KSZ9031RNXUB-VAO vs KSZ9031RNXIA مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ KSZ9031RNXUB-VAO بواسطة Microchip Technology و KSZ9031RNXIA بواسطة Microchip Technology. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Microchip Technology
KSZ9031RNXUB-VAO - Gigabit Ethernet Transceiver, AEC-Q100, WQFN-48 | Microchip
KSZ9031RNXUB-VAO ✓ نشطMicrochip Technology
KSZ9031RNXIA - Gigabit Ethernet PHY Transceiver RGMII | Microchip
KSZ9031RNXIA ✓ نشطمقارنة المواصفات
| المعامل | KSZ9031RNXUB-VAO | KSZ9031RNXIA |
|---|---|---|
| العلامة التجارية | Microchip Technology | Microchip Technology |
| الفئة | Interface ICs | Ethernet Transceivers |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Ethernet Physical Layer Transceiver (PHY) | Ethernet Transceiver (PHY) |
| معدل البيانات | 10/100/1000 Mbps (triple-speed) | 10/100/1000 Mbps |
| Standards Supported | 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) | 10Base-T, 100Base-TX, 1000Base-T |
| MAC Interface | RGMII (Reduced Gigabit Media Independent Interface) | RGMII |
| Cable Type | CAT-5 UTP (unshielded twisted pair) | CAT-5 UTP |
| العلبة | 48-pin WQFN (7x7 mm), lead-free | 48-QFN (7x7 mm) |
| نوع التركيب | Surface Mount | Surface Mount |
| درجة حرارة التشغيل | -40C to +85C (automotive AEC-Q100 grade) | -40C to +85C (Industrial) |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| جهد التغذية | [DATA_NEEDED: supply voltage] | — |
| Power Consumption (Active) | [DATA_NEEDED: typical active power] | — |
| Power Consumption (Energy-Detect) | ~75 mW when cable not attached | — |
| Reference Clock Output | 125 MHz | — |
| Wake-on-LAN | Yes, with custom-packet detection | Yes |
| On-chip Termination Resistors | Yes (integrated MDI termination) | — |
| LED Outputs | Programmable (link/activity/speed) | — |
| Loopback Modes | Remote and local loopback | — |
| Baseline Wander Correction | Integrated | — |
| Adaptive Equalization | Integrated | — |
| حالة RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Number of Ports | — | 1 Port |
| Supply Voltage (VDDIO) | — | 1.8V / 2.5V / 3.3V |
| Analog Supply Voltage | — | 3.3V |
| AEC-Q100 Qualified | — | Yes (Automotive) |
| Jumbo Frame Support | — | Up to 9.6 KB |
| Auto-MDI/MDIX | — | Yes |
| LinkMD Cable Diagnostics | — | Yes |
| EEE (Energy Efficient Ethernet) | — | Yes |
| MDIO Management Interface | — | Yes |
| Reference Clock | — | 25 MHz |