INA111BU vs INA110KU مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ INA111BU بواسطة Texas Instruments و INA110KU بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
INA111BU - 2 MHz FET-Input Instrumentation Amplifier | Texas Instruments
INA111BU ✓ نشطمقارنة المواصفات
| المعامل | INA111BU | INA110KU |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Instrumentation amplifier | Monolithic FET-input instrumentation amplifier |
| Number of Amplifiers | 1 circuit | — |
| Input Transistor Type | FET-input | — |
| Gain-Bandwidth Product | 2 MHz | — |
| Slew Rate | 17 V/us | 17 V/us |
| Common-Mode Rejection Ratio | 106 dB | [DATA_NEEDED: common-mode rejection ratio] |
| Input Bias Current | Less than 20 pA | [DATA_NEEDED: input bias current] |
| Supply Voltage Range | 6 V to 18 V | 12 V to 36 V |
| Maximum Supply Voltage | 18 V | — |
| نطاق درجة حرارة التشغيل | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| العلبة | 16-pin SOIC | 16-pin SOIC (SOL-16) |
| نوع التركيب | Surface mount | Surface mount |
| Input Protection | [DATA_NEEDED: input protection rating] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 1 mV |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Gain-Setting Resistor | [DATA_NEEDED: gain-setting resistor] | — |
| تيار السكون | [DATA_NEEDED: quiescent current] | — |
| كثافة الضجيج | [DATA_NEEDED: noise density] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | Not applicable | — |
| Number of Circuits | — | 1 circuit |
| Gain Settings | — | 1, 10, 100, 200, and 500 V/V |
| Bandwidth | — | 2.5 MHz |
| Settling Time | — | 4 us to 0.01% |
| Input Impedance | — | Very high input impedance |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Package Width | — | 7.50 mm |
| Architecture | — | Current-feedback circuit topology |
| Input Stage | — | Laser-trimmed FET input stage |