LM2904D vs LM224DR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LM2904D بواسطة Texas Instruments و LM224DR بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
LM224DR - Quad General-Purpose Op Amp | Texas Instruments (Tape & Reel)
LM224DR ✓ نشطمقارنة المواصفات
| المعامل | LM2904D | LM224DR |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Number of Channels | 2 | — |
| Supply Voltage (Single) | 3 V to 26 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±13 V | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/us | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 2 mV (typical) | [DATA_NEEDED: input offset voltage] |
| Quiescent Current (per amplifier) | 500 uA (typical) | — |
| Total Supply Current | 0.7 mA (typical) | — |
| Common-Mode Input Range | Includes ground | [DATA_NEEDED: common-mode input voltage range] |
| Output Stage | Class AB | — |
| Input Stage Latch-Up | Latch-up free | — |
| Short-Circuit Protection | Internal | — |
| درجة حرارة التشغيل | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| العلبة | 8-SOIC (D) | 14-SOIC |
| نوع التركيب | Surface Mount | Surface mount |
| Amplifier Type | General Purpose | — |
| Product Type | — | Standard general-purpose operational amplifier |
| Number of Amplifier Circuits | — | 4 circuits |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current capability] |
| Noise | — | [DATA_NEEDED: noise specifications] |
| حالة RoHS | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |