CP2108-B03-GMR vs CP2108-B01-GMR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ CP2108-B03-GMR بواسطة Silicon Labs و CP2108-B01-GMR بواسطة Silicon Labs. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | CP2108-B03-GMR | CP2108-B01-GMR |
|---|---|---|
| العلامة التجارية | Silicon Labs | Silicon Labs |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| الوظيفة | USB to Quad UART Bridge Controller | USB to Quad UART Bridge Controller |
| Protocol | USB 2.0 Full-Speed | — |
| UART Channels | 4 | — |
| جهد التغذية | 3.0 V to 3.6 V | — |
| تيار التغذية | [DATA_NEEDED: typical operating current in mA] | — |
| Baud Rate | 300 bps to 921.6 kbps (per UART) | — |
| Data Bits | 5, 6, 7, 8 bits | — |
| Parity | None, Even, Odd, Mark, Space | — |
| Stop Bits | 1, 1.5, 2 | — |
| Flow Control | Hardware (RTS/CTS) and Software (XON/XOFF) per UART | Hardware (RTS/CTS, DTR/DSR) and software (XON/XOFF) |
| Modem Control Signals | Full (DTR, DSR, RTS, CTS, DCD, RI) per channel | — |
| Internal Oscillator | Yes (crystal-less USB operation) | 48 MHz (no external crystal required) |
| Internal LDO | 3.3 V output, up to 100 mA for external logic | — |
| On-chip EEPROM | Yes (VID, PID, serial number, product string, GPIO configuration) | — |
| GPIO | Configurable multi-IO pins (revision B03 feature) | — |
| ESD Protection | [DATA_NEEDED: HBM IEC 61000-4-2 rating on USB lines] | — |
| درجة حرارة التشغيل | -40 C to +85 C | -40C to +85C |
| العلبة / الحالة | 64-QFN (9 mm x 9 mm) | — |
| Supplier Device Package | 64-QFN 9 x 9 | — |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | [DATA_NEEDED: MSL Level] |
| حالة RoHS | Compliant (per manufacturer page) | Compliant |
| USB Specification | — | USB 2.0 Full-Speed (12 Mbps) |
| Number of UART Channels | — | 4 |
| UART Data Rate | — | 300 baud to 2 Mbaud |
| Supply Voltage (VBUS) | — | 3.0 V to 5.25 V |
| Internal LDO Output | — | 3.3 V (on-chip regulator) |
| I/O Voltage (VIO) | — | 1.8 V to 3.3 V (level shifters) |
| GPIO Pins | — | 16 (GPIO.0 to GPIO.15) |
| On-chip OTP Memory | — | 512 bytes |
| العلبة | — | 64-pin QFN EP, 9 mm x 9 mm |
| Drivers | — | Royalty-free VCP drivers (Windows, macOS, Linux) |