workload: the master core runs the application, communication stacks, and supervisory tasks, while the slave core executes deterministic real-time loops (motor commutation, power conversion) with its own dedicated peripheral set. Compared with single-core DSCs, dual-core devices reduce interrupt latency, decouple firmware certification boundaries, and enable parallel development of safety-critical and application code. Key features include high-resolution 250 ps PWM with 8 independent outputs, CAN FD, three UART/SPI/I2C pairs per core, and 16 timers. The dual-core architecture supports Functional Safety (FuSa) partitioning where the slave core runs safety functions independently of the main application, and on-chip interconnect enables shared memory for inter-core messaging. Integrated op-amps, comparators, and 12-bit ADC with 40 Msps capability make it suited to high-bandwidth feedback systems. The device is fabricated on a CMOS process, supports operating temperatures from -40 C to +85 C (industrial grade -I), and is housed in a 12x12 mm TQFP-80 package with 0.50 mm pitch. Programming is supported through MPLAB X IDE, MPLAB XC-DSC compiler, and the dsPIC33CH Curiosity development board, with on-chip trace and dual trace/ICE debug paths. Typical applications include field-oriented control (FOC) of PMSM and BLDC motors, digital power conversion (PFC + LLC), advanced LED lighting with adaptive dimming, and industrial drives requiring functional safety. The slave core is well suited to running the safety routine independently while the master core handles the user interface. Designers should pay close attention to pin assignment when using both cores' peripherals, since most signals are multiplexed. Use the Microchip Motor Control Application Framework (MCAF) as a starting point to avoid race conditions in inter-core messaging via the MSI (Master-Slave Interface) shared RAM.

طلب عرض سعر اتصل بنا

الفئات الفرعية

المنتجات (39,000+)

DSPIC33CH256MP208-I/PT - Dual-Core 100MHz DSC, 256KB Flash | Microchip

DSPIC33CH256MP208T-I/PT - Dual-Core 100MHz DSC, 256KB Flash | Microchip

DSPIC33CH256MP505-E/M4 - Dual-Core 100MHz DSC, 256KB Flash | Microchip

DSPIC33CH256MP505-I/PT - 256KB Flash Dual-Core 100MHz DSC | Microchip

DSPIC33CH256MP505T-I/PT - Dual-Core 100MHz DSC, 256KB Flash | Microchip

DSPIC33CH256MP506-E/MR - Dual-Core 16-bit DSC, 256KB Flash | Microchip

DSPIC33CH256MP506-I/MR - Dual-Core DSC 256KB Flash | Microchip

DSPIC33CH256MP506T-I/MR - Dual-Core 100MHz DSC, 256KB Flash, 64-QFN | Microchip

DSPIC33CH256MP506T-I/PT - 100MHz Dual-Core DSC, 256KB Flash | Microchip

DSPIC33CH256MP508-E/PT - Dual-Core 16-bit DSC 100MHz 256KB Flash | Microchip

DSPIC33CH256MP508-I/PT - Dual-Core 100MHz DSC, 256KB Flash | Microchip

DSPIC33CH256MP508T-I/PT - 100MHz Dual-Core DSC, 256KB Flash | Microchip

DSPIC33CH512MP205-E/M4 - Dual-Core dsPIC33CH, 512KB Flash | Microchip

DSPIC33CH512MP205-E/PT - 100MHz Dual-Core DSC, 512KB Flash | Microchip

DSPIC33CH512MP205-I/M4 - 100MHz Dual-Core 512KB Flash DSC | Microchip

DSPIC33CH512MP205-I/PT - Dual-Core DSC, 100 MIPS, 512KB Flash | Microchip

DSPIC33CH512MP205T-I/M4 - dsPIC33CH Dual-Core DSC, 100MHz, 512KB | Microchip

DSPIC33CH512MP205T-I/PT - Dual-Core DSC 512KB Flash TQFP-48 | Microchip

DSPIC33CH512MP206-E/MR - Dual-Core DSC, 512KB Flash | Microchip

DSPIC33CH512MP206-E/PT - Dual-Core 16-bit DSC, 512KB Flash | Microchip

DSPIC33CH512MP206-I/MR - 100MHz Dual-Core 16-bit DSC, 512KB Flash | Microchip

DSPIC33CH512MP206-I/PT - 100MHz Dual-Core DSC, 512KB Flash | Microchip

DSPIC33CH512MP208-E/PT - Dual-Core 100MHz DSC, 512KB Flash | Microchip

DSPIC33CH512MP208-I/PT - 100MHz Dual-Core DSC | Microchip