MC3488ADG vs MC3488AD مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MC3488ADG بواسطة onsemi و MC3488AD بواسطة onsemi. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | MC3488ADG | MC3488AD |
|---|---|---|
| العلامة التجارية | onsemi | onsemi |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | Obsolete | نشط |
| Device Type | Dual RS-232/RS-423 line driver | Dual single-ended line driver |
| Supported Protocols | RS-232, RS-423 | — |
| Driver Count | 2 drivers | — |
| Receiver Count | 0 receivers | — |
| Supply Voltage Range | 10.8 V to 13.2 V | — |
| نطاق درجة حرارة التشغيل | 0 °C to 70 °C | [DATA_NEEDED: operating temperature range] |
| العلبة | 8-pin SOIC | 8-pin SOIC |
| نوع التركيب | Surface mount | Surface mount |
| Product Status | Obsolete | — |
| Description | Dual EIA-423/EIA-232D line driver | — |
| معدل البيانات | [DATA_NEEDED: data rate] | — |
| Output Voltage Levels | [DATA_NEEDED: output voltage levels] | [DATA_NEEDED: output voltage levels] |
| Input Logic Threshold | [DATA_NEEDED: input logic threshold] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| تيار التغذية | [DATA_NEEDED: supply current] | — |
| Short-Circuit Protection | [DATA_NEEDED: short-circuit protection] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Driver Channel Count | — | 2 |
| Supported EIA Standards | — | EIA-423 and EIA-232D |
| Supported CCITT Standards | — | X.26 and X.28 |
| Federal Standard Support | — | FIDS1030 |
| Adjustable Output Slew Rate | — | 1.0 V/us to 100 V/us |
| Minimum Output Load Resistance | — | Greater than 450 ohm |
| Signal Wave Shaping | — | Supported |
| عدد الأطراف | — | 8 |
| جهد التغذية | — | [DATA_NEEDED: supply voltage] |
| Input Logic Compatibility | — | [DATA_NEEDED: input logic compatibility] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| REACH Status | — | [DATA_NEEDED: REACH status] |