R5F10WMGAFB#50 - 128KB Flash 24MHz RL78/L13 MCU 80-LQFP | Renesas
MPN: R5F10WMGAFB#50 ✓ نشطR5F10WMGAFB#50 نظرة عامة
A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, peripherals, and I/O. The RL78 is a 16-bit RISC architecture developed by Renesas that emphasizes ultra-low active and standby current consumption, making it well-suited for battery-powered and energy-harvesting products. The L13 sub-family adds a segment LCD controller/driver with three voltage-generation methods (external resistor divider, capacitive split, internal voltage boost), allowing direct connection to a wide range of segment LCD panels without external charge-pump circuitry.
Key features include 128KB flash (128K x 8), 8KB SRAM, 24MHz maximum CPU clock, an integrated segment LCD driver supporting up to many segments, multiple low-power modes (HALT, STOP, SNOOZE), and rich peripheral set including 10-bit ADC, timers, UART/SPI/I2C, real-time clock, and DMA. The 80-LQFP package provides ample I/O for keypad, sensor, and display expansion.
The RL78 core uses a Harvard-style architecture with a 3-stage pipeline and unified register bank, achieving high code density and 1.6 DMIPS/MHz class performance. Three LCD driving voltage generation methods support different panel sizes and power budgets, allowing designers to optimize for cost or efficiency.
Typical applications include home appliance LCD displays (washing machines, microwaves, induction cookers), measurement devices (digital multimeters, blood pressure monitors, smart meters), industrial control panels, and any battery-powered product that drives a character or segment LCD.
When designing with this MCU, ensure the LCD voltage generation method (external divider, capacitive split, or boost) is selected in software to match the panel and power budget. The 80-LQFP's exposed pad should be soldered to a sufficient ground pour for thermal and electrical stability.
This page synthesizes distributor pricing, RL78/L13 family drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet.
بدائل مباشرة لـ R5F10WMGAFB#50 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع R5F10WMGAFB#50 (نفس عامل الشكل والبصمة) — يختلف في ADC, Package, Operating Temperature, Core Architecture.
R5F10WMGAFB#30
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←R5F10WMGAFB#70
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
R5F10WLGAFB#50
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
R5F10WPGAFB#50
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
PIC18F87J11-I/PT
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←R5F10WMGAFB#50 الحدود القصوى والخصائص الكهربائية
| Series | RL78/L13 |
| Core Processor | RL78 16-bit |
| Core Size | 16-Bit |
| Maximum CPU Clock | 24 MHz |
| Program Memory Size | 128 KB (128K x 8) FLASH |
| RAM Size | 8 KB |
| العلبة | 80-LQFP (12x12 mm) |
| نوع التركيب | Surface Mount |
| درجة حرارة التشغيل | -40C to +85C |
| Integrated LCD Driver | Yes (segment LCD, supports external divider / capacitive split / internal voltage boost) |
| ADC | 10-bit |
| Connectivity | CSI, I2C, UART, SPI |
| Peripherals | LCD, PWM, Real-Time Clock, DMA, Timers, Watchdog |
| حالة RoHS | Compliant |
تكوين أطراف R5F10WMGAFB#50
| دبوس 1 | P10/ANI0/SEG0/COM0 — Port 1 / ADC input / LCD segment 0 / LCD common 0 |
| دبوس 2 | P11/ANI1/SEG1/COM1 — Port 1 / ADC input / LCD segment 1 / LCD common 1 |
| دبوس 3 | P12/ANI2/SEG2/COM2 — Port 1 / ADC input / LCD segment 2 / LCD common 2 |
| دبوس 4 | P13/ANI3/SEG3/COM3 — Port 1 / ADC input / LCD segment 3 / LCD common 3 |
| دبوس 5 | P14/ANI4/SEG4/COM4 — Port 1 / ADC input / LCD segment 4 / LCD common 4 |
| دبوس 6 | P15/ANI5/SEG5/COM5 — Port 1 / ADC input / LCD segment 5 / LCD common 5 |
| دبوس 7 | P16/ANI6/SEG6/COM6 — Port 1 / ADC input / LCD segment 6 / LCD common 6 |
| دبوس 8 | P17/ANI7/SEG7/COM7 — Port 1 / ADC input / LCD segment 7 / LCD common 7 |
| دبوس 9 | VDD — Power supply |
| دبوس 10 | VSS — Ground |
| دبوس 11 | P30/SEG8/COM8 — Port 3 / LCD segment 8 / LCD common 8 |
| دبوس 12 | P31/SEG9/COM9 — Port 3 / LCD segment 9 / LCD common 9 |
| دبوس 13 | P32/SEG10/COM10 — Port 3 / LCD segment 10 / LCD common 10 |
| دبوس 14 | P33/SEG11/COM11 — Port 3 / LCD segment 11 / LCD common 11 |
| دبوس 15 | P34/SEG12/COM12 — Port 3 / LCD segment 12 / LCD common 12 |
| دبوس 16 | P35/SEG13/COM13 — Port 3 / LCD segment 13 / LCD common 13 |
| دبوس 17 | P36/SEG14/COM14 — Port 3 / LCD segment 14 / LCD common 14 |
| دبوس 18 | P37/SEG15/COM15 — Port 3 / LCD segment 15 / LCD common 15 |
| دبوس 19 | P40/SEG16/COM16 — Port 4 / LCD segment 16 / LCD common 16 |
| دبوس 20 | P41/SEG17/COM17 — Port 4 / LCD segment 17 / LCD common 17 |
| دبوس 21 | P42/SEG18/COM18 — Port 4 / LCD segment 18 / LCD common 18 |
| دبوس 22 | P43/SEG19/COM19 — Port 4 / LCD segment 19 / LCD common 19 |
| دبوس 23 | P44/SEG20/COM20 — Port 4 / LCD segment 20 / LCD common 20 |
| دبوس 24 | P45/SEG21/COM21 — Port 4 / LCD segment 21 / LCD common 21 |
| دبوس 25 | P46/SEG22/COM22 — Port 4 / LCD segment 22 / LCD common 22 |
| دبوس 26 | P47/SEG23/COM23 — Port 4 / LCD segment 23 / LCD common 23 |
| دبوس 27 | P50/SEG24/COM24 — Port 5 / LCD segment 24 / LCD common 24 |
| دبوس 28 | P51/SEG25/COM25 — Port 5 / LCD segment 25 / LCD common 25 |
| دبوس 29 | P52/SEG26/COM26 — Port 5 / LCD segment 26 / LCD common 26 |
| دبوس 30 | P53/SEG27/COM27 — Port 5 / LCD segment 27 / LCD common 27 |
| دبوس 31 | P54/SEG28/COM28 — Port 5 / LCD segment 28 / LCD common 28 |
| دبوس 32 | P55/SEG29/COM29 — Port 5 / LCD segment 29 / LCD common 29 |
| دبوس 33 | P56/SEG30/COM30 — Port 5 / LCD segment 30 / LCD common 30 |
| دبوس 34 | P57/SEG31/COM31 — Port 5 / LCD segment 31 / LCD common 31 |
| دبوس 35 | P60/SCLA0/SEG32 — Port 6 / I2C clock / LCD segment 32 |
| دبوس 36 | P61/SDAA0/SEG33 — Port 6 / I2C data / LCD segment 33 |
| دبوس 37 | P62/RXD0/SEG34 — Port 6 / UART RXD0 / LCD segment 34 |
| دبوس 38 | P63/TXD0/SEG35 — Port 6 / UART TXD0 / LCD segment 35 |
| دبوس 39 | P64/SEG36 — Port 6 / LCD segment 36 |
| دبوس 40 | P65/SEG37 — Port 6 / LCD segment 37 |
| دبوس 41 | P66/SEG38 — Port 6 / LCD segment 38 |
| دبوس 42 | P67/SEG39 — Port 6 / LCD segment 39 |
| دبوس 43 | VDD — Power supply |
| دبوس 44 | VSS — Ground |
| دبوس 45 | P70/SCLA1/KR0 — Port 7 / I2C clock / key return 0 |
| دبوس 46 | P71/SDAA1/KR1 — Port 7 / I2C data / key return 1 |
| دبوس 47 | P72/KR2 — Port 7 / key return 2 |
| دبوس 48 | P73/KR3 — Port 7 / key return 3 |
| دبوس 49 | P74/KR4 — Port 7 / key return 4 |
| دبوس 50 | P75/KR5 — Port 7 / key return 5 |
| دبوس 51 | P76/KR6 — Port 7 / key return 6 |
| دبوس 52 | P77/KR7 — Port 7 / key return 7 |
| دبوس 53 | P80/SEG40/COM0 — Port 8 / LCD segment 40 / LCD common 0 |
| دبوس 54 | P81/SEG41/COM1 — Port 8 / LCD segment 41 / LCD common 1 |
| دبوس 55 | P82/SEG42/COM2 — Port 8 / LCD segment 42 / LCD common 2 |
| دبوس 56 | P83/SEG43/COM3 — Port 8 / LCD segment 43 / LCD common 3 |
| دبوس 57 | P84/SEG44/COM4 — Port 8 / LCD segment 44 / LCD common 4 |
| دبوس 58 | P85/SEG45/COM5 — Port 8 / LCD segment 45 / LCD common 5 |
| دبوس 59 | P86/SEG46/COM6 — Port 8 / LCD segment 46 / LCD common 6 |
| دبوس 60 | P87/SEG47/COM7 — Port 8 / LCD segment 47 / LCD common 7 |
| دبوس 61 | P90/SEG48/COM8 — Port 9 / LCD segment 48 / LCD common 8 |
| دبوس 62 | P91/SEG49/COM9 — Port 9 / LCD segment 49 / LCD common 9 |
| دبوس 63 | P92/SEG50/COM10 — Port 9 / LCD segment 50 / LCD common 10 |
| دبوس 64 | P93/SEG51/COM11 — Port 9 / LCD segment 51 / LCD common 11 |
| دبوس 65 | P94/SEG52/COM12 — Port 9 / LCD segment 52 / LCD common 12 |
| دبوس 66 | P95/SEG53/COM13 — Port 9 / LCD segment 53 / LCD common 13 |
| دبوس 67 | P96/SEG54/COM14 — Port 9 / LCD segment 54 / LCD common 14 |
| دبوس 68 | P97/SEG55/COM15 — Port 9 / LCD segment 55 / LCD common 15 |
| دبوس 69 | PA0/SEG56 — Port A / LCD segment 56 |
| دبوس 70 | PA1/SEG57 — Port A / LCD segment 57 |
| دبوس 71 | PA2/SEG58 — Port A / LCD segment 58 |
| دبوس 72 | PA3/SEG59 — Port A / LCD segment 59 |
| دبوس 73 | RESET — Reset input (active low) |
| دبوس 74 | TEST — Test pin (connect to VSS in user mode) |
| دبوس 75 | X1 — Crystal oscillator input |
| دبوس 76 | X2 — Crystal oscillator output |
| دبوس 77 | EXCLK — External clock input |
| دبوس 78 | VDD — Power supply |
| دبوس 79 | VSS — Ground |
| دبوس 80 | EPAD — Exposed thermal pad (connect to ground) |
التطبيقات النموذجية
R5F10WMGAFB#50 مناسب لـ 6 التطبيقs: Home Appliance LCD Display (Washing Machines, Microwaves), Smart Electricity / Water / Gas Meters, Medical Measurement Devices (Blood Pressure Monitors, Thermometers), Industrial Control Panels and HMI, Remote Controls and Wireless Sensor End Nodes, Battery-Powered Measurement Instruments (DMMs, Environmental Sensors).
Home Appliance LCD Display (Washing Machines, Microwaves)
The R5F10WMGAFB#50's integrated segment LCD driver with three voltage-generation methods and ultra-low standby current make it ideal for the user-interface panels of washing machines, microwave ovens, and induction cookers. The MCU's 128KB flash and 24MHz RL78 core are sufficient to drive a 4x40 segment display, scan a keypad matrix, and manage relay/triac control loops while remaining within tight EMC and energy budgets. Designers select the capacitive-split LCD mode for medium-size panels to minimize external component count and achieve typical standby current below 5 uA, meeting IEC 62301 household-appliance standby limits.
موصى به
Smart Electricity / Water / Gas Meters
For smart metering, the R5F10WMGAFB#50 drives the segment LCD readout, samples pulse inputs from metering ICs, manages battery-backed RTC operation, and handles wireless M-Bus or RF communication to the concentrator. The RL78's SNOOZE mode allows ADC sampling and UART reception without full CPU wakeup, achieving years of battery life on a single lithium cell. The internal voltage-boost LCD mode enables the segment display to operate directly from a 3V battery without external charge pumps, reducing BOM cost. The MCU's 80-LQFP provides sufficient GPIO for keypad, tamper switch, and optical communication.
موصى به
Medical Measurement Devices (Blood Pressure Monitors, Thermometers)
In battery-powered medical devices, the R5F10WMGAFB#50 provides precise sensor signal conditioning via 10-bit ADC, drives the segment LCD with low operating noise, and runs the pump/valve control loop for cuff inflation. The RL78's low active current (typ. < 5 mA at 24MHz) and sub-uA STOP-mode standby allow months of battery life per set of alkaline cells. The integrated segment LCD driver eliminates the need for a separate LCD chip, reducing PCB area and BOM. Designers should verify IEC 60601-1 medical safety isolation requirements at the system level when the MCU directly drives user-accessible electrodes.
موصى به
Industrial Control Panels and HMI
The R5F10WMGAFB#50 drives segment-LCD HMI panels in industrial controllers, PLC expansion modules, and inverter status displays. Its 24MHz RL78 core handles Modbus RTU communication over UART, scans digital inputs at 1 kHz, and refreshes a 4x40 or 6x40 segment display via the integrated LCD controller. The -40C to +85C operating range covers most industrial cabinet environments, while the 80-LQFP package allows up to 70+ GPIO for push-button inputs, LED indicators, and encoder feedback. The internal voltage-boost LCD mode simplifies panel design at low bus voltages (24V industrial rails bucked to 3.3V locally).
موصى به
Remote Controls and Wireless Sensor End Nodes
For RF remote controls and IoT sensor end nodes, the R5F10WMGAFB#50 handles button scanning, sub-GHz RF protocol timing, and segment-LCD status display in a single chip. The RL78's STOP mode draws <1 uA, so a coin-cell-powered remote can last multiple years. The integrated segment LCD driver displays battery status, channel, and settings without an external LCD chip. Designers pair the MCU with an SPI-controlled sub-GHz transceiver for proprietary or Wireless M-Bus links. The 80-LQFP package is suitable for larger remotes with full keypads and displays.
موصى به
Battery-Powered Measurement Instruments (DMMs, Environmental Sensors)
Digital multimeters, clamp meters, and environmental monitors benefit from the R5F10WMGAFB#50's low-power operation, integrated segment LCD, and 10-bit ADC for sensor readout. The MCU drives a 4x40 or larger segment display showing voltage, current, temperature, and humidity readings; runs autoranging and peak-detection algorithms in firmware; and maintains calibrated accuracy over the -40C to +85C range. The internal voltage-boost LCD mode enables operation from a single 1.5V AA cell via boost converter, eliminating the need for a separate display driver. Designers should add input protection (TVS, PTC) at the measurement terminals per IEC 61010.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ R5F10WMGAFB#50 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | R5F10WMGAFB#30 | R5F10WMGAFB#70 | R5F10WLGAFB#50 | PIC18F87J11-I/PT |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Microchip Technology |
| Package | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) |
| Core / Architecture | RL78 16-bit | RL78 16-bit | RL78 16-bit | RL78 16-bit | PIC18 8-bit (functional alternative, pinout differs) |
| Maximum CPU Clock | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 48 MHz (PIC18) |
| Integrated Segment LCD Driver | Yes (3 voltage methods) | Yes (3 voltage methods) | Yes (3 voltage methods) | Yes (3 voltage methods) | No integrated LCD (functional alternative, pinout differs) |
أبرز الفروقات
- Three selectable LCD driving voltage generation methods (مقابلPIC18F87J11-I/PT)
- Lower active and standby power consumption (مقابلPIC18F87J11-I/PT)
- Pin-compatible family of variants for design flexibility (مقابلPIC18F87J11-I/PT)
ملاحظات التصميم
Estimated: At VDD=3.3V and CPU active at 24MHz, the RL78/L13 core draws approximately 5 mA (typ.). To minimize current, set the system clock divider to the lowest frequency that meets display refresh and task deadlines. Use SNOOZE mode for periodic ADC sampling and UART reception without waking the CPU - the RL78/L13 hardware manual specifies typical SNOOZE current of 0.5 mA with peripherals running. STOP mode current is below 1 uA per the RL78/L13 datasheet, ideal for battery-powered meters.
Place the bypass capacitor (1uF ceramic) as close as possible to the VDD/VSS pins, with the ground via directly under the IC's exposed thermal pad to minimize ground bounce. For LCD-driven designs, route the segment and common lines away from noisy switching nodes (DC-DC converters, relay coils) to prevent display ghosting. Add a guard trace around the crystal oscillator pins (X1, X2) and keep them away from the LCD panel interconnect to avoid display flicker.
Three common pitfalls: (1) Selecting the wrong LCD voltage generation mode in the LCD mode register - this prevents the segment LCD from displaying correctly at low VDD. Always verify the VLCD voltage with the panel's datasheet Vopr spec. (2) Forgetting to disable the on-chip debug (OCD) pins in user firmware can cause the TEST pin to interfere with normal reset behavior. (3) Exceeding the RL78 flash endurance spec (typically 1000 erase/write cycles per block) by writing to EEPROM emulation blocks too frequently - use wear-leveling or a separate EEPROM IC for high-write applications.
معلومات الامتثال
RoHS and lead-free compliance confirmed by Renesas product page and major distributors. The R5F10WMGAFB#50 is industrial grade (-40C to +85C) and NOT AEC-Q100 qualified for automotive applications - consult the RL78/L13 automotive variants for AEC-Q100 options.
