ADM232LAR vs ADM232AARWZ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ADM232LAR بواسطة Analog Devices و ADM232AARWZ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | ADM232LAR | ADM232AARWZ |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| جهد التغذية | 5 V (single supply) | 5 V |
| Transceiver Configuration | 2 drivers / 2 receivers (2/2) | 2 driver and 2 receiver channels |
| معدل البيانات | 120 kB/s | — |
| Interface Standard Compliance | EIA-232-E and V.28 | — |
| Output Swing | 9 V with 5 V supply | — |
| On-Board DC-DC Converters | Yes | — |
| Required External Capacitors | 1 uF | — |
| Shutdown | Low power shutdown mode | — |
| Receiver Supply Current in Shutdown | 1 uA (receivers active in shutdown) | — |
| Receiver Input Voltage Tolerance | 30 V | — |
| العلبة | 16-lead SOIC (SOIC-16) | 16-lead SOIC, wide body |
| عدد الدبابيس | 16 | — |
| نوع التركيب | Surface Mount | Surface mount |
| Technology | CMOS | — |
| Automotive Qualification (AEC-Q100) | not_applicable | — |
| تيار التغذية | [DATA_NEEDED: typical and maximum supply current] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | [DATA_NEEDED: driver output current] | [DATA_NEEDED: driver output current] |
| حالة RoHS | [DATA_NEEDED: RoHS status for ADM232LAR] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status for ADM232LAR] | [DATA_NEEDED: REACH status] |
| Product Type | — | Dual RS-232 line driver/receiver transceiver |
| Number of Transmitters | — | 2 |
| Number of Receivers | — | 2 |
| Interface Standard | — | RS-232 |
| Maximum Transmission Rate | — | 200 kB/s |
| External Charge-Pump Capacitor | — | 0.1 µF |
| Lead Count | — | 16 |
| Supply Configuration | — | Single supply |
| Input and Output Logic Levels | — | [DATA_NEEDED: input and output logic voltage levels] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Power-Supply Current | — | [DATA_NEEDED: power-supply current] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |