PN7160A1HN vs PN7160B1HN مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ PN7160A1HN بواسطة NXP Semiconductors و PN7160B1HN بواسطة NXP Semiconductors. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | PN7160A1HN | PN7160B1HN |
|---|---|---|
| العلامة التجارية | NXP Semiconductors | NXP Semiconductors |
| الفئة | RF Modules | RF Transceivers |
| حالة دورة الحياة | نشط | نشط |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | — |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | — |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | — |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| العلبة | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad |
| نوع التركيب | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | — |
| Moisture Sensitivity Level | MSL 3 | — |
| حالة RoHS | Compliant | Compliant |
| درجة حرارة التشغيل | -30 C to +85 C | -40 C to +85 C |
| الوظيفة | — | NFC Plug and Play Controller |
| الواجهة | — | NCI over SPI |
| Supported Standards | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum |
| Host Interface Supply | — | 1.65 V to 1.95 V |
| RF/Analog Supply | — | 3 V to 3.6 V |
| Integrated Firmware | — | Yes (NCI-compliant) |
| Reader/Writer Mode | — | Yes |
| Card Emulation Mode | — | Yes |
| Peer-to-Peer Mode | — | Yes |
| Host OS Support | — | Android, Linux, Windows |
| مستوى MSL | — | 1 |