ADM222AN vs MAX211CDB مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ADM222AN بواسطة Analog Devices و MAX211CDB بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | ADM222AN | MAX211CDB |
|---|---|---|
| العلامة التجارية | Analog Devices | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-232 transceiver | Multichannel RS-232 line driver/receiver |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Transmission Rate | 200 kbps | — |
| جهد التغذية | 5 V | 5 V |
| Charge-Pump Capacitor | 0.1 µF | — |
| DC-DC Converter | On-board | — |
| Output Swing | 9 V | — |
| Receiver Maximum Input Voltage | 30 V | — |
| Driver and Receiver Configuration | 2/2 transceiver | — |
| Shutdown Function | Yes | — |
| العلبة | 18-pin PDIP | 28-pin SSOP, 5.30 mm width |
| نوع التركيب | Through-hole | Surface mount |
| Technology | CMOS | — |
| Interface Standard | RS-232 | — |
| Compliance Standard | EIA-232-E and V.28 | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| تيار التغذية | [DATA_NEEDED: supply current] | [DATA_NEEDED: operating supply current] |
| Driver Count | — | 4 |
| Receiver Count | — | 5 |
| Maximum Data Rate | — | 120 kbit/s |
| Driver Output Swing | — | ±9 V |
| RS-232 Bus Pin ESD Protection | — | ±15 kV, human-body model |
| Standards Support | — | TIA/EIA-232-F and ITU V.28 |
| Shutdown Feature | — | Three driver outputs can be placed in shutdown |
| Power-Supply Topology | — | Single 5 V supply with integrated charge-pump circuitry |
| Shutdown Supply Current | — | Low; exact value [DATA_NEEDED: shutdown supply current] |
| Driver Input Logic Levels | — | [DATA_NEEDED: driver input logic thresholds] |
| Receiver Output Logic Levels | — | [DATA_NEEDED: receiver output logic levels] |
| حالة RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |