LM2904ANG vs LM2904N مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LM2904ANG بواسطة onsemi و LM2904N بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | LM2904ANG | LM2904N |
|---|---|---|
| العلامة التجارية | onsemi | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | Obsolete | نشط |
| Number of Amplifier Circuits | 2 circuits | — |
| Amplifier Type | General-purpose operational amplifier | — |
| Supply Type | Single or split supply | — |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Slew Rate | 0.6 V/µs | [DATA_NEEDED: slew rate] |
| Common-Mode Input Range | Extends to ground/VEE | Extending to ground/VEE |
| Power Drain | Low | Low; numeric value [DATA_NEEDED: power drain] |
| العلبة | 8-PDIP, 0.300 inch pitch (7.62 mm) | 8-pin PDIP |
| نوع التركيب | Through-hole | Through-hole |
| Packaging Type | Tube | — |
| عدد الدبابيس | 8 pins | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current | [DATA_NEEDED: output current] | [DATA_NEEDED: output current] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Amplifier Count | — | 2 amplifiers |
| Product Family Supply Designation | — | 26 V |
| البنية الطوبولوجية | — | Dual independent operational amplifiers |
| Compensation | — | Internally frequency compensated |
| Supply Configuration | — | Single supply or split supply |
| نوع الخرج | — | Push-pull |
| Input Type | — | Differential |
| Product Classification | — | Standard general-purpose amplifier |
| AEC-Q100 Qualification | — | not_applicable |