BTG7003A1EPWXUMA2 vs BTG70013A1ESWXUMA2 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTG7003A1EPWXUMA2 بواسطة Infineon و BTG70013A1ESWXUMA2 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ نشطمقارنة المواصفات
| المعامل | BTG7003A1EPWXUMA2 | BTG70013A1ESWXUMA2 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Switch Type | High-Side Power Switch | — |
| Number of Channels | 1 | — |
| Configuration | 1:1 N-Channel | — |
| Maximum Continuous Load Current | 15.7 A | — |
| Operating Voltage Range | 6 V to 18 V | [DATA_NEEDED: VBB min/max] |
| Load Dump Tolerance | 40 V | — |
| Idle Mode Quiescent Current | 50 µA | — |
| On-Resistance R_DS(on) | 10 mΩ (typ) | — |
| Control Input | Active High | — |
| Wire Protection | Integrated I²t | Selectable integrated I²t function |
| Functional Safety | ISO 26262 compliant | ISO 26262-compliant |
| العلبة | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-24-32 (TSDSO-EP-24, exposed pad) |
| نوع التركيب | Surface Mount | Surface Mount |
| درجة حرارة التشغيل | -40C to +150C (TJ) | [DATA_NEEDED: Tj / TA range] |
| حالة RoHS | Compliant | RoHS Compliant (per Newark listing) |
| Product Family | — | PROFET Wire Guard 12V |
| Part Number | — | BTG70013A-1ESW (tape & reel: BTG70013A1ESWXUMA2) |
| الوظيفة | — | Single-channel high-side power switch / smart power switch |
| Switch Topology | — | High-side, 1:1 |
| Output Transistor | — | N-Channel power MOSFET |
| Maximum Load Current | — | 26.6 A |
| Nominal Supply Voltage | — | 12 V (automotive) |
| On-State Resistance RDS(on) | — | [DATA_NEEDED: typ RDS(on) in mΩ] |
| Logic Input | — | Active High |
| Idle / Key-off Current | — | < 60 µA (active supply in key-off mode); 50 µA per Infineon product page |
| Wake Feature | — | IDL pin for microcontroller wake-up |
| Embedded Protection | — | Over-current, over-voltage, over-temperature, reverse battery, loss of ground, short circuit |
| عدد المخارج | — | 1 |
| Diagnostic Output | — | Status / current-sense feedback pin |
| Application Domain | — | Automotive 12 V body electronics, industrial 12 V/24 V power distribution |