BTS3028SDRATMA1 vs BTS70402EPGXUMA1 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ BTS3028SDRATMA1 بواسطة Infineon و BTS70402EPGXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

مقارنة المواصفات

المعامل BTS3028SDRATMA1 BTS70402EPGXUMA1
العلامة التجارية Infineon Infineon
الفئة Power MOSFET Drivers Power MOSFET Drivers
حالة دورة الحياة نشط نشط
Product Type Smart Low-Side Power Switch —
البنية الطوبولوجية 1:1 N-Channel, single channel —
تيار الخرج (الأقصى) 5 A —
On-Resistance RDS(ON) 28 mΩ (typ.) —
Load Voltage (max) 60 V (load-dump rated) —
جهد التغذية التشغيلي 5 V to 28 V (typ. 13.5 V) —
Logic Input Voltage (IN) Logic-level, 3.3 V/5 V compatible —
العلبة PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) PG-TSDSO-14 (exposed thermal pad)
نوع التركيب Surface Mount Surface Mount
درجة حرارة التشغيل -40 °C to +150 °C (junction) —
Protection Features Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Status Output Open-drain diagnostic flag —
Automotive Qualification AEC-Q100 —
حالة RoHS Compliant —
مستوى MSL [DATA_NEEDED: MSL rating] —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
الوظيفة — Smart High-Side Power Switch
Number of Channels — 4
تكوين الخرج — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
نطاق درجة حرارة التشغيل — -40 °C to +150 °C junction
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر