LM2902KVQDRQ1 vs LM2902QDRG4Q1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LM2902KVQDRQ1 بواسطة Texas Instruments و LM2902QDRG4Q1 بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
LM2902KVQDRQ1 - 26V Quad Automotive Op Amp | Texas Instruments
LM2902KVQDRQ1 ✓ نشطمقارنة المواصفات
| المعامل | LM2902KVQDRQ1 | LM2902QDRG4Q1 |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Amplifier Count | 4 channels | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Input Offset Voltage | 2 mV | [DATA_NEEDED: input offset voltage] |
| Common-Mode Rejection Ratio | 80 dB | 80 dB |
| Slew Rate | 0.5 V/µs | 0.5 V/µs |
| Input Bias Current | -0.5 µA | -0.5 µA |
| نطاق درجة حرارة التشغيل | -55 °C to +125 °C | — |
| Nominal Test Supply Voltage | 5 V | — |
| عدد الدبابيس | 14 pins | — |
| العلبة | 14-SOIC | 14-SOIC, 3.90 mm width |
| نوع التركيب | Surface mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 compliant |
| Operating Mode | Single supply or split supply | — |
| Frequency Compensation | Internal | — |
| Amplifier Type | General purpose | General Purpose |
| حالة RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Standard Packaging Quantity | [DATA_NEEDED: standard packaging quantity] | — |
| Number of Circuits | — | 4 circuits |
| Number of Amplifiers | — | 4 amplifiers |
| جهد التغذية | — | 5 V |
| درجة حرارة التشغيل | — | -40 °C to 125 °C |
| Packaging | — | Tape and Reel |
| Human Body Model ESD | — | >2 kV |
| Machine Model ESD | — | >200 V |
| Charged Device Model ESD | — | 2 kV |
| Single-Supply Operation | — | 5 V |
| Output Current | — | [DATA_NEEDED: output current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |