INA122U vs INA122UA مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ INA122U بواسطة Texas Instruments و INA122UA بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
INA122UA - 36V Micropower Instrumentation Amplifier | Texas Instruments
INA122UA ✓ نشطمقارنة المواصفات
| المعامل | INA122U | INA122UA |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Two-op-amp design | Two-op-amp design |
| Supply Voltage Range | 2.2 V to 36 V | — |
| Single-Supply Operation | 2.2 V to 36 V | — |
| Dual-Supply Operation | ±18 V | — |
| تيار السكون | 60 µA typical | 60 uA |
| Common-Mode Range | (V−) − 0.1 V | — |
| Output Swing | Rail-to-rail output swing | Rail-to-rail |
| Offset Voltage | 250 µV maximum | — |
| Offset Drift | 3 µV/°C maximum | — |
| Noise | Low noise | [DATA_NEEDED: noise specification] |
| Circuit Count | 1 circuit | — |
| العلبة | 8-SOIC | 8-pin SOIC |
| Terminal Count | 8 terminals | — |
| نوع التركيب | Surface mount | Surface mount |
| Application Category | Portable medical and data acquisition | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| مستوى MSL | [DATA_NEEDED: MSL level] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Number of Channels | — | 1 circuit |
| Single-Supply Voltage Range | — | 2.2 V to 36 V |
| Dual-Supply Voltage Range | — | +/-18 V |
| Gain-Bandwidth Product | — | 120 kHz |
| Input Common-Mode Range | — | Approximately 0.1 V below the negative supply |
| Maximum Offset Voltage | — | 250 uV |
| Maximum Offset Drift | — | 3 uV/degree Celsius |
| Gain Range | — | [DATA_NEEDED: programmable gain range] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |