CP2101R vs CP2101-GM مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ CP2101R بواسطة Silicon Labs و CP2101-GM بواسطة Silicon Labs. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | CP2101R | CP2101-GM |
|---|---|---|
| العلامة التجارية | Silicon Labs | Silicon Labs |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | USB-to-UART bridge controller | USB-to-UART bridge controller |
| USB Interface | USB 2.0 | USB 2.0 full-speed |
| جهد التغذية | 3 V to 3.6 V | — |
| Serial Interface | UART | Asynchronous UART |
| Protocol | USB | — |
| العلبة | 28-MLP (5 x 5 mm) | 28-QFN |
| Case / Package | 28-VFQFN exposed pad | — |
| Packaging | Cut Tape (CT) | — |
| Interface Function | USB 2.0 UART interface | — |
| Device Category | I/O controller interface IC | — |
| USB Speed | [DATA_NEEDED: USB operating speed] | — |
| Maximum UART Data Rate | [DATA_NEEDED: maximum UART baud rate] | — |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | — |
| UART Signal Levels | [DATA_NEEDED: UART signal-level specification] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| حالة RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| المقاومة الحرارية | [DATA_NEEDED: exposed-pad thermal resistance] | — |
| Package Dimensions | — | 5 mm x 5 mm |
| External USB Components | — | None required |
| Integrated Functions | — | USB 2.0 full-speed function controller, USB transceiver, oscillator, EEPROM, UART |
| Modem Control | — | Full modem-control signals |
| Primary Use | — | Updating RS-232 designs to USB |
| Interface Category | — | USB bridge / USB-to-UART interface |
| Operating Supply | — | 3 V to 3.6 V |
| UART Protocol | — | Asynchronous serial data bus |
| Integration Level | — | Highly integrated single-chip bridge |
| External USB Transceiver | — | Not required |
| External Oscillator | — | Integrated on the CP2101 family per manufacturer-linked documentation |
| External EEPROM | — | Integrated on the CP2101 family per manufacturer-linked documentation |
| نوع التركيب | — | Surface mount |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |