SN65HVD70DGSR vs MAX3485ESA+ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SN65HVD70DGSR بواسطة Texas Instruments و MAX3485ESA+ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ نشط
مقارنة المواصفات
| المعامل | SN65HVD70DGSR | MAX3485ESA+ |
|---|---|---|
| العلامة التجارية | Texas Instruments | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-485 / RS-422 Transceiver | RS-485/RS-422 transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| معدل البيانات | Up to 400 kbps | — |
| IEC ESD Protection (Contact) | ±12 kV (IEC 61000-4-2) | — |
| HBM ESD Protection (Bus pins) | ±30 kV (HBM) | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Common-Mode Range | -7 V to +12 V | — |
| Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Driver Enable | Active-high | — |
| Receiver Enable | Active-low | — |
| Standby Current | < 5 µA (both disabled) | — |
| درجة حرارة التشغيل | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| العلبة | 10-pin VSSOP (DGS) with PowerPAD | 8-pin SOIC |
| نوع التركيب | Surface Mount | Surface mount |
| حالة RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| جهد التغذية | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate-limited true transceiver |
| Power Class | — | Low-power transceiver |
| Production Status | — | PRODUCTION |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| تيار التغذية | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |