LM358PE3 vs LM2904P مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LM358PE3 بواسطة Texas Instruments و LM2904P بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | LM358PE3 | LM2904P |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Amplifier Count | 2 independent channels | — |
| Product Type | Dual general-purpose operational amplifier | Dual operational amplifier |
| Supply Voltage Range | 3 V to 32 V | — |
| Gain-Bandwidth Product | 700 kHz | 700 kHz |
| Slew Rate | 0.3 V/µs | [DATA_NEEDED: slew rate] |
| تيار التغذية | 0.7 mA typical | [DATA_NEEDED: supply current] |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | [DATA_NEEDED: open-loop gain] |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| العلبة | 8-PDIP | 8-PDIP |
| Package Pin Count | 8 pins | — |
| Mounting Technology | Through-hole | — |
| حالة RoHS | Unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | Unknown | [DATA_NEEDED: REACH status] |
| Automotive Qualification | Not specified | — |
| Number of Amplifiers | — | 2 |
| Maximum Supply Voltage | — | 26 V |
| نوع التركيب | — | Through-hole |
| Product Classification | — | Standard general-purpose amplifier |
| Operating Supply Mode | — | Single or dual supply; [DATA_NEEDED: exact supply limits] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |