المنتجات (44,000+)

MCP3304-CI/SL - 13-Bit 4-Channel SAR ADC | Microchip
MCP3304-CI/SL

MCP3304-CI/SL - 13-Bit 4-Channel SAR ADC | Microchip

The Microchip Technology MCP3304-CI/SL is a 13-bit successive-approximation analog-to-digital converter with 100 ksps conversion speed, four differential or eight single-ended inputs, and an SPI serial interface in a 16-pin SOIC package. It operates from a single 5.5 V supply, making it suitable for battery-powered measurement systems, industrial data acquisition, and remote sensor interfaces. An ADC is a data-acquisition IC that converts an analog voltage into a digital number for processing, display, logging, or control. The MCP3304 belongs to the SAR ADC family, which uses a successive-approximation conversion process and provides a practical balance between resolution, throughput, power consumption, and cost. Its differential inputs reject common-mode noise and support direct measurement of bipolar or ratiometric sensor signals. Key features include 13-bit resolution, 100 ksps sampling performance, four differential or eight single-ended input configurations, and low power consumption. The digital interface uses the industry-standard SPI protocol, allowing the converter to connect to microcontrollers, field-programmable gate arrays, and data loggers. Differential operation also supports the manufacturer's ±1 LSB maximum DNL specification and grade-dependent INL characteristics. The MCP3304 uses an internal sample-and-hold stage and a 13-bit successive-approximation core. Differential and single-ended multiplexing allows one converter to service several sensors, reducing component count in multi-channel systems. Low-power operation suits portable instruments where battery capacity and thermal performance are important. Typical applications include battery-powered environmental monitors, industrial process-control nodes, thermocouple and pressure-sensor interfaces, laboratory measurement equipment, and remote data-acquisition systems. The SPI interface simplifies connection to an embedded controller while the 16-lead SOIC package supports conventional surface-mount assembly. When laying out the circuit, place the input and reference components close to the converter, use a low-noise reference source, and route analog and digital return currents separately. Check the channel multiplexing and polarity settings in firmware because single-ended and differential conversions use different input relationships. Treat the unused analog pins according to the manufacturer's pin-description table when assigning PCB tracks.

طلب عرض سعر اتصل بنا
MCP3422A0-E/MS - 18-Bit, 2-Ch ADC | Microchip | Sensor
MCP3422A0-E/MS

MCP3422A0-E/MS - 18-Bit, 2-Ch ADC | Microchip | Sensor

The Microchip Technology MCP3422A0-E/MS is a two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, a 3.75 samples-per-second conversion rate, and an 8-pin MSOP package measuring 3 mm x 3 mm x 0.85 mm. It operates from 2.7 V to 5.5 V and features an onboard precision 2.048 V reference, allowing a nominal differential input range of ±2.048 V. A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time oversampling, noise shaping, and digital filtering to produce high-resolution conversion results. In the electronic-component hierarchy, this MCP3422 belongs to the ADC family, which sits within data-converter and signal-chain ICs. It is intended for low-frequency measurements where high resolution, differential input capability, and simple serial control are more important than rapid sampling. The MCP3422A0-E/MS provides up to 18 bits of resolution across two analog input channels. Differential inputs reduce sensitivity to common-mode noise when the measured signal is applied between an AIN+ and AIN- terminal. The precision 2.048 V internal reference simplifies ratiometric or direct measurement designs by removing the need for an external reference source. The 3.75 SPS rate supports slowly changing process, temperature, pressure, and bridge-sensor signals rather than waveform capture. Communication uses a two-wire I2C serial interface, which allows the converter to share pins with a host microcontroller or digital sensor hub. A nominal supply current of 145 µA supports low-power instrumentation, while the 2.7 V to 5.5 V operating range covers common 3.3 V and 5 V systems. The converter is designed for surface-mount assembly in compact industrial, medical, environmental, and precision measurement equipment. Typical uses include pressure-transducer monitoring, thermistor bridges, current-shunt measurements, laboratory instrumentation, and low-rate data acquisition. Differential excitation and reference-based scaling can improve immunity to ground offsets and supply ripple, although the selected input and conversion settings must remain within the ADC’s electrical limits. For layout, route analog inputs as short, guarded traces away from switching nodes and digital clock lines. Place the device close to its reference and decoupling network, use a quiet ground-plane arrangement, and provide input filtering appropriate to the source impedance. The slow conversion rate creates timing headroom but requires correct sampling and digital-filter configuration for stable measurements. This product page combines the manufacturer specifications, application-oriented design guidance, package and pin information, and same-footprint replacement analysis. It also explains the electrical trade-offs involved when selecting the MCP3422A0-E/MS for slow, high-resolution differential measurements.

طلب عرض سعر اتصل بنا
MCP3422A1-E/MS - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip
MCP3422A1-E/MS

MCP3422A1-E/MS - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip

The Microchip Technology MCP3422A1-E/MS is a two-channel, 18-bit delta-sigma analog-to-digital converter operating at up to 4 samples per second, with differential inputs and an 8-MSOP package. Its key specifications include 18-bit resolution, a 2.048 V internal reference, a 2.7 V to 5.5 V supply range, and a two-wire I2C-compatible serial interface. An ADC is a mixed-signal semiconductor that converts continuously varying analog voltages into digital codes for processing, measurement, storage, or control. The MCP3422 belongs to the delta-sigma ADC family within the broader ADC and data-conversion IC hierarchy. Delta-sigma conversion is especially useful when low noise, high effective resolution, and simple analog front ends are more important than very high conversion speed. The MCP3422A1-E/MS provides two differential input channels and converts analog inputs to digital codes with up to 18 bits of resolution. Its onboard precision 2.048 V reference establishes a differential input range of plus or minus 2.048 V. The device operates from a single 2.7 V to 5.5 V supply and supports standard, fast, and high-speed I2C-compatible modes, giving designers flexibility in bus speed and system partitioning. The converter's sigma-delta architecture is suited to slow-changing sensor signals rather than high-frequency waveform acquisition. At 4 samples per second, it prioritizes noise rejection and resolution for pressure, temperature, chemical, potentiometric, and bridge-based measurements. Its two-channel architecture allows paired or differential sensing while keeping the analog front end compact, and its MSOP-8 form factor supports space-constrained instrumentation. Typical applications include industrial process monitoring, portable sensor instrumentation, battery-powered measurement systems, laboratory data acquisition, and low-rate environmental sensing. Differential inputs are particularly useful when measuring small signals stacked on larger common-mode voltages or when reducing errors from ground offsets and coupled noise. Designers should place input filtering and protection close to the converter, route analog and digital signals carefully, and use suitable bypass capacitors around the supply pins. Because conversion is intentionally low-rate, the device should not be selected for sampling fast transients or wideband waveforms unless the complete signal chain can deliver the required bandwidth and conversion performance. This product record combines the manufacturer's converter specifications with package, sourcing, drop-in comparison, and design guidance for engineers evaluating the MCP3422A1-E/MS. It also highlights the practical distinction between low-noise precision conversion and high-speed data acquisition so the correct ADC architecture can be selected for the measurement task.

طلب عرض سعر اتصل بنا
MCP3422A1-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip
MCP3422A1-E/SN

MCP3422A1-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip

Microchip Technology MCP3422A1-E/SN is a two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, an integrated 2.048 V precision reference, and an I2C interface. The converter operates at 3.3 V or 5 V and is packaged in an 8-pin SOIC. Its differential input range is ±2.048 V when the internal reference is used, while its low-noise architecture targets accurate measurement of low-level analog signals. A delta-sigma ADC is an analog-to-digital converter category that uses oversampling and digital filtering to achieve high resolution and noise performance. The MCP3422 belongs to the broader hierarchy of data-converter ICs, analog-to-digital converters, and signal-chain semiconductors. Its two differential channels can reject common-mode noise when paired with suitable front-end circuitry, while the digital interface allows a microcontroller or embedded system to retrieve conversion results over I2C. The MCP3422 family provides up to 18 bits of resolution and includes a 2.048 V on-board reference. The A1-E/SN ordering configuration is identified by distributors as an 18-bit, dual-input, delta-sigma ADC in an 8-SOIC package. The operating temperature range extends from -40°C to +125°C, making the device suitable for industrial and automotive-oriented measurement systems when the individual qualification and regulatory requirements are satisfied for the assembled design. The MCP3422A1-E/SN converts at 3.75 samples per second, prioritizing conversion resolution and noise performance rather than high-speed waveform acquisition. Its differential inputs and integrated reference simplify instrumentation designs by reducing the need for an external low-noise reference and input-conditioning network. Applications include bridge excitation, pressure and force sensing, current measurement, battery monitoring, temperature measurement, and low-level industrial signal acquisition. For PCB implementation, use an 8-pin SOIC land pattern and follow the manufacturer pin-description table when assigning power, ground, analog inputs, and I2C signals. Keep analog input routing compact and place input filtering close to the converter. Provide stable supply decoupling and use pull-up resistors on the I2C bus in accordance with the interface voltage and bus capacitance. The principal design trade-off is conversion speed versus resolution. The MCP3422A1-E/SN is appropriate for slowly changing sensor signals where 18-bit precision is more valuable than rapid sampling. For waveforms requiring substantially faster acquisition, select a converter whose conversion rate and signal bandwidth match the measured phenomenon rather than treating resolution alone as the system requirement. This page combines manufacturer specifications, exact-ordering-code sourcing information, drop-in family alternatives, comparison parameters, and practical layout guidance. It also identifies the operating distinctions that matter when choosing a pin-compatible member of the MCP3422 family for precision sensor and industrial measurement designs.

طلب عرض سعر اتصل بنا
MCP3422A2-E/MS - 18-Bit Dual-Input ADC | Microchip
MCP3422A2-E/MS

MCP3422A2-E/MS - 18-Bit Dual-Input ADC | Microchip

The Microchip Technology MCP3422A2-E/MS is an 18-bit, dual-input, delta-sigma analog-to-digital converter with differential inputs, a programmable gain amplifier, and a sampling rate of 3.75 kSPS. It operates from 2.7 V to 5.5 V and is supplied in an 8-MSOP surface-mount package. The MCP3422 family is designed for precision measurement of low-frequency analog signals where noise performance, resolution, and integrated voltage reference accuracy are more important than conversion speed. An ADC is an analog-to-digital converter, a semiconductor that transforms a continuously varying voltage into a numeric code for processing by a microcontroller or other digital system. The MCP3422 belongs to the delta-sigma ADC class and the broader data-converter IC hierarchy. Its integrated 2.048 V reference supports a differential input range of plus or minus 2.048 V, while the programmable gain stage allows the converter to scale smaller sensor outputs into the available conversion range. Key specifications include 18-bit resolution, 2 differential inputs, a 3.75 kSPS conversion rate, a 2.7 V to 5.5 V supply range, and an integrated programmable gain amplifier. The low-noise architecture is suitable for bridge sensors, current measurements, potentiometer positions, temperature signals, and other slowly changing quantities. The 8-MSOP package supports compact PCB layouts without requiring a high pin count. The delta-sigma conversion architecture continuously samples and filters the input, trading conversion speed for high resolution and good noise performance. The device can be paired with an I2C-compatible host, allowing measured values to be transferred digitally rather than converted by a separate external ADC. Firmware must configure the gain, conversion timing, data rate, channel selection, and operating mode through the device registers. Typical uses include industrial process monitoring, laboratory instrumentation, battery-powered sensing, environmental measurement, and low-speed control loops. The 3.75 kSPS rate is appropriate for temperature, pressure, strain, and chemical-sensor outputs that change over seconds or minutes. It is not the preferred choice for high-bandwidth waveform capture, where a substantially faster SAR or other converter would be more appropriate. PCB implementation should keep analog input traces short, provide a quiet ground return, place input filtering close to the converter, and decouple the supply pins. Input filtering, common-mode range, source impedance, and reference accuracy must be evaluated together because each can influence the achievable code accuracy. The manufacturer MCP3422 product page and datasheet provide the authoritative pin descriptions, register map, and application guidance. This product record combines the manufacturer specifications with package, application, comparison, and replacement guidance. It also identifies the exact family variants that can be evaluated when a different gain setting, conversion-rate option, or package arrangement is required. Use the Request a Quote form on this page for current commercial availability, and confirm lifecycle and manufacturing status with Microchip Technology before committing a production design.

طلب عرض سعر اتصل بنا
MCP3422A4-E/MS - 18-Bit Dual-Input Sigma-Delta ADC
MCP3422A4-E/MS

MCP3422A4-E/MS - 18-Bit Dual-Input Sigma-Delta ADC

The Microchip Technology MCP3422A4-E/MS is an 18-bit, two-channel sigma-delta analog-to-digital converter with a conversion rate of 3.75 samples per second, a 2.048 V internal reference, differential inputs, and an I2C interface in an 8-pin MSOP package. Its operating supply range is 2.7 V to 5.5 V. An ADC is an analog-to-digital converter, a semiconductor that transforms continuously varying voltage signals into numerical values for processing, measurement, or control. The MCP3422 belongs to the delta-sigma ADC family, where an internal modulator and digital filter shape the conversion result. It also fits the broader hierarchy of data-converter ICs, signal-chain ICs, and semiconductor components used in precision instrumentation. The MCP3422A4-E/MS provides up to 18-bit resolution across two differential input channels. Its integrated 2.048 V reference supports a differential input range of plus or minus 2.048 V, while the I2C interface allows a host microcontroller to configure the converter and retrieve conversion results. A 3.75 SPS rate favors stable measurements over high-speed waveform capture, and the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V systems. The sigma-delta architecture emphasizes resolution, noise rejection, and effective performance for slowly changing or low-bandwidth signals. Differential input operation helps reject common-mode interference when a sensor is connected through balanced wiring. The internal reference reduces the number of external precision components, although reference accuracy, noise, and front-end design still determine the practical resolution of the complete measurement chain. Typical uses include pressure and temperature transducers, bridge sensors, industrial process monitoring, laboratory measurement equipment, and low-rate sensor acquisition. The dual differential channels allow one converter to service two related analog inputs. Its 18-bit code depth is useful when the signal-to-noise ratio of the sensor and analog front end is sufficient to justify the extra resolution. Design should begin with the input common-mode range, differential signal amplitude, and I2C bus requirements. Keep analog input traces short, use suitable filtering at the converter pins, and provide stable supply bypassing. Because this is a precision low-speed ADC, layout symmetry, connector cleanliness, reference grounding, and rejection of switching-node interference often matter more than raw processing speed. This product summary combines manufacturer specifications, package and sourcing details, compatible family references, comparison parameters, and implementation guidance to support component selection and PCB design. The result also distinguishes device functions, electrical limits, and replacement considerations so engineers can assess fit before committing the 8-MSOP footprint to a design.

طلب عرض سعر اتصل بنا
MCP3422A4-E/SN - 18-Bit Dual-Channel ADC | Microchip
MCP3422A4-E/SN

MCP3422A4-E/SN - 18-Bit Dual-Channel ADC | Microchip

The Microchip Technology MCP3422A4-E/SN is an 18-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, a 3.75 SPS conversion rate, and an 8-pin SOIC package. Its integrated 2.048 V precision reference supports a differential input range of ±2.048 V, while its two-wire I2C-compatible interface connects efficiently to embedded processors and sensors. An ADC converts an analog voltage into a digital code for measurement, control, logging, or signal processing. The MCP3422 belongs to the delta-sigma ADC, data converter IC, and analog-to-digital converter hierarchy. Delta-sigma architectures are especially useful when high resolution, low noise, and good rejection of slow analog disturbances are more important than very high conversion throughput. The principal features of the MCP3422 include two differential analog input channels, resolution up to 18 bits, an on-board 2.048 V reference, and operation from a single 2.7 V to 5.5 V supply. The A4 grade is associated with a 3.75 SPS conversion rate, making it suitable for continuous monitoring of slowly changing quantities such as temperature, pressure, load-cell output, and process-control signals. The MCP3422 family combines continuous or single-shot conversion operation with an I2C-compatible serial interface. Differential inputs help reject common-mode noise when the source is arranged around ground or another biased reference. Using the internal reference simplifies the external circuit, although the application must remain within the ±2.048 V differential input range unless suitable external circuitry limits the signal. Typical uses include industrial sensor acquisition, battery-powered environmental monitors, pressure and temperature instrumentation, precision weighing systems, and low-speed laboratory measurement equipment. Two input channels allow the converter to monitor either two independent sensor outputs or paired differential signals without requiring two separate converter packages. Design the input network so that source impedance, common-mode voltage, and ESD protection do not overload the analog inputs. Place input filtering and reference-decoupling components close to the device, maintain clean supply routing, and confirm the I2C pull-up voltage and bus capacitance against the selected operating supply. This product page combines manufacturer specifications, application guidance, package information, and verified same-package alternatives to support component selection and PCB planning. It also highlights the trade-offs between conversion rate, noise performance, channel count, and interface requirements for embedded measurement designs.

طلب عرض سعر اتصل بنا
MCP3422A5-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC
MCP3422A5-E/SN

MCP3422A5-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC

The Microchip Technology MCP3422A5-E/SN is an 18-bit, two-channel delta-sigma analog-to-digital converter with differential inputs, a 2.048 V on-board reference, and a 4 sps conversion rate, packaged in an 8-pin SOIC. It operates from a single 2.7 V to 5.5 V supply and communicates through a two-wire I²C-compatible serial interface. An ADC converts an analog voltage into a digital value for measurement, control, or data logging. The MCP3422 belongs to the delta-sigma ADC class, which uses continuous-time sampling and digital filtering to deliver high resolution and low noise. Within the signal-chain hierarchy, it sits between sensors or front-end circuits and a digital controller, combining an analog measurement function with an I²C interface. The two differential input channels support measurement of bipolar signals around the selected conversion gain. An on-board precision 2.048 V reference establishes the differential input range of ±2.048 V. Differential operation rejects common-mode voltage, while the 18-bit converter resolution supports high-resolution measurements in sensors, industrial controls, and instrumentation. The A5 variant is identified in product listings as a 4 sps delta-sigma ADC. The MCP3422 architecture integrates the converter, on-board reference, input channels, and digital control into one compact IC. Conversion data is transferred over the two-wire serial interface, reducing the number of connections required between the analog measurement section and a host controller. Its single-supply operation also simplifies systems that use either 3.3 V or 5 V logic and analog rails. Configuration and measurement sequencing are handled through the device command interface rather than separate programming pins. Typical uses include bridge or ratiometric sensor measurement, industrial process monitoring, low-frequency instrumentation, portable data acquisition, and embedded control systems with slow-changing analog inputs. The differential inputs are especially useful when the measured quantity appears as a small voltage superimposed on a larger common-mode voltage. The 4 sps conversion rate is appropriate for temperature, pressure, load, and position measurements rather than high-bandwidth waveform acquisition. Designers should apply input filtering and carefully observe the differential input range, because the 2.048 V reference also determines the usable signal span. Place input and reference components near the device, provide a clean supply connection, and route I²C signals away from sensitive analog inputs. Verify the conversion rate and digital timing against the required control-loop interval before fixing the system sampling schedule. This page combines manufacturer specifications, package information, pricing availability, selectable drop-in alternatives, and application-focused design guidance. It also provides practical context for choosing the A5 speed grade, planning the analog front end, and evaluating replacement options without changing the 8-pin SOIC footprint.

طلب عرض سعر اتصل بنا
MCP3423-E/MF - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip
MCP3423-E/MF

MCP3423-E/MF - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip

The Microchip Technology MCP3423-E/MF is an 18-bit, two-channel delta-sigma analog-to-digital converter with differential inputs, an I2C interface, and an integrated precision 2.048 V reference. It is offered in a 10-DFN 3x3 mm package and converts signals at up to 4 samples per second. The differential input range is ±2.048 V, while the programmable gain stage supports a 4.096 V full-scale range. These characteristics make the MCP3423-E/MF appropriate for precision instrumentation, industrial process measurement, and low-frequency sensor acquisition. A delta-sigma ADC is an analog-to-digital converter that uses oversampling, digital filtering, and noise shaping to produce high-resolution conversion results from low-frequency analog signals. It belongs to the ADC > analog-to-digital converter > data-converter IC > semiconductor hierarchy. Compared with flash and successive-approximation ADCs, this architecture is particularly effective when high resolution and good rejection of low-frequency noise matter more than very high sampling rates. The MCP3423-E/MF provides up to 18 bits of resolution across two analog input channels. Differential inputs support measurement of voltage differences, which is valuable when sensor outputs are referenced to a remote or noisy ground. The on-board 2.048 V precision reference establishes the converter's scale without requiring an external reference. Power-on reset and automatic calibration simplify initial system operation, while the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V systems. The converter uses a sigma-delta architecture and an I2C digital interface. Its 4 samples-per-second conversion capability is suitable for slowly changing industrial, environmental, and instrumentation signals rather than high-bandwidth waveform capture. The 10-DFN 3x3 mm package also reduces board footprint, although the exposed-pad construction and differential signal requirements demand careful layout and thermal design. Typical applications include 4-20 mA process-loop measurement, bridge-based pressure sensing, low-level voltage acquisition, environmental monitoring, and precision laboratory instrumentation. Differential excitation and conversion of the resulting small voltage difference can improve common-mode rejection. The 18-bit resolution is also useful when a sensor output represents only a small portion of the converter's differential input range. Designers should place input and reference-related connections for minimal signal-loop area, provide suitable bypass capacitance, and route the differential pair away from switching nodes. The package's compact thermal land pattern should be connected to the ground plane as directed by Microchip's package documentation. Because the verified product data identifies a 10-DFN package but does not provide its complete numbered pin map, the pinout is intentionally left null. This page combines verified manufacturer and distributor information with application guidance, purchasing context, and engineering-focused comparisons. It also distinguishes verified technical facts from attributes that still require confirmation from the complete Microchip datasheet before layout or production release.

طلب عرض سعر اتصل بنا
MCP3423-E/UN - 18-Bit Dual Delta-Sigma ADC | Microchip
MCP3423-E/UN

MCP3423-E/UN - 18-Bit Dual Delta-Sigma ADC | Microchip

The Microchip Technology MCP3423-E/UN is a two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, an I2C interface, and an integrated 2.048 V precision reference in a 10-MSOP package. The device supports input ranges up to ±2.048 V differentially and is specified in distributor listings for operation at up to 4 samples per second. An ADC is an analog-to-digital converter, a semiconductor that converts continuous voltage signals into digital codes for processing, measurement, logging, or control. The MCP3423 belongs to the delta-sigma ADC hierarchy, where an internal modulator and digital filtering provide high resolution and low noise at relatively low conversion rates. It is therefore suited to precision measurements rather than high-speed waveform capture. Key features include two analog input channels, up to 18-bit resolution, differential input capability, an on-board 2.048 V reference, and an I2C digital interface. The 2.048 V reference establishes the differential input scale for each conversion, while the dual-channel architecture allows related measurements to be captured without changing the converter package. The 10-MSOP format supports compact, surface-mount instrumentation designs. Technically, the MCP3423 combines a delta-sigma conversion stage with on-chip noise rejection and digital decimation. Low-rate conversion allows the converter to reject out-of-band noise effectively, while the integrated reference reduces the number of external precision components required. The I2C interface provides a compact connection to microcontrollers, sensors, data loggers, and industrial measurement equipment, although the maximum bus and interface timing details require confirmation from the manufacturer datasheet. Typical uses include bridge or load-cell signal acquisition, industrial process monitoring, low-frequency sensor measurement, laboratory instrumentation, and portable data acquisition. Differential inputs are particularly useful when the measured signal is small and a differential amplifier or low-level front end converts it into the converter's allowed input range. The device is not positioned as a high-speed SAR ADC because its listed conversion rate is approximately 4 SPS. Designers should verify analog input common-mode limits, reference accuracy, supply requirements, digital interface timing, and the required gain configuration against the manufacturer datasheet before layout. Input filtering and source impedance remain important because the selected conversion rate and digital filter determine the usable bandwidth; filtering too aggressively can delay settling, while insufficient filtering can admit unwanted out-of-band noise. This product page consolidates verified manufacturer and distributor information, pricing, package details, design guidance, and the available drop-in cross-reference. It is intended to help engineers identify the correct MCP3423-E/UN variant and distinguish a genuine same-package replacement from a merely similar converter.

طلب عرض سعر اتصل بنا
MCP3423T-E/MF - 18-Bit Dual-Channel Sigma-Delta ADC | Microchip
MCP3423T-E/MF

MCP3423T-E/MF - 18-Bit Dual-Channel Sigma-Delta ADC | Microchip

The Microchip Technology MCP3423T-E/MF is an 18-bit, dual-channel sigma-delta analog-to-digital converter with differential inputs, an on-board 2.048 V reference, and an I2C serial interface in a 10-pin 3 x 3 mm DFN package. It supports differential input ranges of ±2.048 V and conversion rates up to 3.75 samples per second. A sigma-delta ADC is a class of analog-to-digital converter that uses continuous-time delta-sigma modulation and digital filtering to convert analog voltages into high-resolution digital codes. It belongs to the ADC and DAC category within data-converter ICs and is used when low noise, good linearity, and precise measurement matter more than very high conversion speed. The MCP3423 provides two differential measurement channels and up to 18 bits of resolution. Its internal 2.048 V reference simplifies system design by removing the need for an external precision reference in common bipolar-input applications. The two-wire I2C interface reduces the number of required signal lines, while 3.75 SPS conversion capability is suited to slow-changing industrial, environmental, and instrumentation signals. Its delta-sigma architecture inherently shapes quantization noise toward lower frequencies, helping reject broadband noise when the analog signal bandwidth is limited. The on-board reference and differential inputs are particularly useful for sensor bridges, pressure transducers, current measurements, and low-level instrumentation. Because the converter averages successive samples through digital filtering, input settling and filter behavior must be considered when measuring rapidly changing signals. Typical uses include industrial process monitoring, precision temperature measurement, bridge-sensor acquisition, laboratory instrumentation, and low-speed data-acquisition systems. The 3 x 3 mm DFN package supports compact designs but requires careful PCB layout, exposed-pad soldering, and low-noise routing. The MCP3423T-E/MF is packaged on tape and reel for automated manufacturing. For best results, use suitable filtering at each analog input, keep the I2C traces short, provide clean supply and ground connections, and follow the manufacturer datasheet's exposed-pad land pattern. Differential input measurements also require attention to common-mode voltage, source impedance, and conversion timing when calculating measurement uncertainty. This page combines the manufacturer's core device characteristics with practical analog-layout guidance, application analysis, and same-package replacement information. It highlights where the 18-bit resolution, differential architecture, 2.048 V reference, and 3.75 SPS rate make the MCP3423T-E/MF an effective precision-measurement ADC rather than a high-speed data-conversion solution.

طلب عرض سعر اتصل بنا
MCP3423T-E/UN - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip Technology
MCP3423T-E/UN

MCP3423T-E/UN - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip Technology

The Microchip Technology MCP3423T-E/UN is an 18-bit, dual-channel, low-noise delta-sigma analog-to-digital converter with differential inputs, an onboard 2.048 V precision reference, and an I²C-compatible serial interface. The device is specified for 3.3 V and 5 V operation and uses a 10-pin MSOP surface-mount package. Its two differential input channels provide flexible measurement of bipolar sensor signals while the onboard reference simplifies system design by removing the need for an external reference source. The MCP3423 is part of the MCP342X family of delta-sigma ADCs designed for precision signal acquisition. A delta-sigma ADC converts an analog input by oversampling and digital filtering, which is useful when the application requires high resolution and good noise performance at relatively low conversion rates. The MCP3423 supports up to 18 bits of resolution and conversion rates up to 240 SPS, according to the manufacturer product information. Key features include two differential channels, a 2.048 V onboard reference, automatic calibration, power-on reset, and a two-wire I²C-compatible interface. The differential input architecture helps reject common-mode noise when measuring low-level sensor outputs. The internal reference establishes a nominal differential input range of ±2.048 V, while the converter's low-noise architecture is intended for applications requiring accurate measurement of slowly changing analog quantities. The device uses an I²C-compatible serial interface to transfer conversion results to a microcontroller or other digital controller. Configuration registers control the conversion cycle, input channel selection, gain, and operating mode. Because the converter is designed for low-rate precision measurement rather than high-speed waveform capture, its conversion timing should be considered in applications where latency or dynamic signal bandwidth is important. Typical applications include pressure and temperature sensor interfaces, current sensing, bridge-transducer measurement, industrial process monitoring, and low-rate instrumentation. Differential inputs are particularly useful with resistive sensors whose outputs are referenced around a common midpoint. The internal reference is advantageous in compact systems where space, component count, and calibration complexity are constrained. When laying out the circuit, route the analog inputs away from digital switching nodes and keep the input connections short. The supply and ground pins require effective bypassing close to the device, and the exposed-pad or thermal considerations should follow the package-specific land pattern in the manufacturer datasheet. Verify the conversion time, gain, reference configuration, and I²C address before finalizing the firmware. This page also organizes the device specifications, replacement considerations, and application guidance for faster engineering evaluation.

طلب عرض سعر اتصل بنا
MCP3424-E/SL - 18-Bit 4-Channel Delta-Sigma ADC | Microchip
MCP3424-E/SL

MCP3424-E/SL - 18-Bit 4-Channel Delta-Sigma ADC | Microchip

Microchip Technology MCP3424-E/SL is an 18-bit, four-channel delta-sigma analog-to-digital converter with differential inputs, an onboard 2.048 V precision reference, and a 14-pin SOIC package. According to the manufacturer product page, the differential input range is ±2.048 V when the internal reference is used. The converter is intended for low-noise, high-accuracy measurement systems in which several analog channels must be digitized through a serial interface. An ADC is a mixed-signal integrated circuit that converts continuous analog voltage into a digital code. The MCP3424 belongs to the delta-sigma ADC category, which uses noise shaping and digital filtering to obtain high resolution from relatively slow conversion rates. It sits within the broader semiconductor hierarchy as an ADC, data-converter IC, analog-to-digital converter, and signal-acquisition component. Its four-channel architecture is useful when monitoring several differential sensors or precision analog front ends. The MCP3424-E/SL provides up to 18 bits of resolution and supports four analog input channels. Its low-noise, high-accuracy delta-sigma architecture is suited to instrumentation where small voltage changes must be measured reliably. The onboard 2.048 V reference provides a defined differential measurement range of ±2.048 V without requiring an external reference source. The 14-pin SOIC package also supports conventional surface-mount PCB assembly. MCP3424 devices use a continuous or single-conversion delta-sigma architecture intended for precision rather than high-speed waveform capture. The verified distributor listing identifies the MCP3424 family as a 1 sigma-delta converter, while another listing identifies a 3.75 SPS operating rate. Conversion speed, noise performance, input impedance, digital interface details, supply requirements, and absolute maximum ratings should be confirmed against the manufacturer datasheet before final design release. Typical measurement uses include bridge or differential sensor instrumentation, industrial process monitoring, laboratory data acquisition, low-frequency precision acquisition, and multi-channel embedded measurement. In each case, the converter can digitize more than one analog input while preserving a compact package. System designers should account for the input settling behavior and digital filtering delay when planning sample timing or synchronizing the conversion result with external sensors. A key design consideration is the relationship between the selected reference and the analog input range. With the internal 2.048 V reference, the verified differential range is ±2.048 V. A PCB design should preserve signal integrity at the analog inputs, provide a low-noise analog ground path, and account for the converter's serial communication requirements. An external reference or additional filtering should be used only after its range, accuracy, and noise implications have been verified from the manufacturer datasheet. This product record combines verified manufacturer and distributor information with practical selection guidance, application context, and an explicit distinction between confirmed specifications and data still required for design-in. It also documents that no additional pin-to-pin drop-in alternatives were established by the supplied cross-reference evidence, avoiding unsupported replacement claims.

طلب عرض سعر اتصل بنا
MCP3424-E/ST - 18-Bit Quad-Channel Delta-Sigma ADC | Microchip Technology
MCP3424-E/ST

MCP3424-E/ST - 18-Bit Quad-Channel Delta-Sigma ADC | Microchip Technology

Microchip Technology MCP3424-E/ST is an 18-bit, four-channel delta-sigma analog-to-digital converter with differential inputs, an integrated precision 2.048 V reference, and a two-wire I2C-compatible serial interface. The device is supplied in a 14-TSSOP package and operates from a single supply voltage ranging from 2.7 V to 5.5 V. Its low-noise, high-accuracy architecture is intended for measurement systems that require more than 16-bit resolution but can tolerate a conversion rate of approximately 3.75 samples per second. A delta-sigma ADC is a sigma-delta analog-to-digital converter that uses oversampling, noise shaping, and digital filtering to convert a differential analog input into a high-resolution digital code. In the signal-chain hierarchy, the MCP3424-E/ST is an ADC, specifically a low-frequency precision delta-sigma ADC within the broader data-converter and semiconductor categories. Its differential input architecture helps reject common-mode noise when paired with suitable sensor and instrumentation amplifiers. The MCP3424 family provides up to 18-bit resolution, four input channels, a low-noise architecture, and an onboard 2.048 V precision reference that enables a differential input range of ±2.048 V according to the manufacturer product information. The I2C-compatible interface allows the converter to connect efficiently to embedded controllers while consuming relatively few external pins. The 14-TSSOP package also makes the device suitable for compact instrumentation equipment. Typical uses include pressure and temperature acquisition, industrial process monitoring, laboratory measurement, portable instrumentation, and sensor interfaces where low-frequency measurements are more important than high conversion speed. The differential inputs and integrated reference help simplify analog front-end design while preserving measurement resolution. The 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V systems. When designing around the MCP3424-E/ST, confirm the analog input range, common-mode limits, reference configuration, digital interface voltage, and conversion timing against the manufacturer datasheet. Place input filtering and decoupling close to the device, and account for the 3.75 SPS conversion rate when defining sample timing. This page combines verified distributor information, manufacturer details, package information, practical application guidance, and clearly qualified replacement options.

طلب عرض سعر اتصل بنا
MCP3426A0-E/MC - 16-Bit Dual-Channel ADC | Microchip Technology
MCP3426A0-E/MC

MCP3426A0-E/MC - 16-Bit Dual-Channel ADC | Microchip Technology

Microchip Technology MCP3426A0-E/MC is a 16-bit, dual-channel, low-noise delta-sigma analog-to-digital converter with differential inputs, 15 samples per second, and an 8-lead DFN package measuring 2 x 3 mm. It includes an onboard precision 2.048 V reference, supports a differential input range of ±2.048 V, and uses a two-wire I2C-compatible serial interface. A delta-sigma ADC is a voltage-to-digital conversion IC that averages successive samples and applies digital filtering to produce a high-resolution result from low-frequency analog signals. The MCP3426 belongs to the broader hierarchy of data-converter ICs, analog-to-digital converters, signal-chain semiconductors, and general-purpose mixed-signal devices. Its differential architecture is especially useful when the source has a small differential signal riding on a larger common-mode voltage. The device provides up to 16 bits of resolution, two differential input channels, a 2.048 V internal reference, and an I2C-compatible interface. The A0 device designation identifies the specific gain and conversion-timing configuration within the MCP3426 family. Operation from a single supply of 2.7 V to 5.5 V allows the converter to operate from common 3.3 V and 5 V systems. The low-noise conversion architecture is appropriate for precision measurement rather than high-speed waveform acquisition. Delta-sigma conversion favors low-frequency signals because its digital filter improves noise performance but limits effective sampling bandwidth. The MCP3426 family is designed around continuous conversion, where internal oversampling and filtering determine output speed and noise. Differential inputs reduce sensitivity to common-mode disturbances when the source impedance at both inputs is closely matched. The internal reference simplifies ratiometric or absolute measurements by removing the need for an external reference circuit in many applications. Typical uses include current sensing, temperature measurement, bridge-transducer instrumentation, pressure monitoring, and low-level voltage acquisition. The onboard reference and differential inputs are particularly useful when a sensor produces a small voltage across a shunt or bridge. Because the MCP3426 is not intended for high-frequency signal capture, applications requiring kilohertz or megahertz bandwidth should use a faster converter architecture. For PCB implementation, place input, reference, and bypass capacitors close to their associated pins and route the two differential inputs as a compact, balanced pair. Keep the exposed pad connected to the ground plane and follow the manufacturer’s land-pattern and thermal-via guidance. Confirm the programmed conversion rate, gain, and output-code interpretation against the MCP3426/7/8 datasheet before scaling the analog input. This product page combines the manufacturer’s electrical specifications, package and interface details, family-level alternatives, and practical design guidance. It also distinguishes the MCP3426A0-E/MC from conversions that use different package formats or faster ADC architectures, helping engineers confirm drop-in suitability before redesigning an analog measurement board.

طلب عرض سعر اتصل بنا
MCP3426A0-E/MS - 16-Bit Dual-Channel ADC | Microchip Technology
MCP3426A0-E/MS

MCP3426A0-E/MS - 16-Bit Dual-Channel ADC | Microchip Technology

The Microchip Technology MCP3426A0-E/MS is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, an I2C interface, and an 8-pin MSOP package. It supports conversion rates up to 15 samples per second and includes an onboard 2.048 V precision reference, enabling a differential input range of ±2.048 V. The device operates across the -40°C to +125°C temperature range. A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling and digital filtering to achieve high resolution from low-noise sensor signals. It belongs to the data-converter IC hierarchy alongside SAR and pipelined converters. Compared with a successive-approximation-register ADC, the MCP3426 architecture is especially useful when low-noise measurement, averaging, and limited conversion speed are more important than rapid transient capture. The MCP3426 provides two differential input channels, 16-bit resolution, and conversion rates up to 15 SPS. Its integrated 2.048 V reference reduces external reference circuitry and supports a stated differential range of ±2.048 V. The I2C interface supports digital communication with a microcontroller, embedded controller, or data-acquisition system, while the 8-pin MSOP package supports compact surface-mount designs. The conversion speed of 15 SPS makes this converter appropriate for slowly changing measurements rather than high-frequency waveform sampling. Its delta-sigma filtering can suppress out-of-band noise, but the analog inputs must still be conditioned to prevent overload, settling errors, or common-mode voltage from exceeding the device limits. Differential operation helps reject common-mode interference when the source is arranged around a biased midpoint. Typical uses include battery-cell monitoring, pressure and temperature measurement, industrial process instrumentation, environmental sensors, portable instrumentation, and low-rate data acquisition. Differential inputs are particularly useful for bridge sensors and current-sense systems where signal polarity may change around zero and rejecting common-mode noise improves measurement integrity. Careful layout is essential for precision conversion. Keep analog input traces short, connect the reference and ground pins according to the manufacturer pin-description and layout guidance, and place input filtering capacitors close to their associated pins. Confirm the external I2C pull-up values and the programmed gain, conversion rate, and I2C address before production release. This product summary combines the manufacturer's device description, distributor package and feature data, pin-compatible family options, and practical design guidance. It also distinguishes confirmed operating facts from parameters that require engineering review against the full manufacturer datasheet.

طلب عرض سعر اتصل بنا
MCP3426A0-E/SN - 16-Bit Dual-Channel ADC | Microchip
MCP3426A0-E/SN

MCP3426A0-E/SN - 16-Bit Dual-Channel ADC | Microchip

The Microchip Technology MCP3426A0-E/SN is a 16-bit, two-channel, delta-sigma analog-to-digital converter with differential inputs, a 2.048 V internal precision reference, and a 15 SPS conversion rate, packaged in an 8-pin SOIC. It operates from a single 2.7 V to 5.5 V supply and communicates through a two-wire I2C-compatible serial interface. An ADC is a data-acquisition IC that converts continuously varying analog voltages into digital values for measurement, control, or display. The MCP3426 belongs to the delta-sigma ADC family within the broader data-converter and signal-processing hierarchy. Its differential architecture measures the voltage difference between two inputs rather than referencing a single node to ground, which helps reject common-mode noise when sensors and measurement circuitry share an analog environment. The principal features are 16-bit conversion resolution, two differential input channels, a precision 2.048 V onboard reference, and a differential input range of plus or minus 2.048 V. These characteristics suit low-frequency measurements requiring stable readings rather than high-speed waveform capture. The I2C-compatible interface also reduces the number of signal lines needed when the converter shares a control bus with other microcontrollers or embedded systems. The delta-sigma architecture incorporates noise shaping to move quantization noise away from the lower-frequency portion of the measurement bandwidth. The onboard reference establishes the converter's voltage scale, while differential inputs can support sensor bridges, current-shunt measurements, and other signals whose useful information is represented as the difference between two nodes. The device is identified as an automotive AEC-Q100 part in distributor technical listings, making the temperature-qualified option relevant to vehicle and other demanding industrial environments. Typical uses include industrial process monitoring, environmental sensors, strain-gauge and bridge-based measurements, current sensing, laboratory instrumentation, and low-speed data acquisition. It is less appropriate for audio-band waveform sampling, motor-control feedback loops, or other applications that require conversions faster than the specified 15 SPS rate. Firmware must also allow sufficient settling time between requested conversions when sequential measurements are used. PCB layout should keep the analog inputs short, isolate them from switching-node currents, and follow the pin-description table in the manufacturer datasheet when assigning tracks. The I2C pull-up resistors should be sized for the bus voltage and total capacitance rather than the logic voltage alone. Differential input routing with closely matched geometry improves rejection of externally coupled noise and helps preserve the converter's full measurement performance.

طلب عرض سعر اتصل بنا
MCP3426A0T-E/SN - 16-Bit Delta-Sigma ADC, Dual Ch, 15SPS | Microchip
MCP3426A0T-E/SN

MCP3426A0T-E/SN - 16-Bit Delta-Sigma ADC, Dual Ch, 15SPS | Microchip

The Microchip Technology MCP3426A0T-E/SN is a 16-bit, dual-channel, low-noise delta-sigma analog-to-digital converter with differential inputs, an on-board 2.048 V precision reference, and an I2C (two-wire) interface, supplied in an 8-pin SOIC package. According to the MCP3426/7/8 datasheet (Microchip document 22226A), the device provides a maximum output sample rate of 15 SPS at 16-bit resolution, an input range of ±2.048 V differentially, and operates from a single 2.7 V to 5.5 V supply. The 'A0' suffix denotes the fixed I2C address option and the 'T' indicates Tape and Reel packaging. A delta-sigma ADC (also written ΔΣ or sigma-delta ADC) is a type of oversampling converter that uses a modulator and digital filtering to achieve high resolution and excellent noise rejection, especially at low bandwidths. Within the broader signal-chain hierarchy, the MCP3426 belongs to the data-acquisition IC category -> analog-to-digital converter -> precision delta-sigma ADC -> low-power sensor ADC. Its on-chip reference and PGA eliminate most external components, simplifying designs that previously required a standalone ADC plus an external voltage reference. Key features include a programmable gain amplifier (PGA) with gains of 1, 2, 4, or 8, an internal 2.048 V reference with ±0.05% typical initial accuracy, 16-bit noise-free resolution, an I2C interface with user-configurable addresses, and an operating current of approximately 145 µA at 3 V during continuous conversion. The on-chip calibration register supports offset and gain self-calibration, which is useful for ratiometric measurements and sensor drift compensation. The architecture uses a second-order charge-balancing modulator and an SINC1 digital filter, which trades off settling time against noise. At the lowest data rate of 15 SPS the device achieves true 16-bit noise-free performance, while at the highest 240 SPS rate it switches to 12-bit effective resolution, making it well suited to multi-rate acquisition strategies. Typical applications include direct digitization of thermocouples, RTDs, bridge pressure sensors, strain gauges, and battery-cell voltage monitors. The differential ±2.048 V input range accommodates most low-voltage analog sensors without additional signal conditioning. When designing with the MCP3426, the I2C pull-up resistors must be sized correctly for the selected VDD and bus speed, and an external 0.1 µF decoupling capacitor placed close to the VDD pin is mandatory. Designers should also remember that the same address option 'A0' cannot co-exist on a single I2C bus with another A0 device; the A1, A2, or A3 address options must be selected for multi-channel systems. This page synthesizes distributor pricing, drop-in alternatives drawn from the same MCP3426 family, and practical design notes that go beyond the manufacturer datasheet's typical-application section.

طلب عرض سعر اتصل بنا
MCP3426A1-E/MC - 16-Bit Dual-Channel ADC | Microchip
MCP3426A1-E/MC

MCP3426A1-E/MC - 16-Bit Dual-Channel ADC | Microchip

The Microchip MCP3426A1-E/MC is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, up to 240 samples per second, an on-board 2.048 V reference, and an 8-DFN 2 x 3 mm package. It uses a two-wire I2C interface for digital communication and supports analog measurement of two independent input pairs. The converter architecture is intended for low-noise, high-accuracy signal acquisition where compactness and low power are important. A delta-sigma ADC is a type of analog-to-digital converter that oversamples and digitally filters its input before conversion. Within the ADC hierarchy, it belongs to the delta-sigma modulator and digital-decimation-filter architecture. The MCP3426A1-E/MC combines this conversion technique with an integrated precision reference and differential input architecture, making it suitable for sensors, industrial measurement systems, and low-level analog front ends. The device provides up to 16 bits of resolution, two analog input channels, and a differential input range of ±2.048 V when referenced to the internal 2.048 V source. Its 240 SPS conversion rate supports continuous monitoring without the data rate associated with high-speed flash ADCs. The I2C interface reduces the required connection count compared with parallel converters, while the 8-DFN package supports compact, surface-mount PCB layouts. Microchip describes the MCP3426 as a low-noise, high-accuracy converter family that combines differential analog inputs with an on-board precision reference. Differential operation rejects common-mode voltage and can improve measurement accuracy when the source is balanced around the converter’s common-mode voltage. The internal reference establishes a fixed, predictable conversion scale, reducing the number of external precision components required for basic bridge, sensor, and process-control measurements. Typical uses include industrial pressure and temperature acquisition, current-shunt measurement, potentiometer and bridge-sensor conditioning, laboratory instrumentation, and low-frequency environmental monitoring. Differential inputs are particularly useful when the measured signal is small relative to the common-mode voltage. The 240 SPS rate is appropriate for changing process variables rather than high-bandwidth waveform capture. For reliable operation, route analog inputs away from switching nodes, use a quiet ground reference, and follow the manufacturer’s recommended input and bypass-capacitor connections. Differential pairs should be routed with consistent geometry and geometry to minimize conversion error. The 8-DFN exposed pad also requires the recommended PCB land pattern and thermal-via arrangement to avoid assembly and thermal problems. This page combines the manufacturer’s converter specifications with package guidance, application-focused design notes, and a comparison of same-family address variants. It helps engineers evaluate interface compatibility, analog range, conversion rate, and replacement options before committing a compact two-channel measurement design to PCB fabrication.

طلب عرض سعر اتصل بنا
MCP3426A1-E/MS - 16-Bit Dual-Channel Delta-Sigma ADC | Microchip
MCP3426A1-E/MS

MCP3426A1-E/MS - 16-Bit Dual-Channel Delta-Sigma ADC | Microchip

The Microchip Technology MCP3426A1-E/MS is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, 15 SPS conversion performance, and an 8-pin MSOP package. It operates from 2.7 V to 5.5 V and includes an onboard precision 2.048 V reference, making it suitable for low-level differential sensor measurements and industrial instrumentation. A delta-sigma ADC is a sigma-delta analog-to-digital converter that uses oversampling and digital filtering to provide high resolution and excellent noise performance. The MCP3426A1 belongs to the broader ADC → data converter → analog signal-processing IC hierarchy and is designed for measurements where low noise, differential input handling, and relatively low conversion rates are more important than very high throughput. Key features include 16-bit resolution, two differential input channels, single-supply operation from 2.7 V to 5.5 V, and conversion rates up to 15 SPS. The integrated 2.048 V reference supports a differential input range of ±2.048 V. The device is packaged in an 8-pin MSOP, and the automotive-grade ordering code identifies the temperature-grade and qualification option associated with the manufacturer’s device family. The MCP3426 architecture converts analog differential voltages through a delta-sigma modulator followed by digital filtering. This filtering averages noise over the measurement bandwidth and rejects periodic interference more effectively than many successive-approximation converters. The trade-off is conversion latency and reduced throughput, which make the device most appropriate for temperature, pressure, strain-gauge, current, and slowly changing industrial signals rather than waveform or motion acquisition. Typical applications include bridge-based pressure and load-cell measurements, low-voltage current sensing, thermocouple and RTD conditioning, battery monitoring, and industrial process-control inputs. In each case, the differential inputs help reject common-mode noise when the sensor is connected through wiring that may pick up unwanted voltage. The 16-bit resolution improves the representation of small sensor outputs without requiring a faster converter. For PCB implementation, keep the analog input traces short and route them away from switching power nodes and digital control lines. Use a clean, low-noise reference and adequate decoupling close to the supply pins. Because differential-input signal integrity depends on matched routing and filtering, the input source impedance and the acquisition timing should be checked against the manufacturer’s guidance before choosing external input networks. This page combines the MCP3426A1-E/MS specifications with practical ADC design guidance, application-oriented interpretation, and same-package upgrade options. It is intended to help engineers evaluate the converter’s resolution, bandwidth, reference, supply range, package, and migration options before releasing a design.

طلب عرض سعر اتصل بنا
MCP3426A1-E/SN - 16-Bit Dual-Channel ADC | Microchip
MCP3426A1-E/SN

MCP3426A1-E/SN - 16-Bit Dual-Channel ADC | Microchip

Microchip Technology MCP3426A1-E/SN is a two-channel, 16-bit delta-sigma analog-to-digital converter with differential inputs, an operating supply range of 2.7 V to 5.5 V, a conversion rate of 15 samples per second, and an 8-pin SOIC package. Its integrated precision reference is 2.048 V, supporting a differential input range of ±2.048 V. A delta-sigma analog-to-digital converter is an ADC category that uses delta-sigma modulation and digital filtering to convert analog voltage into high-resolution digital codes. The MCP3426 belongs to the ADC → delta-sigma ADC → data-converter IC hierarchy. It is designed for precision measurement systems where differential inputs, low noise, accurate conversion, and a simple I2C interface are more important than very high sampling speed. Key features include two differential analog input channels, resolution of up to 16 bits, and a 15 Hz conversion rate. The integrated 2.048 V reference removes the need for an external reference source, while the differential inputs help reject common-mode noise when sensing small signals. The device operates from 2.7 V to 5.5 V and communicates through I2C, making it suitable for embedded measurement systems with a microcontroller or sensor hub. The MCP3426 family combines a low-noise, high-accuracy delta-sigma conversion stage with an internal precision reference and programmable conversion and gain behavior. The A1 device variant uses a factory-programmed I2C address, allowing deterministic bus addressing without external address straps. Differential input architecture also supports ratiometric or referenced sensor measurements when both input nodes are driven from the same excitation source. Typical uses include industrial process measurement, battery-powered environmental sensing, strain-gauge instrumentation, pressure-sensor interfaces, and low-speed data acquisition. Its 15 Hz conversion rate is well suited to slowly changing physical variables rather than waveform capture or high-bandwidth communications. The two channels can also be configured for single-ended operation when the application does not require a fully differential signal path. For PCB design, keep analog input traces short and place the input bypass components close to their associated pins. Provide clean return paths beneath the analog section and isolate the I2C routing from sensitive input nodes. The ADC must also be evaluated for gain, common-mode range, input filtering, reference accuracy, and system noise before the conversion output is interpreted as a precision measurement.

طلب عرض سعر اتصل بنا
MCP3426A2-E/MS - 16-Bit Dual-Channel Sigma-Delta ADC
MCP3426A2-E/MS

MCP3426A2-E/MS - 16-Bit Dual-Channel Sigma-Delta ADC

The Microchip Technology MCP3426A2-E/MS is a 16-bit, dual-channel, sigma-delta analog-to-digital converter with differential inputs, up to 15 samples per second, and an 8-MSOP package. It uses an onboard precision 2.048 V reference to provide a differential input range of ±2.048 V. The converter is designed for low-noise, high-accuracy measurement of relatively slow analog signals. An ADC converts continuous analog voltage into a numerical value for processing, storage, or control. The MCP3426 belongs to the sigma-delta ADC category, where an internal modulator and digital filter shape the conversion process to provide strong noise rejection and high resolution without requiring a high-speed flash converter. Within the component hierarchy, it is a data-converter IC, an ADC, and a power-management-compatible peripheral for precision measurement systems. The MCP3426 combines two differential input channels, 16-bit resolution, and a factory-programmed I2C address in a compact 8-MSOP package. Differential inputs help reject common-mode disturbance when the measured voltage is small relative to the reference or supply level. The 2.048 V precision reference establishes the conversion scale, while the dual-channel architecture supports measurements from two sensors without changing converter hardware. Its sigma-delta architecture is most effective with low-frequency or slowly changing signals because the conversion rate is limited to 15 samples per second. Digital filtering suppresses broadband noise but requires suitable sampling and settling behavior in the acquisition chain. The converter resolves its programmed gain, reference, and conversion settings through an I2C-compatible interface, allowing firmware to configure measurement channels and retrieve conversion results. Typical uses include battery-powered environmental monitoring, industrial pressure and temperature acquisition, laboratory instrumentation, and low-speed sensor interfaces. Two differential channels are useful when both the sensor output and its return or reference signal must be measured accurately. The part is also appropriate for portable equipment where low conversion speed is acceptable but resolution and noise performance are more important than high throughput. PCB design should place input filtering and reference-decoupling components close to the associated pins, while keeping sensitive analog traces away from digital switching nodes. Differential routing should be compact and symmetric where practical. Designers should confirm the actual input range, gain configuration, acquisition timing, and absolute maximum conditions in the manufacturer datasheet before setting the analog front end. This page combines the core MCP3426 electrical characteristics, verified package information, same-footprint address-option alternatives, application guidance, and design considerations into a procurement-oriented engineering reference. It also distinguishes true drop-in options from cross-package converters so that footprint and firmware changes are considered before redesign.

طلب عرض سعر اتصل بنا
MCP3426A2-E/SN - 16-Bit Dual-Channel ADC | Microchip
MCP3426A2-E/SN

MCP3426A2-E/SN - 16-Bit Dual-Channel ADC | Microchip

Microchip Technology MCP3426A2-E/SN is a 16-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, up to 15 samples per second, and an 8-pin SOIC package. It includes an onboard 2.048 V precision reference, allowing a differential input range of ±2.048 V. The A2 gain configuration provides useful sensitivity for low-level differential signals while retaining the resolution and noise performance associated with the MCP3426 family. A delta-sigma ADC is an analog-to-digital converter category that uses continuous-time delta-sigma modulation and digital filtering to produce high-resolution conversion results. Within the semiconductor hierarchy, the MCP3426A2-E/SN is an ADC, then a data-converter IC, then an integrated circuit and semiconductor. Its internal reference, differential input architecture, and I2C-oriented interface make it suitable for sensors and measurement systems where analog signals must be converted into digital data for processing by a microcontroller or embedded controller. The converter offers up to 16-bit resolution, two differential input channels, and conversion rates up to 15 SPS. Its differential input arrangement helps reject common-mode noise when the sensor and analog front end share a suitable ground reference. The internal 2.048 V reference reduces the number of external precision components required, while the gain selection determines the effective full-scale input range. The -40°C to +125°C operating range supports industrial, instrumentation, and automotive-oriented equipment. The MCP3426 belongs to the low-noise, high-accuracy MCP342X converter family, which includes the MCP3426, MCP3427, and MCP3428. MCP3426 is the two-channel member, while MCP3427 and MCP3428 provide one- and four-channel configurations respectively. The MCP3426 family combines a delta-sigma conversion core with an onboard reference and serial digital interface, making it practical for current monitoring, bridge-sensor measurement, portable instrumentation, and low-rate precision data acquisition. Typical uses include battery-cell monitoring, industrial pressure and temperature acquisition, potentiometer and sensor interfaces, and low-frequency process-control measurements. Differential inputs suit Wheatstone-bridge sensors because the converter measures the small voltage between two sensor terminals rather than the larger common-mode voltage. The 15 SPS maximum rate is suitable for slow-changing measurements rather than high-speed waveform acquisition. Design the analog input network so that common-mode voltage and differential signal amplitude remain inside the converter's operating limits. Place input filtering and protection components close to the corresponding pins, maintain a low-noise ground path, and decouple the supply close to VDD. When replacing an earlier gain option, verify the selected full-scale range, input impedance, and noise behavior against the source impedance rather than relying only on package compatibility. This product page combines the manufacturer's device characteristics, exact-package sourcing information, family-level alternatives, application guidance, and PCB-level implementation notes to help engineers evaluate the MCP3426A2-E/SN before integrating a dual-channel 16-bit delta-sigma ADC.

طلب عرض سعر اتصل بنا
MCP3426A4-E/MC - 16-Bit Dual-Channel Delta-Sigma ADC
MCP3426A4-E/MC

MCP3426A4-E/MC - 16-Bit Dual-Channel Delta-Sigma ADC

The Microchip Technology MCP3426A4-E/MC is a 16-bit, dual-channel, low-noise delta-sigma analog-to-digital converter with differential inputs, an operating rate of 15 samples per second, and an 8-DFN package measuring 2 x 3 mm. Its two-channel architecture, differential input capability, and integrated 2.048 V reference make it suitable for precision measurement systems requiring accurate conversion of low-level analog signals. A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time oversampling, noise shaping, and digital filtering to produce high-resolution conversion results. It belongs to the broader ADC and data-converter hierarchy, where the MCP3426 family occupies the precision-measurement segment rather than the high-speed conversion segment. The delta-sigma architecture is especially useful when low noise and high effective resolution matter more than rapid acquisition. The MCP3426A4 provides conversion resolution up to 16 bits, two analog input channels, and a factory-programmed I2C address. Its integrated precision reference is rated at 2.048 V and establishes a differential input range of plus or minus 2.048 V. The A4 gain-code variant is identified as a 15 sps device, making it appropriate for slow-changing sensor signals, industrial process measurements, and instrumentation where output filtering is preferred over high conversion throughput. Microchip describes the MCP3426 as part of the low-noise, high-accuracy MCP342X family. The device combines differential input measurement with an onboard reference and digital interface in a compact DFN package. Because each channel uses differential sensing, common-mode voltage can be rejected when the signal source is arranged around the reference midpoint, provided the source remains within the device's allowable input range. Typical applications include bridge and strain-gauge signal conditioning, pressure and temperature sensor acquisition, laboratory instrumentation, low-level DC voltage measurement, and embedded industrial monitoring. The dual-channel configuration also allows a system to measure two related signals, such a differential sensor output and a diagnostic or reference channel, without requiring two separate converter packages. PCB design should prioritize a low-noise ground and reference layout, short analog traces, and placement of input and reference bypass capacitors close to their associated pins. Differential routing should be symmetric and avoid switching-node crossings. Before using the ±2.048 V differential range, verify the signal amplitude, common-mode voltage, gain-code implications, and downstream digital scaling against the manufacturer's pin and electrical-characteristics tables.

طلب عرض سعر اتصل بنا