المنتجات (46,000+)

ICL7117CPL+ - 3.5-Digit Dual-Slope ADC | Maxim Integrated
ICL7117CPL+

ICL7117CPL+ - 3.5-Digit Dual-Slope ADC | Maxim Integrated

The Maxim Integrated ICL7117CPL+ is a 3.5-digit, low-power, dual-slope analog-to-digital converter with integrated display drivers, a reference, a clock, and a display Hold function. The device is packaged in a 40-pin PDIP and directly drives an instrument-size LED display. Its integrating architecture and very high input impedance suit precision measurement systems that need stable digital readings from relatively high source impedance. An integrating ADC such as the ICL7117CPL+ converts an analog input voltage into a digital result through repeated integration and reference measurement. This dual-slope method is well suited to meters and panel instruments because it provides high input impedance, rejects periodic interference, and can use simple passive input networks. The ICL7117 family adds a Hold pin to the ICL7106 and ICL7107 function, allowing a measured value to remain displayed for examination or transfer to another system. The ICL7117CPL+ integrates a 3.5-digit A/D converter, seven-segment LED display drivers, an internal reference, and a clock. Those functions reduce the number of external components required for a standalone display instrument. The Hold function is particularly useful when an operator must freeze a reading during calibration, inspection, or process monitoring without interrupting the ongoing measurement. The dual-slope conversion method supports rejection of interference at the conversion frequency. Its high input impedance also reduces loading of the sensing circuit, which is important when the input originates from bridges, thermocouples, or other relatively high-impedance sources. The exact conversion timing, input limits, resolution detail, reference voltage, and operating-temperature limits must be selected from the manufacturer data sheet when defining a production design. Typical uses include digital panel meters, laboratory instrumentation, process monitoring, temperature measurement, laboratory scales, and general-purpose industrial measurement panels. The integrated LED drivers make the ICL7117CPL+ particularly appropriate for displays built from conventional seven-segment LED digits rather than multiplexed glass LCDs. An ICL7116CPL+ is the corresponding LCD-oriented family member, while the ICL7117CPL+ supports LED display systems. Designers should preserve the recommended input and reference network, bypass placement, and display-driver layout described by Maxim Integrated. Because this is a through-hole PDIP device in a 40-pin package, PCB allocation must reserve the full footprint and adequate insertion clearance. Power, ground, reference, analog input, timing, and display-driver connections should be assigned directly from the package pin-description table and datasheet application example. This page combines the device architecture, display-function selection, practical layout guidance, package information, and same-footprint replacement analysis. It is intended to help engineers determine whether the ICL7117CPL+ provides the required LED display drive and Hold behavior without adding a separate ADC, display driver, clock, and reference to a measurement instrument.

طلب عرض سعر اتصل بنا
ICL7117CQH - 3.5-Digit Dual-Slope ADC | Maxim Integrated
ICL7117CQH

ICL7117CQH - 3.5-Digit Dual-Slope ADC | Maxim Integrated

Maxim Integrated ICL7117CQH is a 3.5-digit monolithic dual-slope analog-to-digital converter with a parallel word output, built-in reference, bipolar input, and low-noise front end. It operates from a 6 V to 9 V supply in the commercial 0 °C to 70 °C temperature grade and is packaged in a 44-pin PLCC (QCCJ) surface-mount package. The converter is designed to directly drive seven-segment LED displays while providing a held digital measurement when the Hold function is asserted. An integrating analog-to-digital converter converts an unknown input voltage into elapsed time by charging and discharging an internal integration network. The ICL7117 belongs to the integrating ADC, dual-slope ADC, and precision measurement converter hierarchy. Unlike a successive-approximation ADC, a dual-slope converter rejects a substantial amount of periodic noise and is commonly used with panel meters, laboratory instruments, scales, and industrial measurement equipment. Principal characteristics include 3.5-digit measurement resolution, a reported 16-bit conversion word, single-channel operation, parallel word access, an integrated reference source, and support for bipolar input signals. The ICL7117 differs from the ICL7116 because it includes a Hold input and directly supports LED displays, whereas the ICL7116 is intended for LCD displays. This distinction makes pin and function compatibility with the ICL7116 unsuitable despite their shared converter heritage. The internal architecture combines a precision reference, comparator, integrator, timing section, digital counter, and display-driver outputs. Dual-slope conversion repeatedly measures input and reference intervals, producing a result that is effectively proportional to the ratio between the input voltage and the reference voltage. The reported 16-bit parallel output permits a host processor to capture the converted value without reproducing the internal counter timing, while the Hold input can freeze the displayed result during measurement or interface transactions. Typical uses include digital panel meters, laboratory measurement instruments, process-monitoring equipment, weighing systems, and embedded instrumentation with discrete LED displays. The 6 V to 9 V supply range suits systems that already provide a 9 V rail, while the commercial temperature grade targets indoor laboratory, industrial, and commercial equipment operating between 0 °C and 70 °C. Designers should pay particular attention to input polarity, reference accuracy, integration timing, display-driver compatibility, and the distinction between the Hold and Digit inputs. Confirm the complete QCCJ pin assignment and board footprint against the manufacturer data sheet before routing a replacement PCB or connecting LED segments. This product record combines the manufacturer's converter description with package, temperature, interface, and lifecycle information, then adds practical selection guidance and a package-focused comparison for engineers evaluating replacements without requiring a PCB change.

طلب عرض سعر اتصل بنا
ICL7126CPL+ - 3.5-Digit Dual-Slope ADC | Analog Devices
ICL7126CPL+

ICL7126CPL+ - 3.5-Digit Dual-Slope ADC | Analog Devices

The Analog Devices ICL7126CPL+ is a low-power 3.5-digit dual-slope analog-to-digital converter with a 3 conversions-per-second conversion rate, integrated seven-segment decoders and display drivers, a voltage reference, and a clock circuit in a 40-pin PDIP package. The converter combines a complete measurement signal chain on one CMOS IC and directly supports a non-multiplexed LCD display. An integrating ADC such as the ICL7126 converts an analog input into a time-proportional digital result by repeatedly integrating the input and measuring the interval required to return to zero. Within the broader semiconductor hierarchy, the ICL7126 is a dual-slope ADC, which is an ADC, which is a data-conversion IC within integrated circuits. This makes it suitable for compact panel-meter and laboratory instrumentation designs where the display driver functions are useful. The principal verified features include 3.5-digit measurement resolution, a 3-SPS conversion rate, low power operation, a 40-pin PDIP package, and integrated segment decoders and drivers. The integrated voltage reference and clock reduce the number of external support circuits needed for a basic digital panel meter. The device also contains the active components required to implement a complete measurement system rather than operating only as a numeric converter. The ICL7126 uses a dual-slope conversion method, integrating both the unknown input and a known reference during successive measurement intervals. Its architecture is intended for high-input-impedance measurement systems. According to the Analog Devices product page, the monolithic converter directly drives a non-multiplexed LCD, while the Renesas datasheet identifies the ICL7126 as a plug-in replacement for the ICL7106 when only passive components are changed. Typical uses include digital panel meters, laboratory meters, process monitoring equipment, temperature and pressure instrumentation, and other low-rate measurement systems with a three-digit display. The integrated display drivers are especially useful when the measured quantity must be presented locally without requiring a separate display controller, microprocessor, or complex display multiplexer. The principal design consideration is that the analog front end, reference network, timing components, and LCD interface must be evaluated together rather than as independent blocks. Grounding, input filtering, reference stability, LCD contrast, and conversion timing determine whether the complete meter achieves useful accuracy. Designers should follow the manufacturer application guidance and verify the exact electrical limits against the current datasheet before finalizing component values. This product page consolidates verified manufacturer information, distributor availability, package details, replacement guidance, and engineering-oriented application guidance. It also distinguishes the verified ICL7126 family information from replacement candidates whose individual electrical ratings still require engineering confirmation against the latest manufacturer datasheets.

طلب عرض سعر اتصل بنا
ICL7126CQH - 3.5-Digit LCD A/D Converter | Analog Devices
ICL7126CQH

ICL7126CQH - 3.5-Digit LCD A/D Converter | Analog Devices

Analog Devices ICL7126CQH is a low-power, 3.5-digit successive-approximation A/D converter designed for direct interface with liquid-crystal displays. The device provides seven-segment display decoding and display-driver functions in a 44-lead J-lead ceramic LCC package. It combines an A/D converter, internal reference, clock, seven-segment decoders, display drivers, and associated control functions on one CMOS integrated circuit. The ICL7126CQH belongs to the ADC/DAC category of signal-conversion semiconductors. An A/D converter, also called an analog-to-digital converter, transforms a continuously varying analog voltage into a numeric code suitable for measurement, display, control, or data acquisition. A 3.5-digit converter can resolve approximately 1999 principal counts and is commonly used for panel meters, laboratory instruments, industrial readouts, and portable measurement systems where more resolution than a simple three-digit display provides is useful. The manufacturer describes the ICL7126 family as a low-power device intended to drive liquid-crystal displays directly. Its integrated seven-segment decoders reduce the external logic required between the conversion result and the LCD. Direct LCD drive simplifies instrument construction by limiting the main external circuitry to the input network, timing components, display connections, and normal bypass or protection components described in the manufacturer data sheet. The ICL7126CQH is specified in the 44-LCC J-lead package and appears on the manufacturer's product page as a production product. Analog Devices also recommends the ICL7136 for new designs, which is an important lifecycle consideration when selecting between continued use of an established converter and migration to a newer family member. The exact electrical limits, conversion timing, input impedance, reference characteristics, display-drive specifications, and environmental ratings should be taken from the ICL7126 manufacturer data sheet before release of a production circuit. Common uses include digital panel meters, digital multimeters, laboratory measurement instruments, temperature controllers, process-monitoring displays, weighing systems, and portable data-acquisition equipment. The integrated display path is particularly useful where designers want a numeric readout without adding a separate display decoder or driver IC. When designing around the ICL7126CQH, begin with the manufacturer pin-description table and application information rather than assigning signals by function alone. Confirm the LCD glass segment mapping, input-source range, reference arrangement, timing components, and bypass requirements directly against the data sheet. Also evaluate the suggested ICL7136 before committing to a long-lived design if the project is newly started. This page organizes the verified package, display, resolution, interface, lifecycle, and sourcing details into an engineering-focused format. It also separates confirmed attributes from parameters that require direct comparison against the manufacturer data sheet, helping designers assess fit before committing the 44-LCC footprint to a PCB layout.

طلب عرض سعر اتصل بنا
ICL7126IPL+ - 3.5-Digit CMOS ADC | Maxim Integrated
ICL7126IPL+

ICL7126IPL+ - 3.5-Digit CMOS ADC | Maxim Integrated

The Maxim Integrated ICL7126IPL+ is a low-power, 3.5-digit successive-approximation A/D converter with an integrated voltage reference and clock, supplied in a 40-pin PDIP package. The converter is designed for low-power measurement systems and uses a differential input architecture with a resolution of 0.05 percent. The ICL7126IPL+ is the commercial-temperature, through-hole version of the ICL7126 family, with an operating range of 0°C to 70°C. An ADC is an interface component that converts an analog voltage into a numeric value for measurement, control, or display. The ICL7126 integrates the active circuitry required for a complete 3.5-digit measurement channel on one CMOS IC. Unlike discrete meter designs, its integrated reference, clock, and conversion system reduce component count while retaining direct measurement of slowly changing voltages. Key features include a true differential input and reference arrangement, a guaranteed zero reading for a zero-volt input, and true polarity at zero for precise null detection. The converter also provides approximately 1 pA typical input current. Its 3.5-digit architecture supports instrumentation displays and panel-meter applications where four digits of resolution are useful while a sign indicator improves readability around the zero point. The CMOS implementation emphasizes low operating power, making the device suitable for portable instruments and battery-operated measurement panels. Integration of the reference and clock simplifies board design by reducing the number of external timing and calibration components. Differential measurement can also reject common-mode voltage when the source and reference paths are arranged carefully, although real-world accuracy still depends on input filtering, reference quality, grounding, and analog-layout discipline. Typical uses include digital panel meters, laboratory measurement instruments, temperature and process monitoring, portable test equipment, and low-power sensor interfaces. The 40-pin PDIP package favors through-hole assembly, repairable prototypes, and larger industrial control boards where a surface-mount footprint would offer little practical benefit. Designers should verify the complete electrical limits and recommended operating circuit in the manufacturer datasheet before release. Pay particular attention to input and reference polarity, conversion timing, bypass-capacitor placement, and the relationship between source impedance and accuracy. A stable, low-noise reference path and short analog traces are essential for repeatable measurements. This product page combines the manufacturer product information with package-specific identification, application guidance, verified sourcing information, and drop-in replacement analysis. It also highlights the practical advantages and limitations of the 40-pin PDIP format for engineers deciding whether the ICL7126IPL+ fits an existing measurement-instrument design.

طلب عرض سعر اتصل بنا
ICL7129ACPL+ - 4.5-Digit Low-Noise LCD ADC | Maxim Integrated
ICL7129ACPL+

ICL7129ACPL+ - 4.5-Digit Low-Noise LCD ADC | Maxim Integrated

The Maxim Integrated ICL7129ACPL+ is a low-noise, 4.5-digit, single-chip analog-to-digital converter with multiplexed LCD drivers, supplied in a 40-pin PDIP package. It is designed for precision digital voltmeter, digital panel meter, laboratory instrument, process-control, and weighing-system applications. The device uses successive-integration conversion, provides high-impedance differential inputs, supports true ratiometric operation, and includes automatic polarity detection. Its integrated multiplexed LCD drivers reduce the number of external display-interface components, while the 4.5-digit resolution supports measurements up to 19,999 counts according to the manufacturer product information. The converter is intended for systems where a stable reference voltage and suitable input conditioning determine the final measurement accuracy. ICL7129ACPL+ is listed as a production product by Maxim Integrated, and the manufacturer describes it as a low-noise 4 1/2-digit ADC with multiplexed LCD drivers. The package provides through-hole DIP construction for straightforward prototyping and repair, although it is larger than modern surface-mount ADC packages. Engineers should pay attention to the reference voltage, input common-mode range, integration period, LCD segment drive requirements, and the external components used for noise filtering when designing a new instrument. The ICL7129ACPL+ is particularly useful when a legacy panel-meter architecture needs a proven display-driver and ADC combination without changing the mechanical format of the board.

طلب عرض سعر اتصل بنا
ICL7129CPL - 4.5-Digit LCD ADC | Intersil | 40-Pin PDIP
ICL7129CPL

ICL7129CPL - 4.5-Digit LCD ADC | Intersil | 40-Pin PDIP

Intersil Corporation ICL7129CPL is a 4.5-digit single-chip analog-to-digital converter that directly drives a multiplexed liquid-crystal display. The device combines successive-integration conversion, a precision reference input, and LCD segment-driver circuitry in a 40-pin PDIP package. It is intended for high-resolution measurement instruments where a stable digital reading and direct LCD presentation are required without a separate display driver. An LCD analog-to-digital converter is a specialized mixed-signal component that converts an analog input voltage into a numeric code and presents that code on a multiplexed LCD. The ICL7129 belongs to the broader ADC hierarchy while specializing in direct LCD instrumentation. Compared with general-purpose ADC systems, this integrated approach reduces the number of external components and simplifies the relationship between the conversion engine, digit and segment outputs, and the display. The ICL7129CPL provides 4.5-digit measurement resolution and uses the ICL7129 family's successive-integration conversion technique. The associated ICL7129A documentation identifies approximately ±20,000-count resolution, which supports fine readings in handheld meters and laboratory instruments. Direct LCD drive, CMOS construction, and a 40-pin dual in-line package make the device suitable for conventional through-hole instrument designs. Technical operation centers on the integrated successive-conversion loop, reference voltage, input stage, and display multiplexing. Only passive components and an external reference are needed for normal operation. Because the LCD outputs belong to the same package as the converter, segment-drive timing, reference stability, input filtering, and grounding directly influence displayed accuracy. The converter must also be matched to the selected LCD segment count and operating scheme. Typical uses include handheld digital multimeters, laboratory panel meters, industrial process indicators, temperature instruments, weighing displays, and general-purpose measurement panels. The device is particularly appropriate when a dedicated LCD and a 4.5-digit presentation are central to the product. It can also serve in legacy or repair applications where preserving the established 40-pin PDIP footprint and LCD interface is more important than adopting a newer display architecture. Designers should follow the manufacturer's pin-description and typical-application diagrams when assigning the reference, analog input, conversion-control signals, and LCD outputs. Keep the analog input and reference paths away from LCD drive traces and switching nodes, and place filtering or protection components close to their corresponding pins. Confirm LCD compatibility, reference voltage, timing, and grounding before releasing a new PCB. This product summary combines the ICL7129CPL identification, package information, converter architecture, display use cases, and drop-in family options into an engineering-focused reference. It also highlights the component-selection checks that matter when replacing a 4.5-digit LCD measurement front end without changing the existing through-hole board layout.

طلب عرض سعر اتصل بنا
ICL7135CAI+ - 4.5-Digit Dual-Slope ADC | Analog Devices
ICL7135CAI+

ICL7135CAI+ - 4.5-Digit Dual-Slope ADC | Analog Devices

The Analog Devices ICL7135CAI+ is a high-precision, monolithic 4.5-digit dual-slope analog-to-digital converter with a 2.0000 V full-scale capability and accuracy specified to ±1 count in 20,000. It accepts high-impedance differential inputs and provides multiplexed BCD outputs for driving a display in the 28-SSOP package. The converter combines reliable dual-slope conversion with a 0.5-count resolution increment. A dual-slope ADC is an integrating analog-to-digital converter that measures input voltage by comparing a controlled integration period with a reference-driven de-integration period. This technique belongs to the wider ADC, data-converter, and semiconductor hierarchies. It is especially useful when low-frequency measurements require good noise rejection and predictable behavior with slow-changing sensor signals. The ICL7135CAI+ provides a 4.5-digit measurement range, a 2.0000 V full-scale capability, and ±1 count in 20,000 accuracy. Its high-impedance differential input structure supports source impedances that would otherwise degrade simple resistive divider measurements. Multiplexed BCD outputs reduce the number of connections required when driving a seven-segment display, while the 28-SSOP format supports compact panel-meter and laboratory-instrument layouts. The manufacturer describes the ICL7135 as a monolithic converter designed around a dual-slope conversion architecture. Differential input handling is central to its measurement behavior because it permits a sensor signal to be measured relative to a return or reference node. The 4.5-digit result format supports a maximum reading of 19,999 counts, while the stated ±1-count-in-20,000 accuracy establishes the conversion-error target for the product family. Typical uses include digital panel meters, temperature measurement instruments, laboratory readouts, process monitoring, portable meters, and industrial measurement equipment. The device is particularly appropriate when a regulated reference, controlled input excitation, and a dedicated display interface are available. It is less suitable for high-speed waveform acquisition, communications, or applications requiring many conversions per second. For implementation, follow the manufacturer pin-description and application tables when assigning the reference, integrator, input, clock, and display signals. Stable reference and input components are central to repeatable dual-slope measurements, while correct grounding and protection are necessary when external sensors connect to the measurement terminals. This product record combines the official ICL7135 product information with distributor package, ordering, and availability details. It also distinguishes the closely related ICL7135CAI- temperature-grade variant from the ICL7135CMH-D, which uses a different 44-pin package, so engineers can assess replacement options without treating package-incompatible parts as drop-in substitutes.

طلب عرض سعر اتصل بنا
ICL7135CMH+D - 4.5-Digit Dual-Slope ADC | Analog Devices
ICL7135CMH+D

ICL7135CMH+D - 4.5-Digit Dual-Slope ADC | Analog Devices

The Analog Devices ICL7135CMH+D is a high-precision, monolithic 4.5-digit dual-slope analog-to-digital converter with multiplexed BCD output and differential high-impedance inputs. It provides ±1 count accuracy in 20,000 counts, a 2.0000 V full-scale range, auto-zero, auto-polarity, and true ratiometric operation. The device is packaged in a surface-mount 44-pin MQFP package. A dual-slope ADC is an integrating data-conversion technique that converts an unknown input voltage into a time interval and a digital count. It belongs to the ADC and data-converter hierarchy, where the ICL7135 is designed for high-resolution measurement rather than high-speed waveform capture. Its differential input architecture helps reject common-mode noise, while ratiometric operation allows the reference and source voltage to vary together when the measured quantity is proportional to the reference. The ICL7135CMH+D includes multiplexed BCD outputs for driving seven-segment displays, allowing a compact instrument design without requiring a separate display interface. The stated ±1-in-20,000-count accuracy is useful for panel meters, laboratory instruments, process monitoring, and precision instrumentation. Auto-zero and auto-polarity features reduce calibration effort and support bipolar measurement without changing the basic converter topology. The 2.0000 V full-scale capability gives the converter a defined input range when the reference is configured appropriately. Because the converter uses a dual-slope conversion process, conversion timing is relatively slow compared with a successive-approximation ADC, making the part more appropriate for continuously updated measurements than for rapid transient sampling. External clock, reference, input, and display-support components determine the complete measurement accuracy and operating behavior of the circuit. Typical applications include digital panel meters, temperature controllers, laboratory measurement instruments, weighing systems, process transmitters, and general-purpose industrial monitoring equipment. The 44-MQFP surface-mount package supports compact instruments and automated assembly. Designers should pay attention to reference stability, input filtering, clock timing, layout cleanliness, and the required BCD display interface when building a production circuit. This page combines the converter’s manufacturer specifications, package information, replacement considerations, and application guidance to support component selection and board-level design. Use the manufacturer datasheet for the complete pin-description table, timing diagrams, electrical limits, and recommended external-circuit values.

طلب عرض سعر اتصل بنا
ICL7135CN 4.5-Digit Precision ADC | Texas Instruments
ICL7135CN

ICL7135CN 4.5-Digit Precision ADC | Texas Instruments

The Texas Instruments ICL7135CN is a 4.5-digit precision dual-slope analog-to-digital converter with one differential input, 0.003 kSPS conversion rate, multiplexed BCD output, and a 2.0000 V full-scale capability in a 28-pin through-hole DIP package. The supplied distributor data identifies it as a display-driver ADC with ±1 count in 20,000 accuracy and high-impedance differential inputs. What is a dual-slope ADC? A dual-slope ADC integrates an unknown input for a fixed interval and then measures the time required for a reference to return the integrator toward zero. This method is well suited to precision measurement because it rejects periodic noise, averages short disturbances, and can provide high effective resolution with relatively simple analog circuitry. ICL7135CN belongs to the analog-to-digital converter, data-converter, and signal-measurement semiconductor hierarchy. Key features include 4.5-digit BCD-oriented measurement resolution, 2.0000 V full scale, multiplexed BCD output, true differential input, precision zero reading for a 0 V input, and precision null detection with true polarity at zero. The converter is intended for instrumentation applications where repeatable readings and direct display-driver compatibility matter more than high conversion throughput. Its dual-slope architecture favors noise rejection over sampling speed. The ICL7135CN integrates a successive approximation and dual-slope conversion approach according to the verified product descriptions. The external reference and input arrangement must be selected to match the intended measurement range, while the display interface is organized for multiplexed BCD output. Because the supplied search results identify a 28-pin DIP package, the physical design should use the appropriate through-hole footprint and pin assignments shown in the manufacturer documentation. Typical applications include digital panel meters, laboratory instruments, weighing systems, temperature measurement bridges, industrial process monitors, and precision test equipment. These systems benefit from the 4.5-digit readout, differential input capability, and ability to present decimal-aligned BCD results directly to display-driver circuitry. The relatively low conversion rate is suitable for continuously updated measurements rather than waveform acquisition or high-speed data logging. Designers should pay particular attention to reference stability, input impedance, integrator components, timing accuracy, bypass capacitors, and display-drive timing. Use the manufacturer datasheet for the complete electrical limits and pinout, and verify the zero-input and null-detection behavior during calibration. This page combines verified distributor descriptions with engineering guidance while avoiding unverified electrical values that are not present in the supplied data.

طلب عرض سعر اتصل بنا
ICL7135CPI+ 4.5-Digit BCD ADC | Maxim Integrated
ICL7135CPI+

ICL7135CPI+ 4.5-Digit BCD ADC | Maxim Integrated

The Maxim Integrated ICL7135CPI+ is a 4.5-digit, BCD-output analog-to-digital converter with multiplexed display outputs in a 28-pin plastic DIP package. It combines dual-slope conversion reliability with an accuracy of ±1 count in 20,000 and a full-scale range of 2.0000 V. The differential input architecture supports measurement systems requiring high input impedance and rejection of common-mode interference. A dual-slope integrating ADC is a signal-conditioning and conversion category that averages an unknown voltage over a fixed integration interval and compares the result with a reference. Within the broader hierarchy, the ICL7135CPI+ is an analog-to-digital converter, an integrated data-conversion circuit, and a semiconductor intended for precision measurement and display instrumentation. Dual-slope conversion is especially useful when resistance, temperature, or slow-changing sensor signals are converted into stable numerical readings. The principal feature set includes 4.5-digit resolution, multiplexed binary-coded decimal outputs for four digit-drive positions, and high-impedance differential inputs. The ±1-count-in-20,000 accuracy specification provides a useful figure for panel meters and digital voltmeters. Its 2.0000 V full-scale capability lets the designer define the measurable range with an external reference. The multiplexed BCD architecture reduces the number of dedicated output signals required to drive a visual display. Technically, the converter separates its analog and digital functions. The analog section develops an integrated representation of the differential input, while the digital section contains counters, timing control, input interfaces, output interfaces, and the logic that coordinates each measurement cycle. This integrating approach favors noise rejection and repeatable readings when the input changes slowly, although conversion time is longer than with a high-speed successive-approximation ADC. Typical uses include digital panel meters, digital voltmeters, laboratory instruments, temperature-measurement panels, process-monitoring displays, and weighing equipment. The ICL7135CPI+ is especially appropriate when a readable decimal display, differential input, and deterministic integration cycle are more important than high conversion throughput. The BCD outputs are intended to interface naturally with digit drivers and display-oriented instrument designs. Designers should verify reference accuracy, input-common-mode range, integration-cycle timing, digit-driver polarity, and display multiplexing against the manufacturer datasheet before layout release. Because this is a through-hole 28-pin DIP device, its physical package differs from surface-mount display ADC families and should not be treated as a board-level equivalent. The manufacturer datasheet remains the controlling source for pin names, timing, and electrical limits. This page consolidates the verified distributor price, package information, function description, available drop-in candidates, comparison parameters, and practical design cautions. That engineering-focused context helps buyers distinguish a genuine 28-pin replacement from a merely similar 4.5-digit converter and supports faster qualification without replacing the manufacturer datasheet as the authoritative design reference.

طلب عرض سعر اتصل بنا
ICL7135CPI-2 - 4.5-Digit BCD A/D Converter | Maxim
ICL7135CPI-2

ICL7135CPI-2 - 4.5-Digit BCD A/D Converter | Maxim

Maxim Integrated ICL7135CPI-2 is a high-precision 4.5-digit monolithic analog-to-digital converter with multiplexed BCD outputs, differential inputs, and a 2.0000 V full-scale range in a 28-pin PDIP package. It uses a dual-slope conversion architecture with automatic zeroing, automatic polarity, and ratiometric operation, making it suitable for precision measurement systems and digital display instruments. A BCD A/D converter converts an analog input voltage into a binary-coded decimal value intended for direct display decoding. The ICL7135 belongs to the dual-slope ADC family, a converter category valued for predictable accuracy, excellent rejection of periodic noise, and suitability for low-rate panel measurements. Its architecture supports high-impedance differential input measurement while providing separate multiplexed digit outputs for four-digit plus sign displays. Key features include 4.5-digit resolution, ±1 count in 20,000 accuracy, and a 2.0000 V full-scale capability. Differential inputs allow the converter to measure the voltage between two sources rather than only one input referenced to ground. Nearly ideal differential linearity, true ratiometric operation, auto-zero, and auto-polarity reduce calibration requirements and simplify front-end design. The converter combines an analog measurement section with a digital timing and output section. During dual-slope conversion, the converter integrates the unknown input for a fixed interval and then compares the resulting reference charge against a controlled counter. Differential linearity and noise rejection arise from this controlled integration process. Multiplexed BCD outputs reduce the number of package pins required to communicate the measurement to display drivers. Typical applications include laboratory and bench-top meters, digital panel meters, weighing scales, process-monitoring equipment, temperature-measurement instruments, and laboratory power supplies. The high-impedance differential input is particularly useful when the source has limited drive capability or when measurement errors from common-mode voltage must be reduced. When implementing the circuit, place input and reference-network components close to the converter and maintain clean, low-leakage analog routing around the high-impedance inputs. Select stable reference and integration capacitors with suitable dielectric characteristics, and verify the displayed zero and span behavior over the expected temperature range. The 28-pin PDIP footprint favors through-hole instrumentation designs rather than compact surface-mounted products. This product page combines the official ICL7135 family information with a package-aware comparison, practical design guidance, and same-footprint replacement considerations for engineers maintaining legacy precision-meter platforms.

طلب عرض سعر اتصل بنا
ICL7135CPIZ - 4.5-Digit BCD ADC | Renesas Electronics
ICL7135CPIZ

ICL7135CPIZ - 4.5-Digit BCD ADC | Renesas Electronics

The Renesas Electronics ICL7135CPIZ is a precision 4.5-digit analog-to-digital converter with multiplexed binary-coded-decimal output and integrated display drivers, packaged in a 28-pin PDIP. It combines dual-slope conversion reliability with accuracy of ±1 count in 20,000, a 2.0000 V full-scale capability, and high-impedance differential inputs. The converter operates at approximately 2 samples per second for applications requiring stable numeric measurement rather than high-speed waveform acquisition. A dual-slope integrating ADC is a mixed-signal data-conversion device that averages an input over controlled integration periods to suppress constant noise and reject unwanted frequencies. Within the broader hierarchy of analog-to-digital converters, data converters, and semiconductor signal-chain devices, the ICL7135 family is intended for digital-panel meters, digital voltmeters, laboratory instruments, weighing systems, and other equipment that must present a stable decimal result while also driving a multidigit display. The ICL7135CPIZ includes four digit-drive outputs for multiplexed display operation and multiplexed BCD outputs for external decoding or digital processing. Its dual-slope conversion method is suited to slowly changing measurements because it offers good noise rejection without the complexity and switching noise of a high-frequency successive-approximation converter. The 4.5-digit architecture permits a negative 1-digit range for zero and overload indication in many panel-meter implementations. The converter's differential input arrangement supports source impedance balancing and rejection of common-mode signals when the analog front end is designed correctly. With a 2.0000 V full-scale range, the 4.5-digit resolution corresponds to approximately 100 microvolts per count. This relationship makes the device suitable for precision measurement of voltage, resistance derived through a reference divider, temperature through a linearized sensor network, and other slowly varying quantities. Typical uses include laboratory digital voltmeters, industrial panel meters, laboratory balances, process-monitoring instruments, and test equipment with decimal LED or LCD readouts. The integrated digit drivers simplify displays containing multiple digits, while the BCD interface allows the measurement result to be captured by a controller when an instrument also requires remote monitoring or data logging. PCB design should preserve the high-impedance analog input path, provide a clean reference connection, and route display-driver and converter outputs away from sensitive input and reference nodes. Component tolerances, reference stability, input leakage, and grounding determine whether the converter's nominal resolution is realized in the finished instrument. The manufacturer datasheet should be used to assign every physical pin and implement the recommended input, reference, and bypass networks. This page combines the converter's core architecture, package and interface characteristics, engineering guidance, comparison points, and practical application context. It is intended to support design selection and board planning rather than replace the manufacturer datasheet, reference schematic, or final qualification testing.

طلب عرض سعر اتصل بنا
ICL7135CQI+ - 4.5-Digit Differential ADC | Analog Devices
ICL7135CQI+

ICL7135CQI+ - 4.5-Digit Differential ADC | Analog Devices

The Analog Devices ICL7135CQI+ is a 4.5-digit monolithic analog-to-digital converter with differential inputs, multiplexed BCD outputs, and a 28-pin PLCC package. The device combines a 2.0000 V full-scale input capability with accuracy specified as ±1 count in 20,000 and is designed for precision measurement systems requiring direct BCD display output. A dual-slope ADC is a signal-conversion architecture that integrates an unknown input voltage over a defined interval and compares it with a reference-driven ramp. In a broader hierarchy, the ICL7135CQI+ is an ADC, a data-converter IC, and a precision measurement component. Its BCD outputs can reduce the display-processing burden in instruments, while differential input architecture helps reject common-mode disturbances when suitable source and reference arrangements are used. Key characteristics include 4.5-digit resolution, differential analog inputs, multiplexed parallel BCD outputs, and dual output polarity. The Analog Devices product page identifies the ICL7135 as a high-precision monolithic converter with ±1 count in 20,000 accuracy. These attributes make it applicable to laboratory instruments, panel meters, weighing systems, temperature measurement, and other linear analog measurement products. The converter architecture divides each measurement cycle into distinct phases controlled by internal counters, input interfaces, output interfaces, and control logic. Its differential input stage operates with high input impedance, which is useful when measuring slowly changing sensor signals and when the source impedance is not extremely low. The 2.0000 V full-scale reference requirement also places a clear constraint on analog front-end and reference design. Typical applications include digital panel meters, laboratory measurement equipment, process monitoring, resistance and temperature measurement, and other display-oriented instruments. The multiplexed BCD outputs are particularly useful when the measured value must be presented directly through seven-segment display drivers without requiring a complex digital data bus. For PCB implementation, place the input, reference, and bypass connections according to the manufacturer datasheet and keep sensitive analog routing compact. Designers should also verify timing, conversion-cycle behavior, display multiplexing requirements, and output logic levels against the target instrument rather than treating the converter as a generic modern high-speed ADC. This product page organizes the verified technical characteristics, sourcing information, drop-in candidate assessment, application guidance, and design considerations around the ICL7135CQI+. It is intended to help engineers determine whether its dual-slope architecture, BCD interface, differential inputs, and 28-pin PLCC package fit a precision display-oriented measurement design.

طلب عرض سعر اتصل بنا
ICL7135CQI+T 4.5-Digit ADC | Analog Devices | Precision
ICL7135CQI+T

ICL7135CQI+T 4.5-Digit ADC | Analog Devices | Precision

Analog Devices ICL7135CQI+T is a monolithic 4.5-digit dual-slope analog-to-digital converter with multiplexed BCD outputs, high-impedance differential inputs, and a 2.0000 V full-scale capability. The commercial-temperature device is packaged in a 28-pin PLCC and identified by the ICL7135CQI+T tape-and-reel ordering code. According to the Analog Devices product page, its specified accuracy is ±1 count in 20,000, providing a suitable basis for precision panel-meter and digital-indicator measurements. A dual-slope ADC is a sigma-delta-style integrating converter that repeatedly ramps and measures an input against a fixed reference. The ICL7135 divides each conversion into measuring and integrating phases, rejecting much of the periodic noise found in industrial environments. Its integration period helps average unwanted components of the input while retaining the resolution required for a 4.5-digit display. In the system hierarchy, it is an ADC, an analog-to-digital converter, a data-acquisition IC, and ultimately a semiconductor. Key features include 4.5-digit resolution, multiplexed BCD outputs suitable for decimal display drivers, differential high-impedance input architecture, and a specified 2.0000 V full-scale range. The multiplexed output interface reduces the number of dedicated output pins by sharing digit and BCD data lines. This makes the device useful for standalone panel meters and digital instruments that need displayed numerical results rather than a conventional binary-coded output for a digital bus. The ICL7135 separates its analog and digital functions into dedicated circuit areas. The analog section includes the differential input path, integrator, reference comparison, and analog output multiplexing, while the digital section contains counters, timing control, output drivers, and control logic. Its dual-slope architecture supports good noise performance without requiring a high-speed successive-approximation conversion pipeline. Users should nevertheless provide stable reference and input conditions because gain accuracy is tied to reference quality and conversion timing. Typical uses include digital panel meters, laboratory instruments, weighing systems, process-monitoring equipment, temperature controllers, and laboratory-grade measurement panels where a 4.5-digit BCD display is preferred. The differential inputs can measure bipolar or unipolar signals when the external analog network is designed for the selected reference and full-scale range. In each application, the front-end divider, reference source, input filtering, and display interface remain as important as the converter itself. For PCB implementation, place the reference and input-network components close to their associated pins, keep digital BCD routes away from sensitive analog nodes, and provide the bypass and filtering specified by the manufacturer datasheet. Confirm timing, polarity, input-range, and BCD-output details against the ICL7135 datasheet before final routing. Commercial availability, current lot status, and a formal quotation should be confirmed through the Request a Quote form on this page. This product page combines the manufacturer’s converter description with package details, application engineering guidance, and procurement-oriented information. It is designed to help engineers verify the 4.5-digit architecture, BCD display interface, PLCC footprint, reference requirements, and replacement constraints before committing the part to a new instrument design.

طلب عرض سعر اتصل بنا
ICL7136CDL - 3.5-Digit LCD A/D Converter | Analog Devices
ICL7136CDL

ICL7136CDL - 3.5-Digit LCD A/D Converter | Analog Devices

The Analog Devices ICL7136CDL is a low-power 3.5-digit analog-to-digital converter with integrated seven-segment decoders, display drivers, voltage reference, and clock circuitry in a 40-pin CERDIP package. It is designed for direct interface with a liquid-crystal display and supports measurements with very high input impedance, reducing the loading applied to the sensed signal. An integrated A/D converter is a mixed-signal IC that converts an analog input voltage into a digital numeric value. The ICL7136 belongs to the ADC/DAC category, combines data conversion with display-interface functions, and is used where a compact measurement system must present a value directly on an LCD. Unlike a discrete measurement design, it integrates the conversion, reference, clock, decoding, and display-driving blocks into one device. The converter provides 3.5-digit resolution, low-power operation, seven-segment display decoding, LCD segment drivers, a multiplexed LCD backplane output, an internal voltage reference, and an integrated clock. Overrange recovery is an improvement over the earlier ICL7126. The available product listing identifies the ICL7136CDL specifically as a 40-CERDIP device, making it suitable for established through-hole industrial, laboratory, and instrumentation designs. Internally, the device combines successive-approximation conversion techniques with the supporting analog and digital blocks needed for autonomous panel measurement. The integrated reference reduces the number of precision external components, while the high-impedance input helps preserve the accuracy of the signal under test. The segment decoders and LCD drivers reduce display-interface complexity compared with a general-purpose converter followed by a separate display controller. Typical applications include digital panel meters, laboratory measurement instruments, temperature measurement systems, process-monitoring equipment, weighing indicators, and portable diagnostic instruments. In each case, the converter can drive the LCD directly while the external analog front end determines the measured quantity. The LCD architecture also suits handheld or bench instruments where a numerical display is more practical than a host-controlled graphical interface. Designers should verify the complete electrical limits, reference accuracy, conversion timing, input ranges, and display compatibility against the manufacturer datasheet before release. PCB layout must preserve the pinout of the 40-pin CERDIP footprint, provide adequate bypass capacitance, and keep sensitive analog-input routing away from display-driver and clock signals. External component values and timing requirements should not be inferred from generic ADC designs. This page combines verified manufacturer and distributor information, structured specifications, application guidance, sourcing questions, and explicitly recorded data gaps. It does not present unsupported electrical values as facts; unavailable parameters remain clearly identified in the specification table for engineering review.

طلب عرض سعر اتصل بنا
ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices
ICL7136CMH

ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

The Analog Devices ICL7136CMH is a low-power, 3.5-digit dual-slope analog-to-digital converter with automatic calibration, true differential input, and differential reference capability in a 44-pin MQFP package measuring 10 mm by 10 mm. Its primary specifications include a 3.5-digit resolution, 9 V operating supply, and 500 mW power dissipation rating. An ADC is a semiconductor that converts an analog voltage into a numeric value. The ICL7136 belongs to the dual-slope ADC family, a class of converters that integrates an input signal over a fixed interval and measures the resulting integration time against a reference. This technique is well suited to instruments where predictable behavior, rejection of periodic interference, and usable resolution matter more than very high conversion speed. Key features include automatic calibration, true differential input, and a differential reference arrangement. Automatic calibration helps establish a repeatable measurement baseline, while the dual-slope architecture rejects interference signals common in industrial environments. Differential measurements also support ratiometric sensing, where output code depends on the ratio of an unknown input to a related reference. The ICL7136 integrates a 3.5-digit BCD-to-seven-segment display driver, allowing measured values to be presented directly on common digital display devices. This combination of measurement and display excitation simplifies panel-meter, laboratory-instrument, and industrial-control designs by reducing the number of external interface components. Typical uses include digital panel meters, temperature measurement systems, resistive and bridge transducers, laboratory meters, and process-monitoring equipment. The differential input and reference architecture is particularly useful in ratiometric measurements, where sensing-element drift can be reduced when the excitation and measurement paths share corresponding variations. When designing around the ICL7136CMH, preserve the analog and reference layout implied by the manufacturer application guidance, use suitable input and reference filtering, and verify display-drive compatibility with the selected seven-segment display. Because the MQFP-44 package has fine-pitch leads and a thermal pad, assembly and layout planning should account for lead geometry, soldering process, and thermal dissipation. This product page consolidates the confirmed ICL7136 family characteristics, sourcing information, same-package alternatives, and practical selection guidance. It helps engineers compare the commercial-grade ICL7136 variants by package, temperature range, supply voltage, and power rating before committing to a PCB footprint.

طلب عرض سعر اتصل بنا
ICL7136CPL+ - 3.5-Digit LCD A/D Converter | Analog Devices
ICL7136CPL+

ICL7136CPL+ - 3.5-Digit LCD A/D Converter | Analog Devices

Analog Devices ICL7136CPL+ is a low-power, 3.5-digit monolithic analog-to-digital converter with integrated seven-segment decoders, display drivers, voltage reference, and clock circuitry. The device is designed to interface directly with a non-multiplexed liquid-crystal display and includes a 40-pin PDIP package. Its headline specifications are 3.5-digit resolution, differential and single-ended input operation, and low-power conversion in a display-oriented integrated circuit. An integrated 3.5-digit A/D converter combines analog measurement, digital conversion, and display excitation in one package. This type of converter is used where a compact instrument must display a measured voltage, current, resistance, or temperature without requiring a separate display driver. The ICL7136CPL+ uses a dual-slope conversion technique, providing a measurement architecture suited to stable, low-rate instrumentation rather than high-speed signal acquisition. The ICL7136CPL+ includes onboard segment drivers, segment decoders, a voltage reference, and a clock, reducing the number of external display-support components required. The Analog Devices product page identifies it as a production part and describes it as a low-power 3 1/2-digit A/D converter. The integrated display interface is intended for LCD displays, while the converter's differential-input capability supports measurement arrangements that reject common-mode effects when used with suitable input circuitry. The dual-slope conversion method integrates the input over a fixed interval, providing a measurement result that is less sensitive to certain noise and timing variations than a simple instantaneous conversion. The device is intended for panel meters, digital instruments, laboratory measurement equipment, and other systems where a stable numeric display is required. External passive components and the selected input network remain important for achieving the intended accuracy and input impedance. Typical uses include handheld meters, process-monitoring displays, temperature-measurement instruments, laboratory equipment, and embedded display panels. In each case, the ICL7136CPL+ can combine the measurement front end and LCD drive functions while leaving the host system free to focus on control, data logging, or user interaction. Designers should follow the manufacturer pin-description table when assigning PCB nets and should confirm the display polarity, segment count, input configuration, reference arrangement, and bypass requirements against the manufacturer datasheet. The 40-pin PDIP footprint is mechanically straightforward but occupies substantial board area, so DIP availability and assembly method should be checked during product planning. This product page consolidates the ICL7136 family specifications, verified package information, sourcing guidance, comparison parameters, and practical replacement considerations to support faster engineering evaluation and board-level planning.

طلب عرض سعر اتصل بنا
ICL7136CPL+3 - 3.5-Digit LCD ADC | Analog Devices
ICL7136CPL+3

ICL7136CPL+3 - 3.5-Digit LCD ADC | Analog Devices

The Analog Devices ICL7136CPL+3 is a low-power, 3.5-digit monolithic analog-to-digital converter with direct liquid-crystal display drive in a 40-pin PDIP package. It combines a high-impedance analog input stage, seven-segment decoders, display drivers, an integrated voltage reference, and a clock circuit, allowing a measurement system to display the converted value without external display-driver circuitry. A 3.5-digit ADC is a metering converter designed to resolve approximately 1999 count increments when paired with its decimal display. This resolution class is commonly used for panel meters, laboratory instruments, scales, process monitors, and portable measurement equipment where a readable numeric display is more important than high-resolution waveform acquisition. The ICL7136 belongs to the ADC/DAC and data-converter hierarchy within integrated circuit and display-interface applications. The principal advantages of the ICL7136 are its very high input impedance, low-power operation, integrated reference and clock, and direct non-multiplexed LCD drive. These characteristics reduce external component count and simplify instrumentation designs. Seven-segment decoders and segment drivers are integrated on-chip, while the voltage reference and clock circuit establish the internal operating conditions needed for repeatable measurements. The converter uses a dual-slope conversion technique suited to low-speed precision measurement. Dual-slope operation integrates the unknown input for a defined interval and compares the result against an internally generated reference interval. This architecture favors predictable behavior, resistance to noise within the designed bandwidth, and good performance when measuring slowly changing sensor signals rather than high-frequency waveforms. The integrated clock removes the need for an external timing source. Typical ICL7136CPL+3 applications include digital panel meters, temperature indicators, pressure and force displays, laboratory bench instruments, medical equipment, and industrial process readouts. In these systems, the device converts a differential analog input and drives a dedicated LCD, simplifying the front end while preserving the familiar 3.5-digit presentation. PCB design should preserve analog signal integrity around the input and reference nodes and provide suitable bypass capacitance near the supply pins. Because this is a through-hole PDIP device, designers should also account for its larger footprint compared with surface-mount converter packages. Confirm display polarity, segment wiring, input range, reference details, and timing requirements against the manufacturer datasheet before layout release. This product page combines manufacturer and distributor information with a pin-compatible comparison, application guidance, and practical design notes. It is intended to help engineers evaluate the ICL7136CPL+3 for legacy instrumentation, retrofit programs, and new low-speed metering designs that require a self-contained 3.5-digit ADC and LCD driver.

طلب عرض سعر اتصل بنا
ICL7136CQH+ - Low-Power 3.5-Digit LCD A/D Converter | Analog Devices
ICL7136CQH+

ICL7136CQH+ - Low-Power 3.5-Digit LCD A/D Converter | Analog Devices

Analog Devices ICL7136CQH+ is a low-power, 3.5-digit monolithic analog-to-digital converter with integrated LCD display-driver circuitry. The device is designed for measurement systems that require a high-input-impedance front end and direct excitation of a non-multiplexed liquid-crystal display. Its integrated block includes segment drivers, segment decoders, a voltage reference, and a clock circuit, reducing the need for external display-drive circuitry in suitable instrument designs. The ICL7136CQH+ is associated with the Maxim Integrated ICL7136 family and is offered in a 44-lead PLCC, or 44-LCC J-lead, package. A 3.5-digit A/D converter is commonly used for panel meters, laboratory instruments, process monitoring, weighing equipment, and portable measurement equipment. The 3.5-digit format provides adequate resolution for displaying a signed or unsigned measurement while maintaining a compact instrument layout. Because the ICL7136 integrates the display interface, the converter can be paired directly with a compatible non-multiplexed LCD when the display and board requirements match the device's electrical and timing specifications. The ICL7136 architecture is based on a dual-slope conversion approach, a technique commonly used in precision panel-meter converters because it provides good rejection of periodic noise when the integration and reference relationships are designed appropriately. The high input impedance helps isolate the measurement node from the converter input, allowing the sensor or signal-conditioning network to be designed around the required source impedance and measurement range. The integrated voltage reference and clock support a self-contained measurement channel, while the LCD outputs reduce the number of external display-driver connections. The ICL7136CQH+ is particularly relevant to industrial and laboratory instrumentation where a dedicated numeric LCD readout is preferred over a high-speed sampled data converter. The package and function make it suitable for panel-meter products, handheld test equipment, digital laboratory instruments, process indicators, and data-acquisition front ends with relatively slow measurement requirements. When evaluating the device, check the electrical limits, input configuration, reference requirements, display timing, and pin-specific connection requirements in the manufacturer data sheet. The 44-lead PLCC package is a through-hole, leaded surface-mount-style package with J-leads, making it different from small-outline and fine-pitch packages used in newer compact instruments. The principal design trade-off is integration and display convenience versus package size and the need to design around the converter's specified operating conditions. For new designs, confirm the exact package variant, temperature range, supply requirements, and pin assignment against the current Analog Devices or Maxim Integrated documentation.

طلب عرض سعر اتصل بنا
ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices
ICL7136CQH+D

ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

Analog Devices ICL7136CQH+D is a low-power, 3.5-digit dual-slope analog-to-digital converter with an integrated LCD display driver in a 44-pin PLCC package measuring 16.59 mm by 16.59 mm. It is designed for precision measurement systems that need differential input and reference behavior, automatic rejection of periodic interference, and direct LCD output without a separate display interface. A dual-slope ADC is a voltage-to-digital conversion method that integrates an unknown input over a fixed interval and compares the result with a reference. It belongs to the ADC hierarchy, performs one analog-to-digital conversion function, and provides a multi-digit BCD result intended for digital panel meters. The ICL7136 family improves this architecture with a true differential input, a true differential reference, ratiometric measurement support, and a zero-integrator phase that reduces overrange hangover and hysteresis effects. The ICL7136CQH+D combines low-power operation with a 3.5-digit readout and integrated LCD drive circuitry. Its differential input and reference arrangement is useful for bridge transducers, resistance measurement, and other ratiometric sensors because the result can depend on the ratio between the measured quantity and the excitation reference. The automatic rejection of periodic interference helps reduce errors from common industrial noise sources. The integrated display driver reduces the need for separate logic in standalone instrumentation. The zero-integrator phase is a significant implementation detail. Following overrange, the converter returns its integrator toward zero rather than immediately beginning another measurement with residual charge. This feature improves recovery behavior and helps avoid overrange-related hysteresis. The converter also supports dual-slope conversion, which trades conversion speed for noise rejection and is especially useful when the measured signal changes more slowly than the conversion cycle. Typical uses include digital panel meters, laboratory measurement instruments, process monitoring, weighing systems, temperature bridges, and portable meters with LCD displays. For bridge-based sensors, ratiometric operation can compensate for many excitation-voltage variations. For applications requiring higher throughput, software-controlled switching systems, or electrical isolation, a modern sigma-delta or successive-approximation ADC may be a better architectural choice than the ICL7136CQH+D. Use the pin-description table in the manufacturer datasheet to assign signals to all 44 PLCC leads, and confirm the required reference, input, bypass, display, and logic connections before layout release. Preserve the specified input and reference grounding strategy because differential measurements can be sensitive to common-mode voltage and leakage. Confirm operating temperature, supply limits, conversion timing, and display-drive levels against the exact suffix ordering before production release. This page organizes the confirmed product identity, package information, sourcing data, replacement considerations, and application guidance into an engineering-oriented reference. It also distinguishes direct suffix alternatives from functionally similar converters so that designers can focus on true footprint-compatible choices rather than broad, mechanically incompatible substitutes.

طلب عرض سعر اتصل بنا
ICL7137CDL - Dual-Slope 4.5-Digit ADC | Analog Devices
ICL7137CDL

ICL7137CDL - Dual-Slope 4.5-Digit ADC | Analog Devices

Analog Devices ICL7137CDL is a monolithic 4.5-digit dual-slope analog-to-digital converter designed to drive a light-emitting diode display directly. It operates from a bipolar power supply, supports automatic calibration, and draws less than 200 uA of supply current when LED display current is excluded. The converter is packaged in a commercial-grade, 40-pin through-hole DIP. The ICL7137CDL combines an analog input stage, dual-slope conversion system, digital counter, and display-driving circuitry in one integrated circuit. A dual-slope ADC is a type of integrating analog-to-digital converter that measures an unknown input voltage by integrating it for a fixed interval and then measuring the time required to return the integrator to zero. This technique provides good noise immunity for slowly changing signals, including outputs from temperature sensors, pressure transducers, strain gauges, and slow analog measurement systems. The ICL7137 family also incorporates auto-zeroing and auto-calibration functions intended to reduce offset and gain-related errors. The principal operating characteristics include a commercial temperature range of 0 C to +70 C, bipolar supply operation, automatic calibration, and supply current below 200 uA excluding display current. The low power consumption makes the converter suitable for battery-operated instruments and portable measurement equipment. The direct LED-display interface reduces the need for external display drivers, while the 40-pin DIP package supports conventional through-hole PCB assembly and prototyping. ICL7137CDL is most appropriate for precision digital voltmeters, panel meters, laboratory measurement equipment, temperature controllers, load-cell instrumentation, and general-purpose slow-rate data acquisition. When designing around the converter, the input signal range, reference voltage, integration period, system resolution, and display driver requirements must be evaluated together. A stable reference and carefully routed analog inputs are important because both directly influence conversion accuracy and repeatability. Thermal and supply design should account for the component's bipolar supply arrangement and the power contribution from the display. The datasheet should be consulted for the complete electrical limits, recommended operating conditions, input and reference topology, timing relationships, and pin descriptions before laying out a new board. Commercial temperature grade makes this suffix appropriate for indoor laboratory and industrial equipment where the specified ambient range is respected. This page consolidates the verified product characteristics, comparison limits, application guidance, and replacement considerations. It also identifies unresolved technical fields explicitly so engineers can distinguish documented operating facts from parameters that must be confirmed in the manufacturer datasheet before production release.

طلب عرض سعر اتصل بنا
ICL7137CMH - 3.5-Digit LED ADC | Maxim Integrated
ICL7137CMH

ICL7137CMH - 3.5-Digit LED ADC | Maxim Integrated

The Maxim Integrated ICL7137CMH is a monolithic 3.5-digit dual-slope analog-to-digital converter with active devices that directly interface with an LED display. The converter is packaged in a 44-pin MQFP measuring 10 x 10 mm and is identified as a one-channel ADC for LED display instrumentation. According to the Analog Devices product page, the ICL7137 consumes less than 200 uA, excluding the current required by the LED display, making it suitable for battery-operated instruments. An integrated 3.5-digit LED display ADC is a specialized data-converter and display-control component. It combines analog measurement, digital counting, and display drive functions in one monolithic device. The dual-slope conversion technique used by the ICL7137 integrates the input voltage over a fixed interval, rejecting periodic noise and providing accurate results for slow-moving or repetitive measurements. This architecture fits the hierarchy ADC > data converter > integrated circuit > semiconductor. The defining feature of the ICL7137 is direct LED-display support. Unlike a general-purpose ADC that outputs only a digital code, the device includes the active circuitry needed to illuminate a multiplexed seven-segment display. The 3.5-digit format supports readings from negative 999 through positive 999, subject to the detailed reference, input, and operating conditions in the manufacturer datasheet. Its low supply current makes it especially relevant to handheld meters, panel instruments, and portable measurement systems. Dual-slope conversion offers useful advantages for panel meters because its accuracy does not depend on a high-frequency clock being multiplied into the measurement result in the same way as many successive-approximation converters. The averaging behavior helps attenuate periodic interference. The manufacturer describes versatility and accuracy as inherent features of the converter, while the integrated clock, reference, counter, and display-driver functions reduce the external component count required for a complete measurement instrument. Typical implementations include digital multimeters, laboratory panel meters, temperature-measurement instruments, process-monitoring displays, laboratory equipment, and battery-powered meters. The direct LED interface is especially valuable when a readable numerical display is required at the point of measurement. Such systems can use the converter without adding a separate display decoder or segment driver, reducing board area and simplifying firmware requirements. The main design considerations are reference stability, input-range implementation, display current, layout, and timing. The input and reference networks must be designed around the electrical limits specified by the manufacturer datasheet. Display resistors and LED current determine brightness and power consumption, while the under-200-uA supply-current figure explicitly excludes display current. PCB placement should keep analog input, reference, and clock paths away from display-return currents and switching nodes. This page organizes the ICL7137CMH specifications, package information, sourcing path, practical use cases, and verified same-footprint alternatives. It also separates the low converter supply consumption from the additional power demanded by the LED display, helping engineers evaluate both instrument accuracy and battery-life requirements before selecting the ADC and display circuitry.

طلب عرض سعر اتصل بنا
ICL7137CMH+D - 3.5-Digit LED Display ADC | Maxim Integrated
ICL7137CMH+D

ICL7137CMH+D - 3.5-Digit LED Display ADC | Maxim Integrated

Analog Devices ICL7137CMH+D is a low-power, 3.5-digit dual-slope analog-to-digital converter designed to drive a seven-segment LED display directly. The device operates from a single 5 V supply, consumes less than 200 µA excluding LED display current, and is packaged in a 44-pin MQFP measuring 10 mm by 10 mm. These characteristics make it suitable for precision panel meters, laboratory instruments, and portable measurement equipment. An ADC is an integrated circuit that converts an analog voltage into a digital value. The ICL7137 belongs to the ADC hierarchy and combines analog measurement, digital counting, reference-voltage control, and LED display-drive circuitry in one package. Its dual-slope conversion technique integrates the input over fixed time intervals, reducing sensitivity to short disturbances and supporting accurate measurement with comparatively simple external circuitry. The principal features include direct seven-segment LED display drive, a 3.5-digit measurement format, low battery-oriented supply consumption below 200 µA, and integrated conversion and counting functions. Excluding current drawn by the LEDs, the low supply demand is particularly important in handheld meters where the converter must remain active for extended periods. The commercial temperature version is specified for 0 °C to 70 °C. Technical operation is based on dual-slope conversion rather than a conventional successive-approximation converter. During conversion, the device integrates the unknown input and a reference-derived ramp, then determines the balance between them through counting. This architecture is well suited to panel-meter applications because it provides good rejection of periodic noise and requires only an input integrator, reference integration path, clock, and display interface. Typical uses include digital bench multimeters, laboratory panel meters, digital thermometers, laboratory displays, and portable instrumentation. The integrated LED-drive outputs reduce the number of external display-interface components, while the low converter supply current supports battery-operated products. A 10 mm by 10 mm square surface-mount package also supports compact instrument designs without using a large through-hole footprint. The main PCB consideration is to keep the analog input, reference, and compensation connections short and away from digital display lines. The external reference network and timing components directly affect accuracy and conversion behavior, so they should follow the manufacturer application diagram and use stable, low-temperature-drift parts. Adequate decoupling is also required near the supply pins. This product page organizes the ICL7137CMH+D specifications, verified manufacturer and distributor references, same-footprint alternatives, and application guidance. It also highlights practical selection trade-offs involving display type, interface behavior, package configuration, operating temperature, and the need to validate every substitute against the original circuit schematic.

طلب عرض سعر اتصل بنا