PVG612PBF vs PVT312LSPBF مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ PVG612PBF بواسطة Infineon و PVT312LSPBF بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | PVG612PBF | PVT312LSPBF |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Relays | Relays |
| حالة دورة الحياة | نشط | نشط |
| Contact Form | SPST-NO (1 Form A) | — |
| Load Voltage Max | 60 V | — |
| Load Current Max (AC) | 1 A | — |
| Load Current Max (DC) | 2 A | — |
| On-State Resistance Max | 0.5 ohm | — |
| Isolation Voltage (Input to Output) | 4 kVrms | — |
| LED Forward Current (If) Typical | 25 mA | — |
| LED Forward Voltage (Vf) Typical | 1.4 V at 10 mA | — |
| Off-State Leakage Max | [DATA_NEEDED: off-state leakage current] | — |
| Turn-On Time Typical | [DATA_NEEDED: turn-on time] | — |
| Turn-Off Time Typical | [DATA_NEEDED: turn-off time] | — |
| Output Device | HEXFET Power MOSFET (N-channel) | — |
| نطاق درجة حرارة التشغيل | -40 C to +85 C | -40 C to +85 C |
| العلبة | 6-DIP (0.300 inch / 7.62 mm through-hole) | 6-SMD (0.300 inch / 7.62 mm DIP pitch) |
| نوع التركيب | Through Hole | Surface Mount (SMD) |
| مستوى MSL | Not Applicable (through-hole) | [DATA_NEEDED: MSL rating] |
| حالة RoHS | Compliant (Pb-free, PBF suffix) | Compliant (Pb-free suffix 'PbF') |
| Relay Type | — | Solid State Photo-Coupled Relay (Photorelay), SPST-NO (1 Form A) |
| تكوين الخرج | — | SPST-NO (1 Form A) |
| Load Voltage Rating (AC/DC) | — | 0 V to 250 V |
| Continuous Load Current (AC, 25 C) | — | 190 mA |
| Continuous Load Current (DC, 25 C) | — | 320 mA |
| On-Resistance (Max, 25 C) | — | 0.5 ohm |
| Input Control Current (Typ, turn-on) | — | 5 mA |
| Input Turn-Off Current (Max) | — | 0.25 mA |
| LED Forward Voltage (Typ, 5 mA) | — | 1.2 V |
| LED Reverse Voltage (Max) | — | 6 V |
| Turn-On Time (Max) | — | 2 ms |
| Turn-Off Time (Max) | — | 0.25 ms |
| Input-to-Output Isolation (Min) | — | 3750 Vrms |
| Capacitance Input-to-Output (Typ) | — | 1.0 pF |