SP3232EP-L vs MAX3232CD مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SP3232EP-L بواسطة Sipex و MAX3232CD بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
MAX3232CD - 2/2 RS-232 Transceiver, 250 kbit/s | Texas Instruments
MAX3232CD ✓ نشطمقارنة المواصفات
| المعامل | SP3232EP-L | MAX3232CD |
|---|---|---|
| العلامة التجارية | Sipex | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-232 transceiver | Multichannel RS-232 line driver/receiver |
| Supply Voltage Range | +3.0 V to +5.5 V | 3 V to 5.5 V |
| Minimum Data Rate Under Full Load | 120 kbps | — |
| RS-232 Interoperability | Down to +2.7 V power source | — |
| Enhanced ESD Protection | ±15 kV | — |
| Compliance | True EIA/TIA-232-F standards from +3.0V to +5.5V power supply | — |
| Low-Power Shutdown | 1 µA with receivers active (SP3222) | — |
| العلبة | 16-pin SSOP | 16-pin SOIC |
| نوع التركيب | Surface mount | Surface mount |
| عدد الدبابيس | 16 | — |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | 0 °C to 70 °C |
| تيار التغذية | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Output Levels | [DATA_NEEDED: driver output voltage levels] | — |
| Receiver Input Levels | [DATA_NEEDED: receiver input voltage thresholds] | — |
| Slew Rate | [DATA_NEEDED: driver slew rate] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Maximum Data Rate | — | 250 kbit/s |
| Logic Compatibility | — | Accepts 5 V logic |
| Typical Supply Current | — | 300 µA |
| ESD Protection | — | ±15 kV |
| External Capacitors | — | Required charge-pump capacitors; datasheet application uses 0.1 µF capacitors |
| RS-232 Standards | — | TIA/EIA-232-F and ITU V.28 |
| Lead Status | — | Lead-free |