MAX3076EESD+T vs MAX3078EESA+ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX3076EESD+T بواسطة Analog Devices و MAX3078EESA+ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | MAX3076EESD+T | MAX3078EESA+ |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 2.97 V to 3.63 V | 2.97V to 3.63V |
| Maximum Data Rate | 16 Mbps | — |
| Driver Count | 1 | 1 |
| Receiver Count | 1 | 1 |
| ESD Protection | ±15 kV | ±15kV |
| Fail-Safe Receiver | Yes; logic-high output when receiver inputs are open or shorted | Logic-high output when receiver inputs are open or shorted |
| Hot-Swap Support | Yes | — |
| Interface Standards | RS-485 and RS-422 | RS-485 and RS-422 |
| العلبة | 14-pin narrow SOIC, 3.90 mm width | 8-pin SOIC |
| نوع التركيب | Surface mount | Surface mount |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | [DATA_NEEDED: common-mode rejection ratio] |
| Driver Output Protection | [DATA_NEEDED: driver output protection details] | — |
| تيار التغذية | [DATA_NEEDED: operating supply current] | — |
| حالة RoHS | unknown | [DATA_NEEDED: RoHS compliance status] |
| AEC-Q100 Qualification | not_applicable | — |
| Hot-Swap Capability | — | Supported |
| Unloaded Supply Current | — | 800µA |
| Supply Current With Drivers Disabled | — | 800µA when fully loaded |
| DigiKey Listing Package | — | 8-SOIC |
| Manufacturer Product Status | — | PRODUCTION |
| Manufacturer Data Sheet Revision | — | Rev. 5 |
| Differential Input Threshold | — | [DATA_NEEDED: differential input threshold] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |