ITS4140NHUMA1 vs BSP752RXUMA2 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ITS4140NHUMA1 بواسطة Infineon و BSP752RXUMA2 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | ITS4140NHUMA1 | BSP752RXUMA2 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| الوظيفة | High-Side Power Switch / Load Driver | — |
| البنية الطوبولوجية | 1:1 (Input to Output) | High-side, 1:1 N-channel |
| Switch Type | N-Channel (vertical, integrated) | — |
| Output Current (Continuous) | 200 mA | — |
| Supply Voltage Range (Vbb) | 4.9 V to 60 V | [DATA_NEEDED: Vbb min/max operating range] |
| Load Dump Withstand | [DATA_NEEDED: load-dump transient rating per ISO 7637] | — |
| On-Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) in ohms] | — |
| Short-Circuit Protection | Yes (current limit + thermal shutdown) | — |
| Overload Protection | Yes | Yes (current limitation) |
| Overvoltage Protection | Yes (including load dump) | — |
| Inductive Load Clamping | Yes (active negative-voltage clamp at output) | — |
| Diagnostic Output | Yes (status/IN pin feedback) | — |
| نطاق درجة حرارة التشغيل | -40 C to +125 C | -40C to +150C (junction) |
| العلبة | PG-SOT223-4 (3+Tab) | PG-DSO-8-6 (DSO-8-6) |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | 1 (per JEDEC J-STD-020) | — |
| حالة RoHS | Compliant | Compliant |
| Automotive Qualified | [DATA_NEEDED: AEC-Q100 grade] | — |
| Product Type | — | Smart High-Side Power Switch |
| Continuous Load Current | — | 1.3 A |
| On-State Resistance (RON) | — | [DATA_NEEDED: typical RON value in ohms at 25C] |
| Load Dump Protection | — | Yes (integrated) |
| Short Circuit Protection | — | Yes |
| الإيقاف الحراري | — | Yes (with auto-restart) |
| Reverse Battery Protection | — | Yes |
| Open-Load Detection (OFF state) | — | Yes (via external resistor) |
| Status Feedback Pin | — | Yes |
| Fast Demagnetization | — | Yes (for inductive loads) |
| Qualification | — | AEC-Q100 (automotive grade) |