LM2902MT vs LM2902QPWRQ1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LM2902MT بواسطة Texas Instruments و LM2902QPWRQ1 بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | LM2902MT | LM2902QPWRQ1 |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Number of Circuits | 4 | — |
| Amplifier Type | General Purpose Operational Amplifier | — |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Input Offset Voltage | 2 mV (typical) | 2 mV |
| Supply Voltage Range | up to 26 V | — |
| Output Voltage Swing | +/-13 V / 26 V | — |
| Operating Mode | Single supply or split supply | — |
| Internal Compensation | Yes (internally frequency compensated) | — |
| العلبة | 14-TSSOP | 14-pin TSSOP (PW) |
| نوع التركيب | Surface Mount | Surface mount |
| Packaging | Tube | — |
| حالة RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Supply Current (per amplifier) | [DATA_NEEDED: supply current] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| مستوى MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Operational Amplifier Count | — | 4 circuits |
| Product Type | — | Quad general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Operating Supply Range | — | [DATA_NEEDED: operating supply voltage range] |
| Supply Configuration | — | Single supply or split supply |
| Amplifier Architecture | — | High-gain, internally frequency-compensated |
| Automotive Qualification | — | AEC-Q100 qualified |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |