SP232ECP-L vs SP232EEP-L مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SP232ECP-L بواسطة MaxLinear و SP232EEP-L بواسطة MaxLinear. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | SP232ECP-L | SP232EEP-L |
|---|---|---|
| العلامة التجارية | MaxLinear | MaxLinear |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-232 line driver and receiver interface IC | RS-232 line-driver and receiver transceiver |
| Transceiver Configuration | 2/2 full RS-232 | — |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| جهد التغذية | +5 V single supply | — |
| ESD Tolerance | +/-15 kV human-body model | — |
| درجة حرارة التشغيل | 0 C to 70 C | — |
| Protocol Compatibility | RS-232-D and ITU V.28 | V.28 |
| Voltage Conversion | Integrated charge pump | — |
| العلبة | 16-pin PDIP | — |
| نوع التركيب | Through-hole | Through-hole |
| نوع الواجهة | Serial transceiver | — |
| Driver Output Type | [DATA_NEEDED: driver output type] | — |
| Receiver Input Range | [DATA_NEEDED: receiver input voltage range] | — |
| معدل البيانات | [DATA_NEEDED: maximum data rate] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Driver Count | — | 2 drivers |
| Receiver Count | — | 2 receivers |
| Duplex Configuration | — | Full duplex |
| Supply Voltage Range | — | 4.5V to 5.5V |
| Maximum Data Rate | — | 120kbps |
| Interface Standard | — | RS-232 |
| Human Body Model ESD Tolerance | — | ±15kV |
| IEC 61000-4-2 Air-Discharge ESD Tolerance | — | ±15kV |
| نطاق درجة حرارة التشغيل | — | -40°C to +85°C |
| Package Type | — | 16-pin PDIP |
| Charge-Pump Capacitors | — | External; [DATA_NEEDED: recommended capacitor values] |
| تيار التغذية | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage levels] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |