SP485ES-L vs ISL83485IP مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SP485ES-L بواسطة MaxLinear و ISL83485IP بواسطة Renesas Electronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | SP485ES-L | ISL83485IP |
|---|---|---|
| العلامة التجارية | MaxLinear | Renesas Electronics |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-485/RS-422 half-duplex transceiver | RS-485/RS-422 transceiver |
| Transceiver Configuration | 1/1 transceiver | 1 driver / 1 receiver |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| Duplex Mode | Half duplex | Half duplex |
| Supported Standards | RS-485 and RS-422 | RS-485 and RS-422 |
| Maximum Data Rate | 5000 kbps | 10 Mbps |
| Logic Technology | BiCMOS | — |
| نطاق درجة حرارة التشغيل | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| العلبة | 8-PDIP | 8-pin PDIP |
| عدد الأطراف | 8 pins | — |
| نوع التركيب | Through-hole | Through-hole |
| جهد التغذية | [DATA_NEEDED: supply voltage range] | 3.3 V |
| تيار التغذية | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | [DATA_NEEDED: common-mode voltage range] |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | [DATA_NEEDED: ESD protection rating] |
| حالة RoHS | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Status | not_applicable | — |
| Process Technology | — | BiCMOS |
| Power Consumption Profile | — | Low power |
| Signal Type | — | Balanced differential |
| Driver Enable Control | — | [DATA_NEEDED: driver enable logic polarity and pin assignment] |
| Receiver Enable Control | — | [DATA_NEEDED: receiver enable logic polarity and pin assignment] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential receiver sensitivity] |
| Maximum Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |