ADM202JN vs MAX202IN مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ADM202JN بواسطة Analog Devices و MAX202IN بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | ADM202JN | MAX202IN |
|---|---|---|
| العلامة التجارية | Analog Devices | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | Obsolete | Unknown |
| Product Type | Dual RS-232 line driver/receiver transceiver | Dual RS-232 line driver/receiver |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Transmission Rate | 120 kB/s | — |
| جهد التغذية | Single 5 V | 5 V |
| Charge-Pump Capacitor | 0.1 µF | — |
| RS-232 Output Levels | ±10 V | — |
| RS-232 Standard Compatibility | TIA/EIA-232-E and V.28 | — |
| On-Board DC-DC Converter | Yes | — |
| Duplex Mode | Full duplex | — |
| العلبة | 16-PDIP | — |
| نوع التركيب | Through hole | — |
| درجة حرارة التشغيل | 0 °C to 70 °C | — |
| Supply Range | 4.5 V to 5.5 V | — |
| Driver Slew Rate | Fast driver slew rates; numerical value not provided | — |
| ESD Protection | 15 kV mentioned in a public product-document snippet; test conditions not provided | ±15 kV human-body model |
| معدل البيانات | — | 120 kbit/s |
| Number of Driver Channels | — | 2 |
| Number of Receiver Channels | — | 2 |
| RS-232 Output Level | — | ±9 V |
| Charge-Pump Capacitors | — | External 0.1 µF capacitors |
| Interface Standard | — | TIA/EIA-232-F and ITU V.28 |
| External Components | — | Four small external charge-pump capacitors |
| Supply Operation | — | 5 V VCC |
| ESD Scope | — | RS-232 bus pins, including GND |
| Line Driver Output | — | ±9 V |
| Communication Mode | — | Asynchronous serial communication |
| Host Interface | — | Asynchronous communication controller |
| Mounting / Package | — | [DATA_NEEDED: exact package and pin count] |
| نطاق درجة حرارة التشغيل | — | [DATA_NEEDED: operating temperature range] |
| حالة RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |