STM32F427IIT6 vs STM32F427VGT6 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ STM32F427IIT6 بواسطة STMicroelectronics و STM32F427VGT6 بواسطة STMicroelectronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
STMicroelectronics
STM32F427IIT6 - ARM Cortex-M4 MCU 180MHz 2MB Flash LQFP-176 | STMicroelectronics
STM32F427IIT6 ✓ نشطSTMicroelectronics
STM32F427VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | STMicroelectronics
STM32F427VGT6 ✓ نشطمقارنة المواصفات
| المعامل | STM32F427IIT6 | STM32F427VGT6 |
|---|---|---|
| العلامة التجارية | STMicroelectronics | STMicroelectronics |
| الفئة | Microcontrollers | Microcontrollers |
| حالة دورة الحياة | نشط | نشط |
| Core Architecture | ARM Cortex-M4 with FPU and DSP instructions | ARM 32-bit Cortex-M4 with FPU and DSP |
| Maximum CPU Frequency | 180 MHz | — |
| DMIPS Performance | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) | — |
| Flash Memory | 2 MB | — |
| SRAM | 256 KB (plus 4 KB backup SRAM) | 256 KB (192 KB + 64 KB CCM) |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| العلبة | 176-pin LQFP (24 x 24 mm, 0.5 mm pitch) | 100-pin LQFP (14x14 mm) |
| نطاق درجة حرارة التشغيل | -40C to +85C (industrial grade) | -40C to +85C (grade 6) |
| ADC | 3 x 12-bit, 2.4 MSPS | 3 x 12-bit, 2.4 MSPS |
| DAC | 2 x 12-bit | 2 x 12-bit |
| USB | USB 2.0 OTG FS + USB 2.0 OTG HS (with on-chip PHY) | — |
| Ethernet | 10/100 MAC with IEEE 1588v2 hardware time-stamping | — |
| Timers | Up to 17 (including motor-control timers) | Up to 17 (including 32-bit) |
| Communication Peripherals | UART/USART, SPI, I2C, CAN 2.0B, SAI, SDMMC | — |
| Graphics Accelerator | Chrom-ART (for TFT LCD) | — |
| ART Accelerator | Yes (0-wait-state Flash execution) | Yes - 0-wait-state Flash execution |
| نوع التركيب | Surface Mount (LQFP-176) | Surface Mount |
| حالة RoHS | Compliant | Compliant |
| أقصى تردد للساعة | — | 180 MHz |
| Performance | — | 225 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Program Flash Memory | — | 1 MB (1M x 8) |
| Supply Voltage (VDD/VDDA) | — | 2.0 V to 3.6 V (full performance); 1.8 V min |
| Communication Interfaces | — | USB OTG FS + HS PHY, 2x CAN 2.0B, Ethernet MAC, 6x USART/UART, 3x SPI, 4x I2C, 2x I2S, SDIO |
| Cryptography | — | AES 128/256, SHA-1/SHA-2, TRNG, hash |
| Display Controller | — | LCD-TFT (F427 line) |
| GPIO | — | Up to 114 (82 in LQFP-100) |
| مستوى MSL | — | 3 (JEDEC J-STD-020) |