S9S08DZ60F1MLC vs S9S08DZ96F2VLF مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ S9S08DZ60F1MLC بواسطة NXP Semiconductors و S9S08DZ96F2VLF بواسطة NXP Semiconductors. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
NXP Semiconductors
S9S08DZ96F2VLF - 8-bit MCU, 96KB Flash, 40MHz, CAN, USB | NXP
S9S08DZ96F2VLF ✓ نشطمقارنة المواصفات
| المعامل | S9S08DZ60F1MLC | S9S08DZ96F2VLF |
|---|---|---|
| العلامة التجارية | NXP Semiconductors | NXP Semiconductors |
| الفئة | Microcontrollers | Microcontrollers |
| حالة دورة الحياة | نشط | نشط |
| Core Architecture | HCS08 (enhanced HC08 with BGND) | — |
| CPU Speed | 40 MHz (20 MHz bus) | — |
| Program Flash | 60 KB (60K x 8) | — |
| RAM | 4 KB | 6 KB |
| EEPROM (emulated) | [DATA_NEEDED: EEPROM emulation size] | — |
| CAN Controller | MSCAN (CAN 2.0A/B), 1 channel | — |
| SCI/UART | 2 channels | — |
| SPI | 1 channel | — |
| I2C | 1 channel | — |
| Timers | [DATA_NEEDED: timer count and width] | Multiple PWM/MTIM/FTM timers (count [DATA_NEEDED: timer count]) |
| ADC | [DATA_NEEDED: ADC resolution and channel count] | Multi-channel 10-bit ADC (channel count [DATA_NEEDED: ADC channels]) |
| GPIO | [DATA_NEEDED: GPIO count] | — |
| Operating Voltage | [DATA_NEEDED: VDD range, typical 3.3V-5V] | — |
| درجة حرارة التشغيل | -40C to +125C (automotive grade) | — |
| العلبة | 32-LQFP (7x7 mm) | 48-pin LQFP (7 mm x 7 mm, 0.5 mm pitch) |
| Mask Set / Marking | M74K (MASK ONLY-AUTO) | — |
| نوع التركيب | Surface Mount | Surface Mount |
| حالة RoHS | [DATA_NEEDED: explicit RoHS status] | Compliant |
| مستوى MSL | [DATA_NEEDED: MSL rating] | — |
| Core | — | S08 (HCS08 instruction set) |
| عرض ناقل البيانات | — | 8-bit |
| Program Memory | — | 96 KB Flash |
| EEPROM / Emulated EEPROM | — | Available (size [DATA_NEEDED: EEPROM size]) |
| Maximum CPU Frequency | — | 40 MHz |
| Supply Voltage Range | — | 2.7 V to 5.5 V |
| نطاق درجة حرارة التشغيل | — | -40 C to +105 C (automotive) |
| CAN | — | 1x CAN 2.0 A/B controller |
| USB | — | 1x USB 2.0 Full-Speed device |
| LCD Driver | — | Yes (segment count [DATA_NEEDED: LCD segments]) |
| Debug Interface | — | Background Debug Mode (BDM) |
| Automotive Qualification | — | AEC-Q100 qualified |