MC33887PNB vs MC33887PEK مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MC33887PNB بواسطة NXP Semiconductors و MC33887PEK بواسطة NXP Semiconductors. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
NXP Semiconductors
MC33887PEK - 5A H-Bridge DC Motor Driver, 5-28V | NXP
MC33887PEK ⚠ آخر فرصة للشراءمقارنة المواصفات
| المعامل | MC33887PNB | MC33887PEK |
|---|---|---|
| العلامة التجارية | NXP Semiconductors | NXP Semiconductors |
| الفئة | Motor Drivers | Motor Drivers |
| حالة دورة الحياة | Obsolete | آخر فرصة للشراء |
| الوظيفة | H-Bridge motor driver with load current feedback | — |
| البنية الطوبولوجية | Monolithic H-Bridge, N-channel MOSFET output | — |
| Supply Voltage (V+) | 5 V to 28 V | — |
| Continuous Load Current | 5 A | — |
| Peak Load Current | [DATA_NEEDED: peak current] | — |
| RDS(ON) per MOSFET | [DATA_NEEDED: RDS(ON) value] | — |
| Current Sense Ratio | 1/375 (0.00266) | — |
| Current Sense Output (FB pin) | Ground-referenced analog | — |
| درجة حرارة التشغيل | -40 C to +125 C | -40 C to +125 C |
| Control Inputs | IN1, IN2 logic inputs | — |
| Sleep Mode | Yes (low quiescent current) | — |
| العلبة | 36-PWR QFN (9x9 mm) with exposed pad | 54-SOIC-EP (HSOP-54) with exposed thermal pad |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL rating] |
| Thermal Resistance (theta_JC) | [DATA_NEEDED: thermal resistance] | — |
| Charge Pump | Integrated | Internal (supports 100% duty cycle) |
| Protection Features | Thermal shutdown, short-circuit, undervoltage lockout | Thermal shutdown, cross-conduction prevention, internal current limit |
| حالة RoHS | Compliant (per NXP product page) | — |
| حالة دورة الحياة | No Longer Manufactured (NXP product page) | — |
| تكوين الخرج | — | H-Bridge (full bridge) |
| Motor Type | — | Brushed DC |
| Supply Voltage (VPWR/VCC) | — | 5 V to 28 V |
| Continuous Output Current | — | 5.0 A |
| Peak Output Current | — | 8.0 A (pulse) |
| RDS(on) per MOSFET (typ) | — | 120 mOhm at 25 C |
| Current Feedback Ratio | — | 1/375 of high-side load current |
| Sleep Mode Current | — | < 50 uA typical |
| Logic Input Compatibility | — | TTL / CMOS |
| PWM Frequency (recommended) | — | [DATA_NEEDED: PWM frequency max] |
| Thermal Resistance (junction-to-case) | — | approximately 1 C/W |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Lead-Free / RoHS | — | Lead-free; RoHS compliance per NXP product page |
| Tube Quantity | — | 27 per tube |