PCM5121PW vs PCM5122PWR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ PCM5121PW بواسطة Texas Instruments و PCM5122PWR بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
PCM5122PWR - 112dB Stereo Audio DAC | Texas Instruments (Tape & Reel)
PCM5122PWR ✓ نشطمقارنة المواصفات
| المعامل | PCM5121PW | PCM5122PWR |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | ADC/DAC | ADC/DAC |
| حالة دورة الحياة | نشط | نشط |
| Device Type | Stereo audio digital-to-analog converter | — |
| Dynamic Performance | 106 dB | — |
| Maximum Output Voltage | 2 V RMS | — |
| Interface Format | PCM | — |
| Supported Audio Word Lengths | 16 bit, 24 bit, 32 bit | — |
| Maximum Sampling Rate | 384 kHz | 384 kHz |
| Output Architecture | 2 V RMS DirectPath | DirectPath |
| DAC Architecture | Segment-DAC architecture | — |
| Audio Processing | Fixed audio processing | Fixed audio processing |
| Output Channels | 2 channels: OUTL and OUTR | — |
| Load Coupling Support | DC-coupled or AC-coupled loads | — |
| Out-of-Band Noise Improvement | Up to 20 dB lower than existing DAC technology | — |
| Clock Jitter Tolerance | Improved tolerance; numerical value not stated | — |
| العلبة | 28-pin TSSOP | 28-pin TSSOP (PW) |
| نوع التركيب | Surface mount | Surface mount |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 3.6 V |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | -25 °C to +85 °C |
| حالة RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Stereo audio digital-to-analog converter |
| تكوين الخرج | — | 2 channels |
| Dynamic Range | — | 112 dB |
| Maximum Output Amplitude | — | 2 V RMS |
| Digital Audio Resolution | — | Up to 32 bit |
| Digital Audio Interface | — | PCM interface |
| Control Interface | — | I2C and SPI |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: signal-to-noise ratio] |
| Total Harmonic Distortion plus Noise | — | [DATA_NEEDED: THD+N] |
| Power Consumption | — | [DATA_NEEDED: power consumption] |
| AEC-Q100 Qualification | — | unknown |