ATSAM4SD32BA-AU vs ATSAM4S8CB-CFN مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ATSAM4SD32BA-AU بواسطة Microchip Technology و ATSAM4S8CB-CFN بواسطة Microchip Technology. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Microchip Technology
ATSAM4SD32BA-AU - 120MHz Cortex-M4 MCU 2MB Flash | Microchip
ATSAM4SD32BA-AU ✓ نشطMicrochip Technology
ATSAM4S8CB-CFN - 120MHz Cortex-M4 MCU, 512KB Flash, 100-VFBGA | Microchip
ATSAM4S8CB-CFN ✓ نشطمقارنة المواصفات
| المعامل | ATSAM4SD32BA-AU | ATSAM4S8CB-CFN |
|---|---|---|
| العلامة التجارية | Microchip Technology | Microchip Technology |
| الفئة | Microcontrollers | Microcontrollers |
| حالة دورة الحياة | نشط | نشط |
| Core | ARM Cortex-M4 with DSP, Thumb-2 | ARM Cortex-M4 with FPU |
| أقصى تردد للساعة | 120 MHz | 120 MHz |
| Instruction Cache | 2 Kbytes | — |
| Flash Memory | 2 MB (2M x 8) | — |
| SRAM | 160 KB | 128 KB |
| Memory Protection Unit (MPU) | Yes | — |
| جهد التغذية | 1.2 V core / 3.3 V I/O | — |
| درجة حرارة التشغيل | -40C to +85C (Industrial) | — |
| العلبة | 64-LQFP (10x10 mm) | 100-ball VFBGA, 7x7 mm, 0.65 mm pitch |
| نوع التركيب | Surface Mount | Surface Mount (BGA) |
| ADC | 12-bit, up to 24 channels | 12-bit, up to 16 channels, 1 Msps |
| DAC | 12-bit, 1 channel | 2x 12-bit DAC |
| USB | USB 2.0 FS Device + FS Host/Device | USB 2.0 Full-Speed Device with on-chip transceiver |
| CAN | 2x CAN 2.0A/B | 2x CAN 2.0A/B controllers |
| External Bus Interface | Yes (EBI for SRAM/SDRAM) | 16-bit Static Memory Controller (EBI) |
| DMA | Peripheral DMA + 16-channel Central DMA | — |
| مستوى MSL | 3 (168 hours) | — |
| حالة RoHS | Compliant | Compliant |
| Core Architecture | — | ARM 32-bit RISC |
| Program Memory (Flash) | — | 512 KB (512K x 8) |
| Supply Voltage Range | — | 1.62 V to 3.6 V |
| Operating Temperature (Industrial) | — | -40C to +85C |
| Operating Temperature (Green, MRL B) | — | -40C to +105C |
| Timers | — | Multiple 16-bit and 32-bit timers, PWM, RTC |
| Communication Interfaces | — | UART/USART, SPI, TWI (I2C), I2S, USB, CAN |
| Supply Current (Active, 100 MHz) | — | approximately 30 mA |
| Supply Current (Backup, RTC) | — | approximately 3 uA at 1.8 V |
| MSL (Moisture Sensitivity) | — | MSL3 (per BGA package) |