SP232EET-L vs SP232ECT-L مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SP232EET-L بواسطة MaxLinear و SP232ECT-L بواسطة MaxLinear. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | SP232EET-L | SP232ECT-L |
|---|---|---|
| العلامة التجارية | MaxLinear | MaxLinear |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-232 line transceiver | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Single Supply | Yes, 5 V | — |
| ESD Tolerance | ±15 kV Human Body Model | — |
| نطاق درجة حرارة التشغيل | -40°C to +85°C | — |
| العلبة | 16-pin SOIC | 16-SOIC (SOIC16W) |
| نوع التركيب | Surface mount | Surface Mount |
| Logic Level | CMOS | — |
| Protocol Support | RS-232 and V.28 | — |
| Lead-Free Status | Lead free | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| معدل البيانات | [DATA_NEEDED: maximum data rate] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| تيار السكون | [DATA_NEEDED: quiescent current] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| Manufacturer Page | SP232E product family | — |
| Device Type | — | 2/2 full RS-232 transceiver |
| Nominal Supply | — | 5 V |
| Protocol | — | RS-232 |
| Standard Compatibility | — | RS-232D and ITU V.28 |
| ESD Protection | — | +/-15 kV |
| درجة حرارة التشغيل | — | 0 C to +70 C |
| Package Body Width | — | 7.50 mm |
| Package Length | — | 10.3 mm |
| Packaging | — | Tape and Reel |
| Internal Technology | — | CMOS |
| RoHS | — | Yes |
| External Capacitors | — | [DATA_NEEDED: external capacitor requirement] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Level | — | [DATA_NEEDED: driver output levels] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |