TAS5711PHP vs TAS5731PHP مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ TAS5711PHP بواسطة Texas Instruments و TAS5731PHP بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
TAS5711PHP - 20W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)
TAS5711PHP ✓ نشطمقارنة المواصفات
| المعامل | TAS5711PHP | TAS5731PHP |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Digital audio power amplifier | — |
| Amplifier Class | Class D | — |
| Rated Output Power | 20 W | — |
| PVDD Operating Range | 8 V to 26 V | — |
| Maximum Efficiency | 90% | 90% |
| Channel Configuration | 2-channel stereo, 2.1 mode or quad configuration | — |
| Output Topology | Bridge-tied speaker drive | — |
| Digital Audio Input | Serial digital input | I²S input |
| Input Data Rate | Wide range supported by device family | — |
| Audio Processing | EQ and DRC | — |
| Filter Mode Support | AD and BD filter modes | — |
| Signal-to-Noise Ratio | 106 dB A-weighted | — |
| العلبة | 48-pin HTQFP, 7 mm x 7 mm | 48-pin HTQFP (PHP), 7 mm x 7 mm |
| Exposed Thermal Pad | 48-pin HTQFP EP | — |
| نوع التركيب | Surface mount | Surface mount |
| حالة دورة الحياة | Active | — |
| Compliance Status | Not specified in supplied verified data | — |
| Device Type | — | Open-loop digital-input Class-D audio amplifier |
| تكوين الخرج | — | 1-channel mono or 2-channel stereo |
| Stereo Output Power | — | 20 W |
| Mono Output Power | — | 41 W |
| Analog Power Supply Range | — | 8 V to 21.5 V |
| Digital Power Supply | — | 3.3 V |
| Output-Device On-Resistance | — | 70 mΩ |
| Channel Support | — | 2.1-channel support |
| نطاق درجة حرارة التشغيل | — | -40°C to 85°C |
| Lead-Free Status | — | Lead free |
| حالة RoHS | — | RoHS compliant |
| Digital Signal Processing | — | DSP and 2.1 mode |
| Sample Rate | — | [DATA_NEEDED: supported sample rate] |
| Speaker Load Impedance | — | [DATA_NEEDED: supported speaker load impedance] |
| Total Harmonic Distortion plus Noise | — | [DATA_NEEDED: THD+N condition and value] |