INA125U vs INA125P مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ INA125U بواسطة Texas Instruments و INA125P بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
INA125P - Precision Bridge Amplifier with 10V Reference | Texas Instruments
INA125P ✓ نشطمقارنة المواصفات
| المعامل | INA125U | INA125P |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Instrumentation amplifier with precision voltage reference | Instrumentation amplifier with precision voltage reference |
| Channel Count | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 36 V | — |
| Maximum Supply Voltage | 36 V | — |
| Gain Range | 4 V/V to 10,000 V/V | — |
| Gain Setting | Single external resistor | — |
| تيار السكون | 460 µA | 460 µA typical |
| Input Offset Voltage | 250 µV maximum | — |
| Input Offset Drift | 2 µV/°C maximum | — |
| Voltage Reference | 10 V | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Bandwidth | 150 kHz | 150 kHz |
| Noise at 1kHz | 38 nV/√Hz typical | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.02 V/µs |
| Sleep Mode | Yes | Supported |
| العلبة | 16-pin SOIC | 16-pin plastic DIP, through-hole |
| نوع التركيب | Surface mount | Through-hole |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Circuits | — | 1 circuit |
| Maximum Input Offset Voltage | — | 250 µV |
| Maximum Input Offset Drift | — | 2 µV/°C |
| جهد التغذية | — | 2.7 V to 36 V |
| Precision Voltage Reference | — | 10 V |
| Temperature Grade | — | Industrial |
| Gain | — | [DATA_NEEDED: gain configuration and range] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |