ST10F276Z5Q3 vs SAF-XC886CM-8FFI5VAC مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ST10F276Z5Q3 بواسطة STMicroelectronics و SAF-XC886CM-8FFI5VAC بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
STMicroelectronics
ST10F276Z5Q3 - 64MHz 16-bit MCU, 832KB Flash, 144-PQFP | STMicroelectronics
ST10F276Z5Q3 ✓ نشطInfineon
SAF-XC886CM-8FFI5VAC - 8-bit MCU, 32KB Flash, CAN/LIN | Infineon
SAF-XC886CM-8FFI5VAC ✓ نشطمقارنة المواصفات
| المعامل | ST10F276Z5Q3 | SAF-XC886CM-8FFI5VAC |
|---|---|---|
| العلامة التجارية | STMicroelectronics | Infineon |
| الفئة | Microcontrollers | Microcontrollers |
| حالة دورة الحياة | نشط | نشط |
| Core Architecture | ST10 16-bit CISC with 4-stage pipeline | — |
| CPU Clock Frequency | 64 MHz max (50 ns instruction cycle) | — |
| Instruction Throughput | Up to 32 MIPS | — |
| Program Memory (Flash) | 832 Kbytes (832K x 8) | — |
| RAM | 68 Kbytes on-chip | 1.75 KB |
| DSP Extension | MAC unit, 16-bit multiplier, 40-bit accumulator | — |
| Linear Address Space | 16 Mbyte | — |
| A/D Converter | 12-channel on-chip | — |
| Communication Interfaces | CAN 2.0B, ASC, SSC | — |
| Timers / PWM | Capture/Compare, PWM timers | — |
| General-Purpose I/O | Up to 111 GPIO lines | — |
| Operating Voltage | [DATA_NEEDED: supply voltage range] | — |
| درجة حرارة التشغيل | [DATA_NEEDED: temperature grade] | -40 C to +125 C |
| العلبة | 144-pin PQFP (28 x 28 mm) | TQFP-48 (7x7 mm) |
| نوع التركيب | Surface Mount | Surface Mount |
| Boundary-Scan Support | Yes (JTAG) | — |
| حالة RoHS | Compliant (per alldatasheet listing) | Compliant |
| Halogen-Free Status | Not Compliant (per GlobalSpec listing) | — |
| Single-Cycle Context Switch | Yes | — |
| Enhanced Boolean Bit Manipulation | Yes | — |
| Core | — | XC800 (8-bit) |
| Family | — | XC88x |
| Flash Memory | — | 32 KB |
| عدد الأطراف | — | 48 |
| أقصى تردد للساعة | — | 24 MHz |
| جهد التغذية | — | 4.5 V to 5.5 V |
| CAN Interface | — | CAN 2.0B active (on-chip controller) |
| LIN Interface | — | Yes (LIN 1.3 / 2.0 slave/master) |
| ADC | — | 8-channel, 10-bit |
| PWM Unit | — | CCU6 (Capture/Compare Unit 6) |
| Watchdog | — | Window Watchdog + Brown-Out Detector |
| Terminal Form | — | GULL WING |
| Temperature Grade | — | INDUSTRIAL |