SN75176 vs MAX485EPA+ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SN75176 بواسطة Texas Instruments و MAX485EPA+ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ نشطمقارنة المواصفات
| المعامل | SN75176 | MAX485EPA+ |
|---|---|---|
| العلامة التجارية | Texas Instruments | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| الوظيفة | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V | — |
| درجة حرارة التشغيل | 0 °C to +70 °C | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | ±60 mA (max) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold | ±200 mV | — |
| Quiescent Supply Current (enabled) | 30 mA (typical) | — |
| Shutdown Supply Current | 1 µA (typical) | — |
| العلبة | 8-pin PDIP (P) | 8-pin PDIP |
| نوع التركيب | Through-Hole | Through-hole |
| Standards Compliance | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 | — |
| حالة RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | RS-485/RS-422 transceiver |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Communication Mode | — | Half-duplex |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Maximum Data Rate | — | 2.5 Mbps |
| Slew Rate | — | Not limited |
| Driver Protection | — | Short-circuit current limited and protected |
| Interface Standards | — | RS-422 and RS-485 |
| Driver Output | — | Differential |
| Receiver Input | — | Differential |
| Power Class | — | Low-power transceiver |
| تيار السكون | — | [DATA_NEEDED: quiescent current] |
| Common-Mode Voltage | — | [DATA_NEEDED: common-mode voltage range] |
| ESD Protection | — | [DATA_NEEDED: ESD rating] |
| REACH Status | — | [DATA_NEEDED: REACH status] |