MAX3488EESA+T vs MAX3488EESA+ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX3488EESA+T بواسطة Analog Devices و MAX3488EESA+ بواسطة Maxim Integrated. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Analog Devices
MAX3488EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488EESA+T ✓ نشطمقارنة المواصفات
| المعامل | MAX3488EESA+T | MAX3488EESA+ |
|---|---|---|
| العلامة التجارية | Analog Devices | Maxim Integrated |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| جهد التغذية | 3.3 V | 3.3 V |
| Operating Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | 12 Mbps |
| ESD Protection | ±15 kV | ±15 kV |
| Driver Count | 1 driver | 1 |
| Receiver Count | 1 receiver | 1 |
| Supported Standards | RS-485 and RS-422 | — |
| Driver Slew Rate | Slew-rate limited | Slew-rate limited |
| Communication Mode | Half-duplex | Half duplex |
| العلبة | 8-pin SOIC | 8-pin NSOIC |
| نوع التركيب | Surface mount | Surface mount |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| تيار السكون | [DATA_NEEDED: quiescent current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | [DATA_NEEDED: receiver input resistance] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Signal Type | — | True differential RS-485/RS-422 |
| درجة حرارة التشغيل | — | [DATA_NEEDED: operating temperature range] |
| تيار التغذية | — | [DATA_NEEDED: typical supply current] |
| Maximum Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |
| Maximum Receiver Output Voltage | — | [DATA_NEEDED: maximum receiver output voltage] |