LM2902PWRE4 vs LM2902YPT مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LM2902PWRE4 بواسطة Texas Instruments و LM2902YPT بواسطة STMicroelectronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
LM2902PWRE4 - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments
LM2902PWRE4 ✓ نشطمقارنة المواصفات
| المعامل | LM2902PWRE4 | LM2902YPT |
|---|---|---|
| العلامة التجارية | Texas Instruments | STMicroelectronics |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Amplifier Channels | 4 | — |
| Gain Bandwidth Product | 1.2 MHz | — |
| Input Offset Voltage | 2 mV | — |
| Supply Voltage Range (Single) | 3 V to 26 V | — |
| Supply Voltage (Dual) | +/-13 V | — |
| العلبة | 14-TSSOP (PW) | — |
| نوع التركيب | Surface Mount | Surface mount |
| Packaging | Tape & Reel (PWR) | — |
| Amplifier Type | General Purpose | Low-power general-purpose operational amplifier |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.4 V/µs |
| Input Bias Current | [DATA_NEEDED: input bias current] | 20 nA |
| Quiescent Current (per amp) | [DATA_NEEDED: quiescent current] | — |
| Output Current per Channel | [DATA_NEEDED: output current] | — |
| حالة RoHS | Compliant (E4 suffix denotes lead-free) | Compliant |
| Product Series | LM2902 | — |
| Drop-in Upgrade Path | LM2902B / LM324B (3V to 36V, lower offset) | — |
| Number of Amplifiers | — | 4 circuits |
| Internal Frequency Compensation | — | Yes |
| Gain-Bandwidth Product | — | 1.3 MHz |
| Typical Input Offset Voltage | — | 7 mV |
| نوع الخرج | — | Push-pull |
| Supply Voltage Range | — | 3 V to 36 V |
| نطاق درجة حرارة التشغيل | — | -40 °C to +125 °C |
| Package Type | — | 14-pin TSSOP |
| عدد الدبابيس | — | 14 pins |
| Automotive and Industrial Design | — | Yes |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Current | — | [DATA_NEEDED: output current rating] |
| تيار التغذية | — | [DATA_NEEDED: supply current per amplifier] |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |