6EDL7141XUMA1 vs 2EDL8034G4CXTMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ 6EDL7141XUMA1 بواسطة Infineon و 2EDL8034G4CXTMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | 6EDL7141XUMA1 | 2EDL8034G4CXTMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Motor Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Three-phase gate driver IC (smart gate driver) | — |
| البنية الطوبولوجية | Three half-bridge drivers (high-side + low-side) | — |
| جهد التغذية التشغيلي | 5.5 V to 60 V (recommended) | — |
| Peak Gate Drive Current | 1.5 A source / 1.5 A sink | — |
| Number of Half-Bridges | 3 | — |
| Drive Type | Non-Inverting | — |
| Programmable Drive Voltage | Yes (configurable via SPI) | — |
| Integrated Current Sense Amplifiers | 3 (bi-directional low-side, programmable gain) | — |
| R_DSON Sensing | Supported via internal phase-node connections | — |
| Current Sense Output Compatibility | 3.3 V and 5 V logic | — |
| Communication Interface | SPI (digital configuration, >50 parameters) | — |
| Integrated Bootstrap Diodes | Yes | — |
| Integrated Charge Pump | Yes | — |
| العلبة | PG-VQFN-48-78 (7x7 mm power QFN with exposed pad) | PG-VDSON-10-2 (DSN-10) with exposed pad |
| نوع التركيب | Surface Mount | Surface Mount |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | — |
| مستوى MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| حالة RoHS | Compliant (per Infineon product page) | — |
| Driver Type | — | Half-Bridge (High-Side / Low-Side) |
| Configuration | — | Non-Inverting |
| Bootstrap Voltage (Max) | — | 120 V |
| Peak Source Current | — | 3 A |
| Peak Sink Current | — | 4 A |
| عدد المخارج | — | 2 |
| Rise Time (Typical) | — | [DATA_NEEDED: rise time ns] |
| Fall Time (Typical) | — | [DATA_NEEDED: fall time ns] |
| Propagation Delay (Typical) | — | [DATA_NEEDED: propagation delay ns] |
| Input Logic Compatibility | — | 3.3 V / 5 V |
| VCC Supply Voltage | — | [DATA_NEEDED: VCC range V] |
| UVLO Protection | — | Yes (VCC and VBS) |
| Isolation Type | — | Junction-isolated (level-shifted) |
| ESD Rating (HBM) | — | [DATA_NEEDED: ESD HBM kV] |
| درجة حرارة الوصلة التشغيلية | — | -40 C to +125 C |
| Lead-Free / RoHS | — | Yes (per Infineon product page) |