SN75176AP vs ISL8485IP مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SN75176AP بواسطة Texas Instruments و ISL8485IP بواسطة Renesas Electronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | SN75176AP | ISL8485IP |
|---|---|---|
| العلامة التجارية | Texas Instruments | Renesas Electronics |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | 1/1 differential bus transceiver | RS-485/RS-422 transceiver |
| جهد التغذية | 5 V | 4.5V to 5.5V |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Mode | Half-duplex | — |
| Driver Output | Three-state | — |
| Receiver Output | Three-state | — |
| Interface Standards | ANSI EIA/TIA-422-B and ITU Recommendation V.11 | — |
| Bus Architecture | Balanced multipoint transmission line | — |
| العلبة | 8-pin PDIP (P) | 8-pin DIP (8-PDIP) |
| نوع التركيب | Through-hole | Through-hole |
| درجة حرارة التشغيل | 0 °C to 70 °C | — |
| عدد الأطراف | 8 pins | — |
| Transceiver Direction | Bidirectional differential bus communication | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Manufacturer | — | Renesas Electronics |
| Transceiver Configuration | — | 1 transceiver, half-duplex |
| Nominal Supply Voltage | — | 5V |
| Maximum Data Rate | — | 5Mbps |
| Supported Standards | — | RS-485 and RS-422 |
| RS-485 Bus Loading | — | 1 unit load |
| Logic Family | — | BiCMOS |
| نطاق درجة حرارة التشغيل | — | [DATA_NEEDED: operating temperature range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Maximum Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |
| ESD Protection Rating | — | [DATA_NEEDED: ESD protection rating] |