MC9S08PA60VQH vs MC9S08PA16VTJ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MC9S08PA60VQH بواسطة NXP Semiconductors و MC9S08PA16VTJ بواسطة NXP Semiconductors. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | MC9S08PA60VQH | MC9S08PA16VTJ |
|---|---|---|
| العلامة التجارية | NXP Semiconductors | NXP Semiconductors |
| الفئة | Microcontrollers | Microcontrollers |
| حالة دورة الحياة | نشط | NRND |
| Core Processor | S08 | — |
| Core Size | 8-bit | — |
| CPU Speed | 20 MHz | — |
| Program Memory Size | 60 KB (60K x 8) Flash | — |
| RAM Size | [DATA_NEEDED: RAM size] | — |
| EEPROM Size | 256 bytes (included on-chip) | — |
| Number of I/O | 57 | — |
| جهد التغذية | 2.7 V to 5.5 V | — |
| العلبة | 64-LQFP (14 x 14 mm) | 20-pin TSSOP |
| نوع التركيب | Surface Mount | Surface Mount (TSSOP) |
| Connectivity | I2C, LINbus, SPI, UART/USART | — |
| Peripherals | LVD, POR, PWM, WDT, Analog comparator | — |
| ADC | 12-channel (included) | On-chip SAR ADC (channel count [DATA_NEEDED: ADC channels]) |
| Timers | 8-bit and 16-bit timers + PWM | FlexTimer (PWM-capable, channel count [DATA_NEEDED: PWM channels]) |
| درجة حرارة التشغيل | -40 C to +105 C | -40 C to +105 C |
| حالة RoHS | Compliant | Compliant |
| مستوى MSL | 3 (168 hours) | — |
| Debug Interface | S08 BDM (background debug mode) | BDM (Background Debug Mode) |
| Core Architecture | — | HCS08L (S08 family) |
| عرض ناقل البيانات | — | 8 bit |
| Program Memory (Flash) | — | 16 KB |
| RAM | — | [DATA_NEEDED: RAM size in KB] |
| EEPROM (emulated) | — | Yes (in flash, configurable) |
| Maximum Bus Frequency | — | 20 MHz |
| Supply Voltage (VDD) | — | 2.7 V to 5.5 V |
| I/O Pins | — | Up to 18 GPIO |
| Analog Comparator | — | Yes |
| Interrupts | — | Up to 40 sources, 4-level nested |
| Low-Power Modes | — | Wait, Stop (low-power) |
| Watchdog | — | COP watchdog |
| Lead-Free / MSL | — | Lead-free; MSL [DATA_NEEDED: MSL level] |
| Tube Packaging Standard Qty | — | Per tube (qty [DATA_NEEDED: tube qty]) |