BTS500151TADATMA2 vs BTS428L2 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ BTS500151TADATMA2 بواسطة Infineon و BTS428L2 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

مقارنة المواصفات

المعامل BTS500151TADATMA2 BTS428L2
العلامة التجارية Infineon Infineon
الفئة Power MOSFET Drivers Power MOSFET Drivers
حالة دورة الحياة نشط نشط
Switch Type High-Side Power Switch (PROFET+ 12V / HIC-PROFET) —
عدد المخارج 1 —
Internal MOSFET Configuration N-Channel —
Continuous Load Current 33 A —
Output Peak Current Limit 39 A (typ) —
Input Voltage Range (Vbb) -0.3 V to 28 V (operating typically 5 V to 18 V) —
On-State Resistance (RDS(on)) [DATA_NEEDED: RDS(on) at 25C and Tj=150C] 60 mΩ (typical)
نطاق درجة حرارة التشغيل -40C to +150C (junction) -40 °C to +150 °C
العلبة PG-TO-263-7-10 (D2PAK, 6 leads + tab) PG-TO252-5-11 (TO-252 / DPAK, 5 leads)
نوع التركيب Surface Mount Surface Mount
Protection Features Over-current, Over-temperature, Over-voltage, Reverse Battery, Ground Loss, Open-Load detection —
Diagnostic Output Yes (Status pin) —
مستوى MSL [DATA_NEEDED: MSL rating] —
حالة RoHS Compliant —
Automotive Qualification AEC-Q100 qualified —
عدد الدبابيس 7 (6 + tab) —
Product Type — Smart High-Side Power Switch (Classic PROFET)
البنية الطوبولوجية — Single-channel high-side N-channel MOSFET with charge pump
Nominal Operating Voltage — 24 V (automotive 12 V/24 V board net)
Maximum Continuous Load Current — 5.8 A
Number of Channels — 1
Status Feedback — Yes (dedicated status pin)
الحماية من فرط التيار — Yes (integrated)
Short-Circuit Protection — Yes (integrated)
Overtemperature Protection — Yes (integrated thermal shutdown)
Overvoltage Protection — Yes (load-dump tolerant)
Reverse Battery Protection — Yes (integrated)
Standby Current — Low standby current (green/RoHS-compliant device)
RoHS Compliance — Compliant (Pb-free, green product, IPC/JEDEC J-STD-020)

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر