المتحكمات الدقيقة

المنتجات (20,000+)

R5F10WLGAFB - RL78/L13 16-Bit 128KB Flash MCU | Renesas
R5F10WLGAFB

R5F10WLGAFB - RL78/L13 16-Bit 128KB Flash MCU | Renesas

The Renesas Electronics R5F10WLGAFB is a 16-bit RL78/L13 microcontroller featuring a 24 MHz CPU core, 128 KB of flash memory, and an integrated segment LCD driver, housed in a 64-pin LFQFP (10x10 mm) package. It is engineered for ultra-low-power operation in battery-driven and household appliances with LCD displays. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, non-volatile memory (flash/ROM), volatile memory (RAM), and a rich set of peripheral interfaces such as timers, ADCs, communication controllers, and—on RL78/L13—a segment LCD driver. The RL78 family sits within Renesas's low-power 16-bit MCU portfolio, which is widely adopted in metering, white goods, healthcare devices, and other segment-LCD applications that demand years of battery life. The RL78/L13 supports three LCD driving voltage generation methods: external resistance division, capacitive split mode, and an internal voltage boost, enabling compatibility with a wide range of segment LCD panels. The device also integrates multiple low-power modes, a 12-bit A/D converter, and serial interfaces such as UART, I2C, and CSI, while achieving current consumption in the microamp range during LCD display operation. Architecturally, the RL78 core uses a 3-stage pipelined CISC-style design with banking of register pages, achieving high code density and very low active current (typically sub-mA/MHz). The integrated LCD controller can drive up to a large number of segments, offloading display refresh from the CPU and enabling deep-sleep LCD retention. Operating voltage spans 1.6 V to 5.5 V with on-chip regulators, supporting direct connection to 2x or 3x AA/AAA cells or a single lithium primary cell. Typical applications include home appliances with segment LCDs (washing machines, microwave ovens, air conditioners), utility meters (water/gas/electricity), medical measurement devices (blood pressure monitors, glucose meters), and industrial sensor readouts. The combination of segment LCD driver and ultra-low-power run mode positions the RL78/L13 as a strong fit for battery-powered human-machine interface designs. When designing with this device, evaluate the maximum segment count of your target panel against the LCD controller's SEG/COM allocation, and confirm that the 24 MHz system clock and 128 KB flash budget are sufficient for your application code. For metering or measurement applications requiring higher ADC precision or larger memory, consider migrating to the RL78/L1A or RL78/G14 family. This page synthesizes distributor pricing, RL78/L13 family alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
R5F10WLGAFB#30 - 16-bit 24MHz RL78/L13 128KB MCU | Renesas
R5F10WLGAFB#30

R5F10WLGAFB#30 - 16-bit 24MHz RL78/L13 128KB MCU | Renesas

The Renesas R5F10WLGAFB#30 is a 16-bit RISC microcontroller from the RL78/L13 family, featuring 128 KB of flash memory, a 24 MHz CPU core, and integrated LCD segment driver, packaged in a 64-pin LFQFP (10x10 mm). It targets low-power applications requiring on-chip segment LCD control, such as home appliances, energy meters, and measurement devices, with operation from 1.6 V to 5.5 V supply. What is a 16-bit MCU? A 16-bit microcontroller (MCU) is a single-chip computer that processes instructions and data over a 16-bit data bus, sitting between 8-bit entry-level MCUs (e.g., PIC16, ATmega) and 32-bit Cortex-M parts in the embedded hierarchy. The RL78 core extends this category with an enhanced three-stage pipeline, ultra-low-power RUN/STOP/HALT/SNOOZE modes, and on-chip peripherals like 12-bit ADCs, comparators, and segment LCD controllers — placing it under the broader taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor IC. The RL78/L13 sub-family specifically targets segment-LCD human-machine-interface applications. Key features include 128 KB (128K x 8) flash program memory, configurable RAM/data flash, a 24 MHz maximum CPU clock, an integrated segment LCD driver (up to 8 common x 40 segment), a 12-bit A/D converter with up to 12 channels, multiple low-power modes (STOP, HALT, SNOOZE), and a wide 1.6 V–5.5 V operating range. Per the Renesas product page, this part is suitable for LCD display of home appliances or measurement devices, and it operates over the -40 °C to +85 °C industrial temperature range. From an architectural standpoint, the RL78 core uses a Harvard-style bus with separate program flash and SRAM paths, supports the 78K0R-compatible instruction set, and provides hardware multiply/divide plus a low-power on-chip oscillator that removes the need for an external crystal in many designs. The on-chip segment LCD driver generates the necessary AC bias waveforms internally, eliminating external charge-pump circuitry for static, 1/3, and 1/4 duty LCD glass. Typical applications include home appliance control boards (washing machines, microwave ovens, induction cookers), smart electricity/water/gas meters, HVAC thermostats, white-good user-interface panels, industrial measurement equipment with segment LCD readouts, and battery-powered sensor readouts. The integrated segment LCD driver reduces BOM by replacing external LCD bias ICs. When designing with this device, plan for decoupling capacitors near the VDD/VSS pins, leave the TOOL0 pin accessible for in-circuit debugger connection, and verify the segment/comment pin assignment matches your LCD glass map in the e2 studio / CS+ pin configurator. Power sequencing and SNOOZE-mode entry are configured in the Smart Configurator code-generation toolchain rather than via runtime registers.

طلب عرض سعر اتصل بنا
R5F10WMGAFB#30 - RL78/L13 16-bit MCU 128KB Flash | Renesas
R5F10WMGAFB#30

R5F10WMGAFB#30 - RL78/L13 16-bit MCU 128KB Flash | Renesas

The Renesas R5F10WMGAFB#30 is a 16-bit RL78/L13 microcontroller integrating 128 KB of code Flash, 8 KB of SRAM, and a built-in LCD controller/segment driver in an 80-pin LQFP package. It runs at up to 24 MHz from an internal oscillator and is targeted at low-power, battery-driven human-machine-interface applications such as home appliances and metering equipment. An RL78 microcontroller is a low-power 16-bit CISC core designed by NEC/Renesas as the successor to the 78K0 family. RL78 cores are tightly integrated with precision analog, LCD segment drivers, and multiple low-power operating modes. The RL78/L13 sub-family is the dedicated variant for applications with on-glass or on-board segment LCD displays, sitting within Renesas's broader RL78 product pyramid: RL78 core -> RL78/L1x (LCD) -> RL78/L13 (mid-density). This positioning makes the part a benchmark for years-of-battery-life white goods. Key features include three on-chip low-speed on-chip oscillators (15 kHz, 32 kHz, and the main 24 MHz high-speed on-chip oscillator), a 5-channel internal voltage booster for LCD bias, hardware multiplier/divider, 10-bit successive-approximation ADC, and a rich serial complement (CSI/SPI, UART, I2C, and LIN-bus). Power consumption is exceptionally low: approximately 0.6 µA in STOP retention mode with the LCD operating on a 32 kHz subclock and only ~3 mA active at 24 MHz. Architecturally, the RL78/L13 pairs a 3-stage pipeline CISC core with separated code/data buses (Harvard-style) and is built on a 130 nm mixed-signal process with embedded EEPROM/Flash. The integrated LCD controller supports up to 35 segment outputs x 4 common (or 39 x 8) configurations, configurable bias and frame frequency, and internal charge-pump or resistor-divider bias generation to allow operation from a single 1.8 V to 5.5 V supply. Typical applications include white-good HMI boards (washing-machine, microwave, induction-cooktop panels), residential gas/water/heat meters with display, blood-pressure and household medical displays, and remote-control units with battery charging indication. When designing with the R5F10WMGAFB#30, place the decoupling capacitors as close as possible to the VDD/VSS pins and reserve at least one full PCB layer for the LCD segment-trace routing. Selecting the correct bias source (internal resistor divider vs external capacitor divider) is critical - misconfiguring the charge pump on high-multiplex panels causes ghost segments. This page synthesizes distributor pricing, drop-in RL78/L13 alternatives, and PCB/HMI design notes drawn from the Renesas hardware manual and the verified web data - a combination not aggregated on any single distributor page.

طلب عرض سعر اتصل بنا
R5F10WMGAFB#50 - 128KB Flash 24MHz RL78/L13 MCU 80-LQFP | Renesas
R5F10WMGAFB#50

R5F10WMGAFB#50 - 128KB Flash 24MHz RL78/L13 MCU 80-LQFP | Renesas

The Renesas Electronics R5F10WMGAFB#50 is a 16-bit RL78/L13 microcontroller with 128KB flash, 24MHz CPU, integrated segment LCD driver, and on-chip LCD voltage boost circuitry, housed in an 80-pin LQFP package (12x12 mm). It is part of the RL78 family designed for ultra-low-power embedded applications with built-in LCD control. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, peripherals, and I/O. The RL78 is a 16-bit RISC architecture developed by Renesas that emphasizes ultra-low active and standby current consumption, making it well-suited for battery-powered and energy-harvesting products. The L13 sub-family adds a segment LCD controller/driver with three voltage-generation methods (external resistor divider, capacitive split, internal voltage boost), allowing direct connection to a wide range of segment LCD panels without external charge-pump circuitry. Key features include 128KB flash (128K x 8), 8KB SRAM, 24MHz maximum CPU clock, an integrated segment LCD driver supporting up to many segments, multiple low-power modes (HALT, STOP, SNOOZE), and rich peripheral set including 10-bit ADC, timers, UART/SPI/I2C, real-time clock, and DMA. The 80-LQFP package provides ample I/O for keypad, sensor, and display expansion. The RL78 core uses a Harvard-style architecture with a 3-stage pipeline and unified register bank, achieving high code density and 1.6 DMIPS/MHz class performance. Three LCD driving voltage generation methods support different panel sizes and power budgets, allowing designers to optimize for cost or efficiency. Typical applications include home appliance LCD displays (washing machines, microwaves, induction cookers), measurement devices (digital multimeters, blood pressure monitors, smart meters), industrial control panels, and any battery-powered product that drives a character or segment LCD. When designing with this MCU, ensure the LCD voltage generation method (external divider, capacitive split, or boost) is selected in software to match the panel and power budget. The 80-LQFP's exposed pad should be soldered to a sufficient ground pour for thermal and electrical stability. This page synthesizes distributor pricing, RL78/L13 family drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
R5F11BLEAFB#30 - RL78/G1F 16-Bit 32MHz 64KB MCU | Renesas
R5F11BLEAFB#30

R5F11BLEAFB#30 - RL78/G1F 16-Bit 32MHz 64KB MCU | Renesas

The Renesas R5F11BLEAFB#30 is a 16-bit RL78/G1F microcontroller IC featuring a 32MHz CPU, 64KB Flash program memory and 64-pin LFQFP (10x10 mm) packaging. Built around the low-power RL78 core architecture, it targets multifunctional embedded designs with enhanced functionality for sensorless BLDC motor control, integrating analog peripherals, timers and communication interfaces typically required by small appliance and motor drive systems. The RL78 family is Renesas' ultra-low-power 16-bit microcontroller family built on a proprietary 16-bit CISC-like core with Harvard architecture, low-leakage process technology and multiple low-power operating modes. RL78/G1F sits at the intersection of motor-control-oriented MCUs in the family, adding a complementary PWM timer, high-speed 12-bit ADC, comparator and op-amp peripherals necessary to drive 1-shunt or 3-shunt sensorless BLDC motors from a single chip. The platform inherits from the broader 16-bit MCU category (microcontroller -> embedded processor -> semiconductor IC), making it a logical step up from 8-bit controllers for applications demanding more deterministic motor commutation. Key specifications include 64KB (64K x 8) Flash for program storage, 4KB RAM (typical for this family), an internal 32MHz high-speed oscillator with PLL, multiple serial interfaces (UART, I2C, CSI/SPI), a 12-bit A/D converter, on-chip comparator and programmable gain amplifier, plus hardware multiplier/divider. The 64-LFQFP-10x10 package provides ample analog and digital pin assignments for three-phase motor drive plus keypad/LED matrix scan expansion, while industrial-grade -40C to +85C operation allows deployment in white goods, factory automation and outdoor equipment. Typical applications include sensorless BLDC motor control for small fans, pumps, compressors and appliance inverter boards, consumer electronics such as hair dryers and air purifiers, and industrial motor subsystems. The chip's integrated PGAs and comparators reduce bill-of-materials by eliminating several external op-amps that discrete BLDC designs would require. When designing with the R5F11BLEAFB#30, allocate sufficient PCB area for the analog ground island and keep the analog VDD/AVSS traces short. Renesas provides the RL78/G1F hardware manual and motor control support software packages for fast code ramp-up. This RL78/G1F family is optimized for sensorless BLDC motor control but should be evaluated against newer RA or RX families for designs needing ARM Cortex or higher-performance DSP extensions.

طلب عرض سعر اتصل بنا
R5F21102FP#U0 - 16MHz 16-Bit 8KB MCU | Renesas
R5F21102FP#U0

R5F21102FP#U0 - 16MHz 16-Bit 8KB MCU | Renesas

Renesas Electronics R5F21102FP#U0 is a 16-bit R8C/1x/10 microcontroller with a maximum operating frequency of 16 MHz, 8 KB of internal Flash memory, and a 32-pin LQFP package measuring 7 mm by 7 mm. It operates from a 3 V or 5 V supply and uses the R8C/Tiny Series CPU core implemented with a high-performance silicon gate CMOS process. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The R8C/1x/10 belongs to the R8C family of 16-bit single-chip microcomputers, a category positioned between simple 8-bit controllers and more complex application-specific processors. Its instruction-efficient architecture supports embedded control designs requiring deterministic peripheral access, compact firmware, and low component count. The R5F21102FP#U0 provides 8 KB of Flash memory, organized by the distributor listing as 8K x 8, for firmware storage. The manufacturer describes a 1 MB memory space for the R8C/10 family. Operation up to 16 MHz provides a meaningful performance margin for motor-control, appliance-control, industrial-control, and general embedded tasks while retaining a relatively simple embedded architecture. Renesas identifies the R8C/10 Group as a non-promotion family supported for customers that have already adopted these products and recommends the RL78/G14 Group for new designs. This lifecycle position makes R5F21102FP#U0 most appropriate for maintaining established equipment rather than starting a broadly deployed new platform. Its 3 V or 5 V operation also permits compatibility with conventional embedded supply rails. The 32-LQFP package provides 32 externally accessible pins and suits conventional leaded surface-mount assembly. The R5F21102FP#U0 ordering suffix corresponds to the lead-free, tray-packaged variant reported by Mouser and Findic. Designers should verify the exact pin multiplexing, peripheral functions, programming procedure, and timing constraints against the R5F21102FP datasheet before releasing a new PCB. The primary design consideration is lifecycle risk: Renesas explicitly recommends RL78/G14 for new designs. Existing products can remain on the R8C/10 when software stability and hardware compatibility outweigh the benefits of platform migration. A migration should be evaluated at application level because a different MCU architecture, memory map, peripheral set, or toolchain may require firmware and board changes. This page consolidates verified manufacturer and distributor information with lifecycle guidance, procurement context, and design considerations that are not normally presented as one engineering-ready summary. It also distinguishes established-product continuity from the manufacturer's recommendation for new R8C/10 or RL78/G14 designs.

طلب عرض سعر اتصل بنا
R5F21103FP#U0 - 16-Bit 16MHz MCU | Renesas Electronics
R5F21103FP#U0

R5F21103FP#U0 - 16-Bit 16MHz MCU | Renesas Electronics

The Renesas Electronics R5F21103FP#U0 is a 16-bit R8C/Tiny-series microcontroller with a 16 MHz operating frequency, 12 KB of flash program memory, and 22 I/O lines in a 32-LQFP 7 x 7 mm package. The device operates from a 3 V to 5 V supply and provides 768 x 8 bits of RAM for embedded control applications. Its supported connectivity includes SIO and UART/USART, while the integrated peripheral set includes an LED driver and watchdog timer. The R5F21103FP#U0 is supplied in tray packaging and is specified for an ambient operating range of -20°C to +85°C. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, working RAM, I/O ports, and peripherals on one integrated circuit. The R8C/Tiny core used here belongs to the broader 16-bit embedded-controller hierarchy. Compared with an 8-bit MCU, its 16-bit architecture supports wider arithmetic and more efficient processing of 16-bit data. The R5F21103FP#U0 also sits within the product hierarchy of flash-based microcontroller ICs, embedded controllers, and general-purpose semiconductor devices. Key features include a 16 MHz maximum clock, 12 KB of flash memory organized as 12K x 8, and 768 x 8 bits of RAM. The 22 available I/O lines support connections to sensors, indicators, switches, and serial communications equipment. SIO and UART/USART interfaces provide useful options for point-to-point communication, while the LED driver can simplify indicator-control designs. An internal oscillator is specified, and the watchdog timer supports system reliability functions when enabled by the application firmware. The device is manufactured using a high-performance silicon-gate CMOS process and is based on the R8C/Tiny CPU core, whose instruction set emphasizes instruction efficiency. The supplied operating range of -20°C to +85°C covers industrial and commercial ambient conditions. The 32-pin molded LQFP package provides 22 I/O functions alongside power, ground, clock, programming, reset, and other control connections. Exact pin assignments are not published in the supplied source excerpts, so a verified pinout is not asserted here. Typical applications include small industrial controllers, serial data-collection terminals, LED status panels, compact control boards, and legacy equipment upgrades where 16-bit processing and serial communication are required. In a UART-based controller, the device can coordinate a local sensor or actuator while the watchdog timer helps detect a stalled software loop. Its 12 KB flash capacity is appropriate for compact control firmware, and 768 x 8 bits of RAM provides working space for variables, buffers, and protocol state. Designers should confirm clock, reset, programming-interface, and peripheral-pin assignments against the manufacturer datasheet before layout release. The 3 V to 5 V operating range must also be respected, and the PCB should provide clean supply decoupling and programming access. Because this R8C/10 family is supported only for customers that have already adopted the products, new projects should evaluate the manufacturer-recommended RL78/G14 family unless firmware continuity requires the R8C/10 architecture. This page consolidates verified distributor and manufacturer information, exact memory and package specifications, sourcing guidance, and an explicit assessment of drop-in replacement availability. It also distinguishes documented facts from parameters requiring confirmation, helping engineers evaluate the R5F21103FP#U0 without relying on unsupported substitute claims.

طلب عرض سعر اتصل بنا
R5F21104FP#U0 - 16-bit 16MHz R8C MCU | Renesas
R5F21104FP#U0

R5F21104FP#U0 - 16-bit 16MHz R8C MCU | Renesas

Renesas Electronics R5F21104FP#U0 is a 16-bit R8C-series microcontroller with a 16 MHz operating frequency, 16 KB of flash program memory, and a 32-LQFP 7 x 7 mm package. The verified product listings identify it as part of the R8C/1x/10 family and support operation from a 3 V to 5 V supply range. Its compact package and combination of embedded flash and general-purpose microcontroller resources suit compact control systems, industrial equipment, and embedded products. A microcontroller is a semiconductor containing a processor core, program memory, data memory, peripheral interfaces, and dedicated I/O in one integrated circuit. The R8C architecture places this device in the hierarchy of embedded microcontrollers, embedded processors, programmable controllers, and semiconductors. Compared with a discrete processor design, an integrated MCU reduces board area and simplifies the relationship among firmware execution, pin multiplexing, timing, and serial communications. The verified data identifies a 16-bit R8C core operating at up to 16 MHz, with 16 KB of flash organized as 16K x 8. The device is available in a 32-LQFP package measuring 7 x 7 mm and is associated with a 3 V to 5 V operating class. The #U0 ordering suffix and tray packaging are reflected in distributor records, while another distributor description identifies the part as lead-free. The R8C/1x/10 family combines a compact general-purpose microcontroller architecture with embedded flash and dedicated peripheral resources. Its 16 MHz clock rate provides a clear baseline for control-loop, monitoring, human-interface, and communication-management tasks. Flash memory retains application firmware in the device itself, while the 32-LQFP package provides 32 external leads for power, ground, reset, clock, serial interfaces, timers, and general-purpose I/O according to the manufacturer datasheet. Typical uses include industrial controllers, sensor-interface equipment, compact appliance controls, building-control modules, and communication-oriented embedded equipment. A design using this MCU can consolidate a small state machine, periodic sensor sampling, actuator commands, and local diagnostics into one component. For battery- or USB-powered products, the 3 V to 5 V class is especially useful, although the final power budget must be checked against the exact operating conditions. Designers should preserve the decoupling and signal-integrity layout shown in the manufacturer datasheet, provide a stable clock and reset arrangement, and confirm that every peripheral function assigned to a multiplexed pin remains available in the selected package. Firmware should also be validated against the operating temperature range and supply limits before production release. This page consolidates the verified distributor and manufacturer information, distinguishes a documented same-family upgrade from unsupported substitutes, and adds practical selection and design guidance that can be applied without confusing functional alternatives with true pin-compatible drop-in replacements.

طلب عرض سعر اتصل بنا
R5F21112FP#U0 - 16-bit 20MHz 8KB Flash MCU | Renesas
R5F21112FP#U0

R5F21112FP#U0 - 16-bit 20MHz 8KB Flash MCU | Renesas

Renesas Electronics R5F21112FP#U0 is a 16-bit R8C/1x/11 series microcontroller with a 20 MHz operating frequency and 8 KB of flash memory, supplied in a 32-pin LQFP package. It is designed for embedded control applications that require efficient instruction execution, compact packaging and embedded flash. The R8C/Tiny-series core provides a 16-bit processing architecture suitable for industrial, consumer and embedded product control systems. The MCU operates from a 3 V to 5 V supply, with the available product information identifying a 3/5 V device. The R5F21112FP family uses a high-performance silicon gate CMOS process and is packaged as a 32-pin plastic molded LQFP. Its 8 KB flash memory provides on-chip program storage for firmware, while the 16-bit CPU core supports efficient control-loop and peripheral-oriented software execution. Key characteristics include a 20 MHz maximum operating frequency, 8 KB flash memory and a 32-LQFP (7 x 7 mm) package. The available distributor and manufacturer listings identify this part as an R8C/1x/11 microcontroller. The verified product information does not include detailed RAM size, peripheral inventory, ADC specifications, timer resources, I/O count or electrical timing values, so those details should be confirmed in the manufacturer datasheet before final design release. R5F21112FP#U0 is suitable for compact embedded controllers, industrial equipment, appliance controls, instrumentation, serial-interface products and general-purpose embedded control boards. Its small LQFP package can support prototype and moderate-volume production layouts when the required peripheral and pin functions are available. Designers should verify the exact pin assignments, clock requirements, reset behavior and memory map against the official documentation before PCB routing or firmware development. The most important engineering consideration is that the #U0 ordering suffix and 32-LQFP footprint do not, by themselves, establish complete drop-in compatibility with another MCU. Pin assignment, core architecture, memory size, peripheral resources, voltage tolerance and timing must all be compared. This page consolidates the verified distributor and Renesas product information while avoiding unsupported assumptions about missing technical parameters.

طلب عرض سعر اتصل بنا
R5F21113FP#U0 - 16-Bit 20MHz R8C MCU | Renesas
R5F21113FP#U0

R5F21113FP#U0 - 16-Bit 20MHz R8C MCU | Renesas

The Renesas Electronics R5F21113FP#U0 is a 16-bit R8C/1x/11 microcontroller operating at up to 20 MHz with 12 KB of flash memory in a 32-LQFP 7 x 7 mm package. Designed for compact embedded-control systems, the device combines a high-performance R8C CPU core with a 3 V to 5 V operating range and lead-free construction. Its 12K x 8 flash organization supports firmware storage for industrial controllers, consumer equipment, instrumentation, and embedded peripheral controllers. A microcontroller is an integrated circuit containing a processor core, program memory, data memory, peripherals, and I/O on one device. The R8C architecture belongs to the 16-bit microcontroller class and combines relatively high instruction efficiency with a compact instruction set suited to embedded products. Within the broader semiconductor hierarchy, the R5F21113FP#U0 is a general-purpose embedded processor and system-on-chip component rather than a discrete logic or analog device. Key characteristics include a 20 MHz maximum operating frequency, 12 KB of flash program memory, a 3 V to 5 V supply range, and a 32-pin plastic molded LQFP package. The flash-based program architecture allows firmware to be stored directly in the MCU rather than in an external memory device, helping reduce total system complexity. The manufacturer describes the part within its R8C/11 family of 16-bit microcontrollers with R8C CPU cores. The R8C/1x/11 core is intended for applications that require efficient 16-bit processing without the cost and complexity of a high-end application processor. Its compact LQFP footprint remains compatible with conventional surface-mount assembly and reflow processes, while the 7 x 7 mm body allows placement alongside analog, power, communication, and sensing components on a densely populated control board. Typical uses include industrial control modules, appliance controllers, measurement equipment, motor-control peripherals, sensor-hub designs, and compact consumer products. For battery-operated or precision analog systems, designers should confirm supply voltage, peripheral mix, clock requirements, and power-consumption targets against the manufacturer datasheet before committing the MCU to a board architecture. The primary design consideration is firmware portability across the R8C/1x/11 family. Because package suffix codes can identify different temperature, packaging, or ordering options, engineers should compare the exact MPN, pin assignments, peripheral availability, and memory configuration rather than assuming that every family member has identical behavior. This page organizes the principal specifications, sourcing information, family-level drop-in options, application guidance, and practical design notes. It is intended to help engineers identify whether the R5F21113FP#U0 matches a 16-bit embedded-control requirement before schematic capture and PCB layout begin.

طلب عرض سعر اتصل بنا
R5F21113FP#W4 - 16-Bit 20MHz 12KB Flash MCU | Renesas
R5F21113FP#W4

R5F21113FP#W4 - 16-Bit 20MHz 12KB Flash MCU | Renesas

The Renesas Electronics R5F21113FP#W4 is a 16-bit R8C/1x/11 family microcontroller with a 20 MHz operating speed, 12 KB of flash program memory, 768 bytes of RAM, and 22 I/O pins. The device is packaged in a 32-pin LQFP measuring 7 mm by 7 mm and is supplied in tray packaging. Its R8C/Tiny-series CPU core uses a high-performance silicon-gate CMOS process to provide an efficient architecture for embedded control applications. An R8C microcontroller is a 16-bit embedded-control component within the broader MCU and microprocessor hierarchy. It combines flash-resident firmware, internal data RAM, timers, serial interfaces, and general-purpose I/O in one device. This integration allows compact control systems to replace separate processor, memory, and peripheral components while keeping firmware, board area, and assembly requirements consolidated. Key features include 12 KB of flash memory organized as 12K by 8 bytes, 768 bytes of RAM, 22 general-purpose I/O lines, and a maximum listed operating frequency of 20 MHz. The internal oscillator reduces the number of external timing components required in many designs. Tray packaging supports volume production and automated PCB assembly when the board geometry and component orientation match the 32-pin LQFP footprint. The R8C/1x/11 architecture is intended for compact embedded controllers that benefit from 16-bit instruction handling and efficient peripheral integration. The manufacturer describes the R8C/11 family as supported primarily for customers that previously adopted these products and recommends the RL78/G14 family for new designs. Legacy-product support status should therefore be considered when planning a long-lived design. Typical uses include industrial control modules, compact instrumentation, appliance controllers, embedded interface products, and small automation equipment. The 22 available I/O pins provide connectivity for sensors, indicators, switches, communications links, and discrete actuators, while the 20 MHz operating rate supports time-sensitive control tasks. PCB planning should follow the manufacturer package drawing and pin-assignment table. Confirm oscillator requirements, supply voltage limits, programming connections, and all peripheral multiplexing before releasing a layout. Because firmware, toolchain, and peripheral behavior are architecture-specific, treat software migration as part of replacement planning rather than assuming electrical similarity alone guarantees interchangeability. This product page consolidates the device identity, memory organization, package characteristics, sourcing information, and replacement constraints into a design-focused reference. It also distinguishes true drop-in interchangeability from merely similar microcontrollers by requiring the same footprint, pin compatibility, suitable electrical parameters, and compatible firmware behavior.

طلب عرض سعر اتصل بنا
R5F21114FP#U0 - 16-Bit 20MHz MCU | Renesas Electronics
R5F21114FP#U0

R5F21114FP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

The Renesas Electronics R5F21114FP#U0 is a 16-bit R8C microcontroller with a 20 MHz operating frequency, 16 KB flash program memory and a 32-LQFP 7 x 7 mm package. The device operates from 3 V to 5 V according to Mouser, making it suitable for embedded control systems that use either 3.3 V or 5 V power rails. Its R8C CPU core combines a compact 16-bit architecture with efficient CISC-style instructions. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, peripherals and I/O into one package. The R8C/Tiny family belongs to the broader hierarchy of embedded processors, microcontrollers, semiconductor devices and electronic control components. Renesas describes the R5F21114FP#U0 as a non-promotion member of its 16-bit microcontroller range, and its order page lists the device for procurement. The R5F21114FP#U0 provides 16 KB of flash memory, a 20 MHz maximum clock and 3 V to 5 V supply operation in a 32-LQFP package. Compared with a general-purpose desktop processor, this device is optimized for compact embedded control, where deterministic peripheral access, compact implementation and low board-area requirements matter more than graphics performance or large memory capacity. The 7 x 7 mm LQFP also remains inspectable after soldering and is suitable for conventional PCB assembly processes. The MCU is manufactured using a high-performance silicon-gate CMOS process, as described by the Renesas datasheet information. This implementation supports the R8C/Tiny CPU core and a broad set of embedded-control resources. Exact RAM capacity, peripheral inventory, clock-generation options and electrical limits are not included in the verified excerpts supplied for this page, so those values require confirmation in the complete manufacturer datasheet before final design sign-off. Typical uses include industrial controllers, consumer products, measurement equipment and compact embedded control modules. The 16 KB flash capacity is appropriate for moderate firmware sizes, while the 3 V to 5 V operating range supports common industrial and commercial supply voltages. Designers should confirm peripheral timing, memory availability and pin-level requirements when migrating a board from another Renesas MCU. For PCB implementation, follow the complete Renesas package drawing and pin-assignment documentation. Place bypass capacitors near the supply pins, route sensitive signals away from switching nodes and verify programming, reset and clock connectivity against the manufacturer reference design. Because the supplied excerpts do not provide a complete verified pin table, no pin assignments should be inferred from the package drawing alone. This product record consolidates verified distributor specifications, current pricing information, same-family alternatives and practical sourcing guidance. It is intended to support initial design and procurement decisions while clearly separating confirmed data from parameters that still require review in the full Renesas datasheet.

طلب عرض سعر اتصل بنا
R5F21114FP#W4 - 16-Bit R8C Microcontroller | Renesas
R5F21114FP#W4

R5F21114FP#W4 - 16-Bit R8C Microcontroller | Renesas

Renesas Electronics R5F21114FP#W4 is a 16-bit R8C/Tiny-series microcontroller operating at up to 20 MHz, with 16 KB of Flash program memory and 1 KB of RAM. The device is packaged in a 32-LQFP measuring 7 x 7 mm and is supplied in tape-and-reel packaging. Its 22 I/O pins provide a practical interface for embedded control tasks. A microcontroller is a programmable semiconductor that combines a processor core, program memory, data memory, I/O ports, and peripherals on one integrated circuit. Within the embedded-system hierarchy, the R8C/Tiny family belongs to the 16-bit microcontroller class and provides a compact platform for appliance controls, industrial equipment, instrumentation, and embedded products. Its instruction-efficient R8C core is designed for compact systems that require more processing capability than a basic 8-bit controller. The R5F21114FP#W4 combines 16 KB of Flash memory with 1 KB of internal RAM. Flash memory retains programmed firmware when power is removed, while RAM provides volatile working space for stack operations, variables, and intermediate calculations. A 20 MHz operating frequency supports time-sensitive control tasks, and the 22 available I/O pins allow the device to connect directly to switches, sensors, displays, actuators, and interface circuits. The device uses Renesas silicon-gate CMOS technology and an instruction-efficient R8C/Tiny CPU core. Its 32-pin plastic-molded LQFP package is suitable for automated board assembly and provides a conventional 7 x 7 mm footprint. The W4 ordering designation identifies the tape-and-reel configuration, supporting repeatable pick-and-place and manufacturing operations. Pin assignment, signal levels, clock requirements, and peripheral functions should be confirmed against the R8C/11 Group Datasheet before layout release. Typical uses include small appliance controllers, sensor-interfaces, industrial modules, instrument panels, and compact embedded control systems. The device is useful when a design needs a deterministic 16-bit control platform without a large external memory subsystem. Its 16 KB firmware space can hold a compact control routine, startup logic, state machine, and communication handler, although final firmware sizing must be checked after compilation. Layout planning should preserve access to all programming and debug functions and follow the manufacturer’s recommended decoupling and clock arrangements. Confirm the exact pin roles, operating-voltage range, reset behavior, peripheral mix, and programming interface against the applicable Renesas documentation before schematic capture or PCB release. This page organizes the R5F21114FP#W4 core specifications, manufacturing attributes, application context, and design considerations. It also distinguishes verified device characteristics from engineering information that must still be checked in the R8C/11 Group Datasheet and final design documentation.

طلب عرض سعر اتصل بنا
R5F21122FP#U0 - 16-Bit 16MHz R8C MCU | Renesas Electronics
R5F21122FP#U0

R5F21122FP#U0 - 16-Bit 16MHz R8C MCU | Renesas Electronics

The Renesas Electronics R5F21122FP#U0 is a 16-bit R8C/1x/12 embedded microcontroller with a 16 MHz clock, 8 KB of Flash program memory, and a 32-pin LQFP package measuring 7 x 7 mm. It operates from a 3/5 V supply and is designed for compact control systems requiring efficient instruction execution and a small pin count. An R8C microcontroller is a 16-bit CISC-based control device within the broader embedded-microcontroller and semiconductor hierarchy. The R8C Tiny Series core combines compact instruction encoding with a 1 Mb address space, allowing embedded designers to balance processing performance, memory capacity, and board area. The R5F21122FP#U0 is positioned for cost-sensitive industrial, appliance, instrumentation, and general embedded-control applications. Key characteristics include 16-bit processing, an operating clock of 16 MHz, 8 KB of Flash memory, 4 KB of data Flash, and 3/5 V operation. Its R8C/1x/12 group designation identifies the core and device family, while the 32-pin LQFP exposes the required peripheral and power connections in a standard surface-mount footprint. The silicon-gate CMOS process supports integration of the CPU core, program memory, data Flash, timers, serial interfaces, and control peripherals. The manufacturer's product page describes a device built around the R8C Tiny Series CPU core with sophisticated instructions designed for high instruction efficiency. A 1 Mb address space provides substantially more architectural range than the 8 KB physical Flash allocation alone suggests. This addressability supports organized firmware structures and expansion of peripheral or memory mapping within the R8C architecture, although the complete map should be confirmed in the manufacturer datasheet. Typical uses include industrial equipment, consumer appliances, sensor controllers, building controls, motor-control peripherals, and compact embedded instruments. The 32-LQFP package is particularly useful where a smaller footprint than a high-pin-count MCU is desirable while retaining enough I/O for standard control functions. The 3/5 V supply requirement also suits systems built around legacy-compatible embedded-control architectures. Designers should verify the complete peripheral set, interrupt behavior, electrical limits, and exact pin assignments in the manufacturer datasheet before schematic capture. PCB layout must preserve adequate clearance around all 32 leads and route sensitive oscillator and supply connections appropriately. Firmware selection should account for the 8 KB program-memory ceiling, while any use of data Flash requires the appropriate endurance and write-cycle handling from the device documentation. This product page combines manufacturer and distributor technical information, package details, engineering-oriented application guidance, and an honest drop-in replacement assessment. It is intended to help engineers evaluate memory constraints, pin compatibility, supply requirements, and design tradeoffs before committing the R5F21122FP#U0 to an embedded-control design.

طلب عرض سعر اتصل بنا
R5F21124FP#U0 - 16-bit 16MHz 16KB Flash MCU | Renesas Electronics
R5F21124FP#U0

R5F21124FP#U0 - 16-bit 16MHz 16KB Flash MCU | Renesas Electronics

The Renesas Electronics R5F21124FP#U0 is a 16-bit R8C/1x/12 series microcontroller with a 16 MHz operating frequency, 16KB of flash program memory, and a 32-pin LQFP package measuring 7 mm by 7 mm. It operates from a 3 V or 5 V supply and is identified as a Pb-Free device. The manufacturer describes this MCU as being built with a high-performance silicon gate CMOS process and using the R8C Tiny Series CPU core. Its architecture combines a compact 16-bit microcontroller with embedded flash memory in a package intended for space-constrained embedded systems. A microcontroller is a semiconductor device that integrates a CPU core, program memory, data memory, peripheral functions, and I/O into one integrated circuit. The R5F21124FP#U0 belongs to the R8C/12 group of Renesas 16-bit microcontrollers, a family positioned between simple 8-bit controllers and more resource-intensive 32-bit application processors. This device is intended for embedded control, where an application program must handle sensor inputs, actuator outputs, communications, timing, and user-interface functions in one compact component. The main engineering characteristics visible for this exact MPN are the 16-bit CPU architecture, 16 MHz maximum clock information identified in the product listing, 16KB flash storage, 3 V or 5 V operation, and 32-LQFP packaging. The R5F21124FP#U0 is marked as Pb-Free. Detailed electrical limits, RAM capacity, peripheral channel assignments, clock-tree options, timer resources, communication interfaces, and absolute maximum ratings must be confirmed in the Renesas datasheet before a design is released. Renesas states that the R8C/12 group is supported for customers that have already adopted these products and recommends the RL78/G14 group for new designs. This lifecycle distinction is important: the R5F21124FP#U0 remains useful for maintenance, continuity, and previously qualified industrial or consumer programs, but engineers should verify roadmap and sourcing conditions before starting a new platform. Existing software, peripheral mapping, and board layouts can make continuity preferable to redesign, provided the product remains suitable for the target application. Typical uses include compact industrial controllers, sensor-conditioning and monitoring equipment, small appliance controls, communication modules, and legacy embedded systems that require a 16-bit core with embedded flash. The 32-LQFP package provides a conventional quad flat-pack footprint suitable for automated PCB assembly and prototype fabrication. Because the exact pin map and peripheral multiplexing are not reproduced in the product-page search result, board designers should use the manufacturer pin-assignment table when assigning ports, power pins, reset, clock, and programming signals. This page summarizes the exact R5F21124FP#U0 identity and technical attributes, compares it with verified catalog information, and provides procurement-oriented guidance without presenting unverified competitor substitutions. For current commercial terms, use the Request a Quote form on this page. For a new design, evaluate the recommended RL78/G14 path; for an existing R8C/12 platform, confirm pin compatibility, software support, lifecycle status, and supply continuity through the manufacturer's product documentation.

طلب عرض سعر اتصل بنا
R5F21132FP#U0 - 16-Bit 20MHz MCU | Renesas Electronics
R5F21132FP#U0

R5F21132FP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

Renesas Electronics R5F21132FP#U0 is a 16-bit R8C/13 series microcontroller with a 20 MHz operating frequency, 8 KB flash memory, and a 32-LQFP 7 x 7 mm package. It operates across a 2.7 V to 5.5 V supply range and provides a 10-bit ADC. The device uses an R8C/Tiny Series CPU core and high-performance silicon gate CMOS process. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, timers, serial interfaces, analog peripherals, and interrupt handling into one device. The R8C/13 belongs to the hierarchy of 16-bit embedded processors, microcontrollers, and general-purpose embedded control ICs. Renesas supports this group for customers that have already adopted its products and recommends the RL78/G14 Group for new designs. The principal features include 16-bit processing at 20 MHz, 8 KB of flash organized as 8K x 8, a 2.7 V to 5.5 V operating supply range, and a 10-bit ADC. The 32-pin LQFP package provides a practical surface-mount option for industrial, consumer, and control systems where board area is less constrained than in the smallest plastic packages. The 8K x 8 flash organization supports embedded firmware storage while the 20 MHz clock provides control and peripheral timing headroom. The R8C/Tiny Series core emphasizes instruction efficiency in a compact 16-bit architecture. Its on-chip peripherals reduce the need for external components in designs involving signal acquisition, timing, serial communication, and digital control. The high-performance silicon gate CMOS process supports the device's operating characteristics, while the R8C/13 family provides a common software-oriented platform for compatible members. Typical applications include industrial control panels, sensor-conditioning systems, motor-control support circuitry, programmable timers, data-acquisition modules, and compact consumer appliances. The 10-bit ADC is suitable for many sensor and control tasks where resolution and conversion performance are adequate for monitoring rather than precision measurement. A qualified firmware engineer should confirm the required timers, serial interfaces, analog channels, and interrupt resources against the manufacturer datasheet. Design attention should focus on clocking, decoupling, reset behavior, and firmware migration because this is a non-promotion family intended primarily for previously adopted designs. Confirm pin assignments and peripheral multiplexing on the physical R5F21132FP package before making an engineering change. For new projects, evaluate the manufacturer-recommended RL78/G14 path rather than assuming this legacy device is the optimal architectural choice. This page consolidates the manufacturer's device positioning, verified distributor specifications, package information, practical application guidance, and the limited drop-in replacement landscape. The replacement list is intentionally narrow because a genuine alternative must preserve the 32-LQFP footprint, pin compatibility, operating voltage, and embedded-control requirements rather than merely offer similar clock speed or memory capacity.

طلب عرض سعر اتصل بنا
R5F21133FP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics
R5F21133FP#U0

R5F21133FP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

Renesas Electronics R5F21133FP#U0 is a 16-bit R8C/1x/13 microcontroller operating at up to 20 MHz, with 12 KB of flash memory and a 32-LQFP 7 x 7 mm package. The R5F21133FP#U0 is designed for embedded control applications that require deterministic instruction execution, compact integration, and a 32-pin surface-mount footprint. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and I/O into one component. The R8C/1x/13 belongs to the R8C family of 16-bit embedded controllers, which sits within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Renesas positions the R8C/11 Group for designs already based on the family, while recommending RL78/G14 for new projects. Key characteristics include a 16-bit CPU, a 20 MHz operating frequency, and 12 KB of flash memory. The device is identified as the R8C/1x/13 configuration and is offered in a compact 32-LQFP package measuring 7 x 7 mm. The listed operating range includes 3 V and 5 V supply operation, while one distributor specification identifies a 2.7 V to 5.5 V working range for this exact ordered device. The R8C CPU core uses instruction-efficient embedded-control techniques intended to balance processing performance with compact code size. This makes the R5F21133FP#U0 relevant to designs requiring more control capability than an 8-bit MCU while retaining a relatively small 32-pin footprint. The flash-memory capacity provides 12 KB for firmware, constants, and configuration data. Typical uses include industrial automation, embedded measurement equipment, appliance control, consumer-product interfaces, and compact motor or system-control modules. The 20 MHz clock rate is useful for time-critical control loops, while the 7 x 7 mm LQFP package simplifies assembly on conventional surface-mount production lines. PCB design should preserve a clean analog and digital supply path, route oscillator and reset signals away from noisy switching nodes, and follow the package-specific land pattern in the manufacturer datasheet. Firmware migration also requires checking peripheral assignments, interrupt vectors, memory organization, and peripheral-register compatibility rather than assuming software compatibility from the family name alone. This product page combines the exact ordering information, technical identity, sourcing workflow, and engineering considerations for R5F21133FP#U0. It helps designers separate the verified R8C/1x/13 configuration from similarly named family members before committing to a PCB or production release.

طلب عرض سعر اتصل بنا
R5F21134FP#U0 - 16-bit 20MHz R8C/13 MCU, 16KB Flash, 32-LQFP | Renesas
R5F21134FP#U0

R5F21134FP#U0 - 16-bit 20MHz R8C/13 MCU, 16KB Flash, 32-LQFP | Renesas

Renesas Electronics R5F21134FP#U0 is a 16-bit R8C/Tiny Series CMOS microcontroller built on the R8C/13 group core, operating at up to 20 MHz with 16 KB of on-chip Flash memory in a 32-pin plastic molded LQFP (7x7 mm) package. The device runs from a single 2.7 V to 5.5 V supply, provides a 1 MB program address space, and integrates two UART channels plus a watchdog timer for compact embedded control designs. A microcontroller is a single-chip computer that integrates a CPU core, memory, and peripherals such as serial transceivers, timers, and I/O onto one die. The R8C/Tiny family from Renesas sits in the 8/16-bit embedded controller tier of the semiconductor hierarchy: MCU -> embedded controller -> integrated circuit -> semiconductor. Renesas positions the R8C/13 group as a high-efficiency 16-bit architecture aimed at industrial, consumer, and appliance control where code density and peripheral integration matter more than raw clock speed. Key features of the R5F21134FP#U0 include 20 MHz operation from the R8C/Tiny Series CPU core, 16 KB (16K x 8) Flash program memory in a flash-memory-version device, a 1 MB address space, a UART interface, and a watchdog timer. The high-performance silicon gate CMOS process supports the low-power, high-throughput behaviour expected of this family, and the 3/5 V compatibility range allows the same design to run from 3.3 V or 5 V rails. Technically, the R8C/13 core balances instruction efficiency with fast register-to-register execution, which reduces cycle counts for typical control loops. Because the part is a non-promotion device, it is intended for customers who already adopted the R8C/13 group; Renesas recommends the RL78/G14 group for new designs, so supply continuity should be confirmed before starting new platform development. Typical uses include compact motor and relay control, industrial sensor conditioning and monitoring nodes, appliance and instrumentation panels, and UART-connected peripherals such as RS-232 or CAN bridges. The 32-LQFP footprint also makes it attractive for cost-driven designs that need more pins than a small DFN package allows while staying under 8 mm on a side. When designing with this part, budget decoupling close to VCC and AVCC pins, keep the 32-pin LQFP layout free of thermal vias unless required, and confirm the UART peripheral count and pin multiplexing against the datasheet before committing the board. Supply is limited because the R8C/13 group is a non-promotion family, so securing stock early is advisable. This page consolidates distributor pricing, verified pin and package data, structured drop-in alternatives, and practical design guidance that is not assembled in the manufacturer datasheet, giving design engineers a single reference for sourcing decisions.

طلب عرض سعر اتصل بنا
R5F21134FP#W4 - 16-Bit 20MHz MCU | Renesas Electronics
R5F21134FP#W4

R5F21134FP#W4 - 16-Bit 20MHz MCU | Renesas Electronics

The Renesas Electronics R5F21134FP#W4 is a 16-bit R8C/13-series microcontroller with a 20 MHz operating frequency, 16 KB of flash program memory, 1 KB of RAM, and 22 I/O pins in a 32-pin LQFP package. It is designed for embedded control applications requiring efficient instruction execution, mixed analog and digital peripheral integration, and a compact surface-mount footprint. The #W4 ordering code denotes the tape-and-reel packaging configuration. A microcontroller is the central control element of an embedded electronic system. It executes firmware, reads sensor inputs, manages actuators, and coordinates communication and timing functions. Within the semiconductor hierarchy, the R5F21134FP#W4 is a general-purpose microcontroller, part of the Renesas R8C/Tiny Series family, and is built around the R8C/13 CPU core. The R8C core uses a 16-bit architecture with instructions designed for efficient embedded-control operation. The principal device characteristics include 16 KB of flash memory, 1 KB of RAM, a maximum stated clock frequency of 20 MHz, and 22 general-purpose I/O pins. Its internal oscillator arrangement provides the timing basis for control firmware without requiring a separate clock source for basic operation. The 32-pin plastic molded LQFP package supports conventional surface-mount assembly and provides a practical upgrade path for compact embedded-control boards. Renesas identifies the R8C/13 Group as being supported for customers that previously adopted these products and recommends the RL78/G14 Group for new designs. That distinction matters during design planning: an existing R8C-based product may benefit from continued software and platform continuity, while a new project should evaluate the manufacturer-recommended RL78/G14 family against current availability, development-tool support, and qualification requirements. Typical implementation areas include industrial equipment controllers, building and environmental control systems, measurement instruments, compact consumer appliances, and embedded peripheral controllers. The 16 KB flash capacity is suitable for focused control firmware, while the 20 MHz operating rate supports responsive multitasking and time-based control logic. The 1 KB RAM and 22 I/O pins make the device most appropriate for designs where external memory or high-pin-count expansion is unnecessary. When designing around this device, verify the complete pin assignment, peripheral multiplexing, electrical limits, and programming procedure against the Renesas R5F21134FP datasheet. Confirm that all required timers, serial interfaces, analog functions, clock sources, and interrupt priorities are available on the selected 32-pin LQFP variant. PCB design should preserve access to programming and debug signals while providing appropriate decoupling and a stable clock arrangement. This product page consolidates the manufacturer family positioning, core specifications, package details, sourcing guidance, and practical selection considerations into one engineering reference. It also distinguishes verified device characteristics from design assumptions and identifies where engineers should consult the official datasheet before schematic release or firmware development.

طلب عرض سعر اتصل بنا
R5F21142SP#U0 16-Bit 20MHz 8KB MCU | Renesas Electronics
R5F21142SP#U0

R5F21142SP#U0 16-Bit 20MHz 8KB MCU | Renesas Electronics

Renesas Electronics R5F21142SP#U0 is a 16-bit single-chip microcomputer in the R8C/14 family, operated at up to 20 MHz and supplied in a 20-pin LSSOP package. The verified product information identifies 8 KB of flash memory, a 16-bit R8C CPU core, and 3/5 V operation. The part is intended for embedded control applications that require a compact surface-mount microcontroller, modest on-chip flash, and a 20 MHz processing capability. It is a non-promotion R8C/14 Group device, so it is primarily relevant to systems already using the R8C platform. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, peripherals, and input/output functions in one package. The R8C/Tiny Series CPU core used by this device provides the execution environment for embedded control logic, while the 8 KB flash provides program storage for firmware. This MCU belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors used in industrial, consumer, and communication equipment. The R5F21142SP#U0 combines a 20 MHz maximum operating frequency with 16-bit processing and 8 KB flash in a 20-LSSOP package. Verified distributor information identifies the R8C/1x/14 family and describes the device as a 16-bit MCU with 8K x 8 flash. The package is identified as 20-LSSOP with a stated width of 4.40 mm. The available verified data does not specify RAM size, peripheral details, pin names, operating temperature, or electrical limits, so those values should be confirmed in the manufacturer datasheet before design release. The manufacturer describes the R8C/14 Group as using a high-performance silicon-gate CMOS process and an R8C/Tiny Series CPU core. It also states that the group is supported for customers that have already adopted these products, while recommending the RL78/G12 Group for new designs. This lifecycle statement is important when selecting a replacement for an existing R8C design because migration to a different MCU family may require software, toolchain, and board-level changes. Typical uses for this device include compact industrial controllers, peripheral controllers, instrumentation, and legacy embedded platforms where the existing R8C software and 20-LSSOP footprint are already established. The 3/5 V operating capability can support systems that need compatibility with conventional 3.3 V or 5 V logic environments. The available information does not identify a specific reference design or application circuit, so those applications should be treated as general application categories rather than manufacturer-qualified examples. For PCB design, confirm the exact 20-pin LSSOP land pattern, exposed-pad requirements, recommended decoupling, programming interface, and pin multiplexing against the official datasheet. Do not infer missing pin functions from the package outline. Because this is a non-promotion MCU, production planning should also verify lifecycle status, software-tool availability, and the availability of a suitable replacement before committing to new platform designs. This page consolidates the verified distributor and manufacturer information for R5F21142SP#U0, including pricing, package details, lifecycle context, sourcing links, and practical selection considerations. It distinguishes documented R8C/14 characteristics from parameters that remain unavailable in the supplied data, helping engineers make an evidence-based sourcing decision.

طلب عرض سعر اتصل بنا
R5F21142SP#W4 - 16-Bit 20MHz MCU | Renesas
R5F21142SP#W4

R5F21142SP#W4 - 16-Bit 20MHz MCU | Renesas

Renesas Electronics R5F21142SP#W4 is a 16-bit R8C/1x/14 microcontroller operating at up to 20 MHz, with 8 KB of flash program memory, 512 x 8 bits of RAM, and 13 I/O ports in a 20-pin LSSOP package. The operating voltage range is 3 V to 5 V, and the device is supplied in tape-and-reel packaging for automated assembly. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, timers, and communication peripherals on one integrated circuit. The R5F21142SP belongs to the R8C/Tiny family of 16-bit embedded processors. It provides the basic control functions needed for compact industrial, consumer, appliance, and embedded-control products without requiring a separate processor and external interface components. Key features include a 20 MHz R8C CPU core, 8 KB of flash memory for program storage, 512 x 8 bits of SRAM, and 13 general-purpose I/O ports. The 3 V to 5 V supply range supports both 3.3 V and 5 V system architectures. An internal oscillator is specified, while the 20-LSSOP package measures approximately 4.40 mm in width and supports compact, surface-mount PCB construction. The silicon-gate CMOS implementation combines the R8C/Tiny CPU core with embedded flash memory and a low pin count. Its 16-bit architecture and instruction set are intended for embedded-control workloads where deterministic control, compact firmware, and low board area are more important than application-processor graphics performance. Program storage is sufficient for boot logic, state machines, communication handling, and peripheral coordination. Typical uses include small motor and actuator controllers, sensor-conditioning systems, appliance control panels, industrial sequencers, temperature controllers, and compact embedded-control modules. The 13 available I/O ports can support digital inputs, output functions, and external interfaces where the selected board configuration does not require more pins. Firmware and peripheral allocation must be checked against the complete manufacturer datasheet before assigning functions. Designers should follow the manufacturer’s recommended application circuit for power, decoupling, reset, clock, and programming connections. The 3 V to 5 V operating range and 20 MHz speed limit must both be respected when selecting external components and programming tools. Because this R8C/1x/14 group is intended for customers already using the product family, new projects should evaluate the manufacturer-recommended RL78/G12 series rather than assuming a feature-equivalent pin-compatible replacement. This product page consolidates the confirmed R5F21142SP#W4 specifications, sourcing information, package details, lifecycle guidance, and design considerations. It also distinguishes the verified 20-LSSOP device from recommended new-design families, helping engineers assess fit without implying that a cross-family controller is a drop-in replacement.

طلب عرض سعر اتصل بنا
R5F21143SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics
R5F21143SP#U0

R5F21143SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

The Renesas Electronics R5F21143SP#U0 is a 16-bit R8C/1x/14-series microcontroller operating at up to 20 MHz, with 12 KB of flash memory, in a 20-pin LSSOP package. It is designed for 3 V and 5 V embedded-control systems that require efficient instruction execution, compact packaging, and dedicated firmware support. The R8C/1x/14 group is a legacy product line recommended only for customers that have already adopted it. An R8C microcontroller is a single-chip embedded controller combining a processor core, flash program memory, data memory, timers, serial interfaces, and I/O resources. The R8C/1x/14 family belongs to the broader Renesas M16C and R8C/Tiny lineage of 16-bit microcomputers. Its CISC-style instruction architecture provides compact code execution for embedded products, while the 20 MHz operating rate supports responsive control of peripherals and communication tasks. The target device provides 12 KB of flash memory and a maximum clock frequency of 20 MHz. These characteristics make it suitable for compact consumer products, industrial controllers, instrument subsystems, and legacy equipment in which a modest code-memory budget and low pin count are more important than a large application-specific peripheral set. The manufacturer describes the family as using a high-performance silicon-gate CMOS process and an R8C/Tiny Series CPU core. The R5F21143SP#U0 is offered in a 20-pin plastic molded LSSOP package, which supports compact PCB construction while exposing the microcontroller's principal ports and control signals. Its operating supply range is 3 V to 5 V according to distributor product information, allowing integration into conventional embedded-control rails. Exact RAM, peripheral, timing, and electrical-limit details should be confirmed against the manufacturer datasheet before schematic capture or firmware qualification. Typical applications include small appliance controllers, sensor-conditioning systems, industrial automation modules, programmable control panels, and communication-enabled embedded products. Because this MCU belongs to a non-promotion family, it is most appropriate for maintaining an established design rather than starting a new platform when a currently promoted Renesas MCU family can satisfy the requirements. Engineers should preserve the established R8C/1x/14 board layout, clock configuration, memory map, and development-tool workflow when replacing an existing component. Review the pin-description table and electrical characteristics in the manufacturer datasheet before assigning I/O, selecting bypass capacitors, or changing the 3 V or 5 V supply configuration. This page consolidates the exact orderable MPN, core operating parameters, package identity, application guidance, lifecycle considerations, and same-family replacement options into an engineering-focused reference for legacy R8C/1x/14 designs.

طلب عرض سعر اتصل بنا
R5F21144SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics
R5F21144SP#U0

R5F21144SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

Renesas Electronics R5F21144SP#U0 is a 16-bit R8C/14 microcontroller operating at up to 20 MHz with 16 KB of flash program memory in a 20-pin LSSOP package. The device operates from 2.7 V to 5.5 V, provides a 10-bit four-channel ADC, and offers 13 general-purpose I/O pins. These characteristics make it suitable for compact embedded control systems requiring efficient 16-bit processing, on-chip flash storage, and mixed-signal measurement. A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripheral interfaces, and I/O ports on one integrated circuit. The R5C family belongs to the embedded-processor hierarchy and uses the R8C/Tiny Series CPU core. Compared with an 8-bit MCU, a 16-bit controller can perform arithmetic and address larger data structures more efficiently, while retaining the low cost, low power, and real-time control characteristics expected from a dedicated embedded controller. Key features include a 20 MHz maximum operating frequency, 16 KB flash program memory organized as 16K x 8, a four-channel 10-bit ADC, and an operating temperature range of -20°C to +85°C. Flash memory allows firmware to be programmed and updated without an external programmable memory device. The 20-LSSOP outline also supports compact PCB layouts where component density and a moderate pin count are important. The R8C/14 architecture is implemented using a silicon-gate CMOS process and incorporates a high-performance R8C/Tiny Series CPU core with instruction-efficient 16-bit operations. The target includes 13 I/O pins according to its listed device data, leaving sufficient interface capacity for digital control, communications, and analog monitoring. Exact clock, timer, and peripheral configurations should be confirmed against the manufacturer datasheet before final clock-tree and peripheral allocation. Typical uses include compact industrial controllers, consumer appliances, sensor-interfaces, programmable timers, and embedded equipment requiring modest computation and local data acquisition. The four ADC channels are useful for monitoring temperature, position, pressure, or analog control signals, while the 13 I/O pins support switches, indicators, actuators, and serial or bus-connected peripherals. Designers should plan decoupling, clock routing, programming access, and mixed-signal grounding carefully. Place input and output capacitors close to the supply pins, route analog inputs away from switching nodes, and preserve clear programming access. Because this R8C/14 group is a non-promotion family for existing adopters, new projects should also evaluate Renesas's recommended RL78/G12 path when long-term new-design support is a priority. This product page consolidates the verified device specifications, package information, lifecycle position, application guidance, and same-family drop-in options into a practical engineering reference. It also highlights the trade-off between preserving an installed R8C/14 design and moving a completely new design to the manufacturer-recommended RL78/G12 family.

طلب عرض سعر اتصل بنا
R5F21152SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics
R5F21152SP#U0

R5F21152SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

Renesas Electronics R5F21152SP#U0 is a 16-bit R8C microcontroller IC operating at up to 20 MHz, with 8 KB of flash memory organized as 8K x 8 and housed in a 20-pin LSSOP package. The device supports 3 V to 5 V operation and uses the R8C/Tiny-series CPU core. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device dedicated to embedded control. The R5C family belongs to the broader hierarchy of embedded processors and microcontrollers, allowing one compact component to execute control logic and manage digital interfaces, timing, communications, and system inputs. The R5F21152SP#U0 combines a 16-bit processing architecture with a 20 MHz operating speed and 8 KB of flash memory. Its 3 V to 5 V operating range supports both lower-voltage and 5 V industrial or consumer equipment. The 20-pin LSSOP outline offers a gull-wing, surface-mount format with a body width of approximately 4.40 mm, making it suitable for compact embedded-control boards. The R5C is a high-performance CISC core with an instruction set designed for efficient embedded operation and uses a silicon-gate CMOS process. Compared with a general-purpose processor, the device concentrates control-oriented functions into a smaller package, reducing the number of external components needed for basic sequencing, signal handling, and programmable logic tasks. Typical uses include industrial controllers, sensor-conditioning systems, motor-control interfaces, appliance control boards, and compact data-acquisition products. A designer can select the R5F21152SP#U0 when an application requires a 16-bit control architecture, 20 MHz performance, 8 KB of embedded flash, and a compact 20-pin package. Before finalizing the PCB, verify the complete pin assignment, clock configuration, programming interface, and external-component requirements against the manufacturer datasheet. Pay particular attention to supply decoupling and unused-pin handling, because correct implementation at these constraints is essential for reliable operation and repeatable firmware behavior. This page combines the core R5F21152SP#U0 specifications, package characteristics, sourcing guidance, and drop-in replacement analysis to support faster engineering decisions. It also highlights what must be checked when considering a substitute, particularly pin compatibility, flash capacity, operating voltage, clock rate, and peripheral configuration.

طلب عرض سعر اتصل بنا