MAX3232CD vs SP3232EP-L مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX3232CD بواسطة Texas Instruments و SP3232EP-L بواسطة Sipex. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
MAX3232CD - 2/2 RS-232 Transceiver, 250 kbit/s | Texas Instruments
MAX3232CD ✓ نشط
مقارنة المواصفات
| المعامل | MAX3232CD | SP3232EP-L |
|---|---|---|
| العلامة التجارية | Texas Instruments | Sipex |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Multichannel RS-232 line driver/receiver | RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V | +3.0 V to +5.5 V |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Maximum Data Rate | 250 kbit/s | — |
| Logic Compatibility | Accepts 5 V logic | — |
| Typical Supply Current | 300 µA | — |
| ESD Protection | ±15 kV | — |
| External Capacitors | Required charge-pump capacitors; datasheet application uses 0.1 µF capacitors | — |
| العلبة | 16-pin SOIC | 16-pin SSOP |
| نوع التركيب | Surface mount | Surface mount |
| درجة حرارة التشغيل | 0 °C to 70 °C | [DATA_NEEDED: operating temperature range] |
| RS-232 Standards | TIA/EIA-232-F and ITU V.28 | — |
| Lead Status | Lead-free | — |
| حالة RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Minimum Data Rate Under Full Load | — | 120 kbps |
| RS-232 Interoperability | — | Down to +2.7 V power source |
| Enhanced ESD Protection | — | ±15 kV |
| Compliance | — | True EIA/TIA-232-F standards from +3.0V to +5.5V power supply |
| Low-Power Shutdown | — | 1 µA with receivers active (SP3222) |
| عدد الدبابيس | — | 16 |
| تيار التغذية | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Levels | — | [DATA_NEEDED: driver output voltage levels] |
| Receiver Input Levels | — | [DATA_NEEDED: receiver input voltage thresholds] |
| Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |