MC3486DR vs MC3487DR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MC3486DR بواسطة Texas Instruments و MC3487DR بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
MC3486DR - 4-Channel RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486DR UnknownTexas Instruments
MC3487DR - 4-Channel RS-422 Driver | Texas Instruments | 5V (Tape & Reel)
MC3487DR ⚠ آخر فرصة للشراءمقارنة المواصفات
| المعامل | MC3486DR | MC3487DR |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | Unknown | آخر فرصة للشراء |
| Product Type | Quadruple differential line receiver | Quadruple differential line driver |
| Number of Channels | 4 independent differential receivers | — |
| جهد التغذية | 5 V single supply | 5 V single supply |
| نوع الخرج | TTL-compatible 3-state outputs | — |
| Input Type | Differential | High-impedance input |
| Standards Supported | ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 | — |
| Output Enable Function | 3-state high-impedance output control | — |
| Transition Time | Fast transition times; exact value not provided | Fast transition time |
| العلبة | 16-pin SOIC | 16-pin SOIC, 0.154 inch body width, 3.90 mm |
| نطاق درجة حرارة التشغيل | 0°C to 70°C | — |
| Compatible Driver | MC3487 quadruple differential line driver | — |
| نوع التركيب | Surface mount | Surface mount |
| Logic Compatibility | TTL-compatible outputs | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Input Differential Voltage Range | [DATA_NEEDED: input differential voltage range] | — |
| Output High-Level Voltage | [DATA_NEEDED: output high-level voltage] | — |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Enable Pin Count | [DATA_NEEDED: enable pin count] | — |
| حالة RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Lead-Free Status | unknown | — |
| Number of Drivers | — | 4 |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Interface Standard | — | ANSI TIA/EIA-422-B and ITU Recommendation V.11 |
| Input Compatibility | — | TTL-compatible buffered input |
| Output State | — | 3-state, high-impedance output |
| Protection | — | Power-up and power-down protection |
| درجة حرارة التشغيل | — | 0 C to 70 C |
| Protocol | — | RS-422 |
| Driver Configuration | — | 4/0 |