SP3232EP-L vs MAX202CD مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SP3232EP-L بواسطة Sipex و MAX202CD بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | SP3232EP-L | MAX202CD |
|---|---|---|
| العلامة التجارية | Sipex | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-232 transceiver | Dual RS-232 line driver and receiver |
| Supply Voltage Range | +3.0 V to +5.5 V | 4.5 V to 5.5 V |
| Minimum Data Rate Under Full Load | 120 kbps | — |
| RS-232 Interoperability | Down to +2.7 V power source | — |
| Enhanced ESD Protection | ±15 kV | — |
| Compliance | True EIA/TIA-232-F standards from +3.0V to +5.5V power supply | — |
| Low-Power Shutdown | 1 µA with receivers active (SP3222) | — |
| العلبة | 16-pin SSOP | 16-pin SOIC |
| نوع التركيب | Surface mount | Surface mount |
| عدد الدبابيس | 16 | — |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| تيار التغذية | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Output Levels | [DATA_NEEDED: driver output voltage levels] | — |
| Receiver Input Levels | [DATA_NEEDED: receiver input voltage thresholds] | — |
| Slew Rate | [DATA_NEEDED: driver slew rate] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including ground |
| RS-232 Standard | — | TIA/EIA-232-F |
| Interface Function | — | Electrical interface between asynchronous communication controller and serial-port connector |
| Charge-Pump Circuit | — | Dual charge-pump circuit |
| Channel Configuration | — | 2 drivers and 2 receivers |
| تيار السكون | — | [DATA_NEEDED: quiescent current] |
| معدل البيانات | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver input threshold] |