SN75176BDR vs SP485EMN-L مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SN75176BDR بواسطة Texas Instruments و SP485EMN-L بواسطة MaxLinear. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | SN75176BDR | SP485EMN-L |
|---|---|---|
| العلامة التجارية | Texas Instruments | MaxLinear |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Differential bus transceiver | Half-duplex RS-422/RS-485 transceiver |
| جهد التغذية | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| نطاق درجة حرارة التشغيل | 0 °C to 70 °C | -40°C to +125°C |
| العلبة | SOIC (D), 8 pins | 8-pin SOIC |
| نوع التركيب | Surface mount | Surface-mount SOIC-8 |
| عدد الأطراف | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | Not qualified |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 10,000 kbps |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| تيار السكون | [DATA_NEEDED: quiescent current] | — |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Supported Protocols | — | RS-422 and RS-485 |
| Duplex Mode | — | Half-duplex |
| Process Technology | — | BiCMOS |
| ESD Tolerance, Human Body Model | — | More than ±15 kV |
| ESD Tolerance, IEC 61000-4-2 Air Discharge | — | More than ±15 kV |
| Operating Mode | — | Low-power operation |
| Supply Connection | — | 5 V |
| Package Body Width | — | 4.9 mm |