AD621BNZ vs AD620BNZ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ AD621BNZ بواسطة Analog Devices و AD620BNZ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | AD621BNZ | AD620BNZ |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Supply Voltage Range | ±2.3 V to ±18 V | ±2.3 V to ±18 V |
| العلبة | 8-pin PDIP | 8-pin PDIP |
| Input Offset Voltage | 125 µV typical | 15 µV |
| Bandwidth | 800 kHz typical | 1 MHz |
| Slew Rate | 1.2 V/µs typical | 1.2 V/µs |
| Common-Mode Rejection Ratio | 120 dB to 130 dB, condition dependent | — |
| Gain | 10 or 100, pin-strappable | — |
| نوع الخرج | Single-ended | — |
| Input Bias Current | 1 nA listed for AD621BNZ comparison | [DATA_NEEDED: input bias current] |
| Operating Voltage | ±2.3 V to ±18 V | — |
| Internal Gain Setting | Internal resistor gain | — |
| ESD Protection | Yes | — |
| نوع التركيب | Through-hole | Through-hole |
| حالة RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| تيار التغذية | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode range] |
| نطاق جهد الخرج | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage range] |
| Reference Input Range | [DATA_NEEDED: reference input range] | — |
| Amplifier Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 circuit |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | 1 external resistor |
| Power Class | — | Low-power instrumentation amplifier |
| Input Offset Voltage Accuracy | — | [DATA_NEEDED: input offset voltage accuracy] |